Hello,
At boot, probably while running hdparm to set specific parameters
for the IDE disks, I have the following messages :
hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete
DataRequest }
blk: queue c066f31c, I/O limit 4095mb (mask 0xffffffff)
hda: channel busy
hda: dma_timer_expiry: dma status == 0x60
hda: timeout waiting for DMA
hda: timeout waiting for DMA
hda: (__ide_dma_test_irq) called while not waiting
hdb: set_drive_speed_status: status=0xd0 { Busy }
blk: queue c066f648, I/O limit 4095mb (mask 0xffffffff)
hdb: channel busy
hda: dma_timer_expiry: dma status == 0x60
hda: timeout waiting for DMA
hda: timeout waiting for DMA
hda: (__ide_dma_test_irq) called while not waiting
Is this normal ?
Running again the same hdparm command line doesn't result in more
messages...
Regards,
Paul
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Apr 23 2003 - 22:00:27 EST