http://bugme.osdl.org/show_bug.cgi?id=603
Summary: 2.5.67: USB kills kernel on hotplug stop, wrong timer
handling?
Kernel Version: 2.5.67 proper
Status: NEW
Severity: high
Owner: greg@kroah.com
Submitter: andi@lisas.de
Distribution: Debian unstable
Hardware Environment: Dell Inspiron 8000, 2 USB ports
Software Environment:
Hotplug version: 0.0.20030117-7, gcc version 3.2.3 20030407 (Debian prerelease)
Problem Description:
After hours of trying to nail down my very annoying system shutdown crash, I
finally found that it's USB that's causing it.
Messages on /etc/init.d/hotplug start:
Apr 19 20:27:41 localhost kernel: drivers/usb/core/usb.c: registered new driver
usbfs
Apr 19 20:27:41 localhost kernel: drivers/usb/core/usb.c: registered new driver
hub
Apr 19 20:27:41 localhost kernel: Please use the 'usbfs' filetype instead, the '
usbdevfs' name is deprecated.
Apr 19 20:27:41 localhost kernel: drivers/usb/host/uhci-hcd.c: USB Universal Hos
t Controller Interface driver v2.0
Apr 19 20:27:41 localhost kernel: uhci-hcd 00:1f.2: Intel Corp. 82801BA/BAM USB
(Hub
Apr 19 20:27:41 localhost kernel: uhci-hcd 00:1f.2: irq 10, io base 0000dce0
Apr 19 20:27:41 localhost kernel: Please use the 'usbfs' filetype instead, the '
usbdevfs' name is deprecated.
Apr 19 20:27:41 localhost kernel: uhci-hcd 00:1f.2: new USB bus registered, assi
gned bus number 1
Apr 19 20:27:41 localhost kernel: drivers/usb/host/uhci-hcd.c: detected 2 ports
Apr 19 20:27:41 localhost kernel: usb usb1: Product: Intel Corp. 82801BA/BAM USB
(Hub
Apr 19 20:27:41 localhost kernel: usb usb1: Manufacturer: Linux 2.5.67 uhci-hcd
Apr 19 20:27:41 localhost kernel: usb usb1: SerialNumber: 00:1f.2
Apr 19 20:27:41 localhost kernel: hub 1-0:0: USB hub found
Apr 19 20:27:41 localhost kernel: hub 1-0:0: 2 ports detected
messages on /etc/init.d/hotplug stop (gathered using: while true; do sync; done):
Apr 19 20:28:23 localhost kernel: uhci-hcd 00:1f.2: remove, state 3
Apr 19 20:28:23 localhost kernel: usb usb1: USB disconnect, address 1
Apr 19 20:28:23 localhost kernel: uhci-hcd 00:1f.2: USB bus 1 deregistered
Apr 19 20:28:23 localhost kernel: uhci-hcd 00:1f.2: dangling refs (1) to bus 1!
Apr 19 20:28:23 localhost kernel: drivers/usb/core/usb.c: deregistering driver u
sbfs
Apr 19 20:28:23 localhost kernel: drivers/usb/core/usb.c: deregistering driver h
ub
[OOPS]
OOPS trace very similar to http://groups.google.de/groups?th=620852fd541f704e&rnum=6
Could it be that "dangling refs (1) to bus 1!" causes some distortion in proper
USB shutdown, causing USB to kfree() a timer without killing it before doing so?
Or maybe it's because of the usbfs vs. usbdevfs message?
The USB modules loaded at this time are:
uhci_hcd 32584 0
ohci_hcd 31104 0
usbcore 115892 4 uhci_hcd,ohci_hcd
Manually loading these modules instead of starting /etc/init.d/hotplug does
NOT cause a crash on shutdown.
And I NEVER plugged any USB device into the connectors.
root@note:/home/andi# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.05
S: Manufacturer=Linux 2.5.67 uhci-hcd
S: Product=Intel Corp. 82801BA/BAM USB (Hub
S: SerialNumber=00:1f.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
lspci:
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 02)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Apr 23 2003 - 22:00:26 EST