Linus,
The included patch cleans up the EISA code :
- Documentation update,
- Remove i386 EISA ID reservation (handled in the generic code),
- Add some preliminary support for EISA-like VLB cards (Adaptec 287x),
- Add some stricter dependancies on EISA_VIRTUAL_ROOT
- Preliminary support for EISA DMA,
- Much more conservative probing,
- EISA IDs list update (Compaq stuff).
Please apply.
M.
diff -ruN linux/Documentation/eisa.txt linux-eisa/Documentation/eisa.txt
--- linux/Documentation/eisa.txt 2003-04-21 18:10:21.000000000 +0200
+++ linux-eisa/Documentation/eisa.txt 2003-04-21 18:21:26.000000000 +0200
@@ -79,8 +79,9 @@
};
id_table : an array of NULL terminated EISA id strings,
- followed by an empty string. Each string can be
- paired with a driver-dependant value (driver_data).
+ followed by an empty string. Each string can
+ optionnaly be paired with a driver-dependant value
+ (driver_data).
driver : a generic driver, such as described in
Documentation/driver-model/driver.txt. Only .name,
@@ -88,19 +89,19 @@
An example is the 3c509 driver :
-struct eisa_device_id el3_eisa_ids[] = {
- { "TCM5092" },
- { "TCM5093" },
- { "" }
+static struct eisa_device_id vortex_eisa_ids[] = {
+ { "TCM5920", EISA_3C592_OFFSET },
+ { "TCM5970", EISA_3C597_OFFSET },
+ { "" }
};
-struct eisa_driver el3_eisa_driver = {
- .id_table = el3_eisa_ids,
- .driver = {
- .name = "3c509",
- .probe = el3_eisa_probe,
- .remove = __devexit_p (el3_device_remove)
- }
+static struct eisa_driver vortex_eisa_driver = {
+ .id_table = vortex_eisa_ids,
+ .driver = {
+ .name = "3c59x",
+ .probe = vortex_eisa_probe,
+ .remove = vortex_eisa_remove
+ }
};
** Device :
diff -ruN linux/arch/i386/kernel/traps.c linux-eisa/arch/i386/kernel/traps.c
--- linux/arch/i386/kernel/traps.c 2003-04-21 18:07:11.000000000 +0200
+++ linux-eisa/arch/i386/kernel/traps.c 2003-04-21 18:19:26.000000000 +0200
@@ -833,7 +833,6 @@
#ifdef CONFIG_EISA
int EISA_bus;
-static struct resource eisa_id = { "EISA ID", 0xc80, 0xc83, IORESOURCE_BUSY };
#endif
void __init trap_init(void)
@@ -841,8 +840,6 @@
#ifdef CONFIG_EISA
if (isa_readl(0x0FFFD9) == 'E'+('I'<<8)+('S'<<16)+('A'<<24)) {
EISA_bus = 1;
- if (request_resource(&ioport_resource, &eisa_id) == -EBUSY)
- printk ("EISA port was EBUSY :-(\n");
}
#endif
diff -ruN linux/drivers/eisa/Kconfig linux-eisa/drivers/eisa/Kconfig
--- linux/drivers/eisa/Kconfig 2003-04-21 18:07:58.000000000 +0200
+++ linux-eisa/drivers/eisa/Kconfig 2003-04-21 18:20:23.000000000 +0200
@@ -1,6 +1,17 @@
#
# EISA configuration
#
+config EISA_VLB_PRIMING
+ bool "Vesa Local Bus priming"
+ depends on X86_PC && EISA
+ default n
+ ---help---
+ Activate this option if your system contains a Vesa Local
+ Bus (VLB) card that identify itself as an EISA card (such as
+ the Adaptec AHA-284x).
+
+ When in doubt, say N.
+
config EISA_PCI_EISA
bool "Generic PCI/EISA bridge"
depends on PCI && EISA
@@ -12,9 +23,12 @@
When in doubt, say Y.
+# Using EISA_VIRTUAL_ROOT on something other than an Alpha or
+# an X86_PC may lead to crashes...
+
config EISA_VIRTUAL_ROOT
bool "EISA virtual root device"
- depends on EISA
+ depends on EISA && (ALPHA || X86_PC)
default y
---help---
Activate this option if your system only have EISA bus
diff -ruN linux/drivers/eisa/Makefile linux-eisa/drivers/eisa/Makefile
--- linux/drivers/eisa/Makefile 2003-04-21 18:09:25.000000000 +0200
+++ linux-eisa/drivers/eisa/Makefile 2003-04-21 18:21:18.000000000 +0200
@@ -1,5 +1,8 @@
# Makefile for the Linux device tree
+# Being anal sometimes saves a crash/reboot cycle... ;-)
+EXTRA_CFLAGS := -Werror
+
obj-$(CONFIG_EISA) += eisa-bus.o
obj-${CONFIG_EISA_PCI_EISA} += pci_eisa.o
diff -ruN linux/drivers/eisa/eisa-bus.c linux-eisa/drivers/eisa/eisa-bus.c
--- linux/drivers/eisa/eisa-bus.c 2003-04-21 18:07:49.000000000 +0200
+++ linux-eisa/drivers/eisa/eisa-bus.c 2003-04-21 18:20:17.000000000 +0200
@@ -56,13 +56,22 @@
u16 rev;
int i;
- sig[0] = inb (addr);
-
- if (sig[0] & 0x80)
- return NULL;
-
- for (i = 1; i < 4; i++)
+ for (i = 0; i < 4; i++) {
+#ifdef CONFIG_EISA_VLB_PRIMING
+ /*
+ * This ugly stuff is used to wake up VL-bus cards
+ * (AHA-284x is the only known example), so we can
+ * read the EISA id.
+ *
+ * Thankfully, this only exists on x86...
+ */
+ outb(0x80 + i, addr);
+#endif
sig[i] = inb (addr + i);
+
+ if (!i && (sig[0] & 0x80))
+ return NULL;
+ }
sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
@@ -123,47 +132,28 @@
static DEVICE_ATTR(signature, S_IRUGO, eisa_show_sig, NULL);
-static void __init eisa_register_device (struct eisa_root_device *root,
- char *sig, int slot)
+static int __init eisa_register_device (struct eisa_root_device *root,
+ struct eisa_device *edev,
+ char *sig, int slot)
{
- struct eisa_device *edev;
-
- if (!(edev = kmalloc (sizeof (*edev), GFP_KERNEL)))
- return;
-
- memset (edev, 0, sizeof (*edev));
- memcpy (edev->id.sig, sig, 7);
+ memcpy (edev->id.sig, sig, EISA_SIG_LEN);
edev->slot = slot;
edev->base_addr = SLOT_ADDRESS (root, slot);
+ edev->dma_mask = 0xffffffff; /* Default DMA mask */
eisa_name_device (edev);
edev->dev.parent = root->dev;
edev->dev.bus = &eisa_bus_type;
+ edev->dev.dma_mask = &edev->dma_mask;
sprintf (edev->dev.bus_id, "%02X:%02X", root->bus_nr, slot);
- /* Don't register resource for slot 0, since this will surely
- * fail... :-( */
+ edev->res.name = edev->dev.name;
- if (slot) {
- edev->res.name = edev->dev.name;
- edev->res.start = edev->base_addr;
- edev->res.end = edev->res.start + 0xfff;
- edev->res.flags = IORESOURCE_IO;
-
- if (request_resource (root->res, &edev->res)) {
- printk (KERN_WARNING \
- "Cannot allocate resource for EISA slot %d\n",
- slot);
- kfree (edev);
- return;
- }
- }
-
- if (device_register (&edev->dev)) {
- kfree (edev);
- return;
- }
+ if (device_register (&edev->dev))
+ return -1;
device_create_file (&edev->dev, &dev_attr_signature);
+
+ return 0;
}
static int __init eisa_probe (struct eisa_root_device *root)
@@ -171,54 +161,106 @@
int i, c;
char *str;
unsigned long sig_addr;
+ struct eisa_device *edev;
printk (KERN_INFO "EISA: Probing bus %d at %s\n",
root->bus_nr, root->dev->name);
for (c = 0, i = 0; i <= root->slots; i++) {
- sig_addr = SLOT_ADDRESS (root, i) + EISA_VENDOR_ID_OFFSET;
- if ((str = decode_eisa_sig (sig_addr))) {
- if (!i)
- printk (KERN_INFO "EISA: Motherboard %s detected\n",
- str);
- else {
- printk (KERN_INFO "EISA: slot %d : %s detected.\n",
- i, str);
+ if (!(edev = kmalloc (sizeof (*edev), GFP_KERNEL))) {
+ printk (KERN_ERR "EISA: Out of memory for slot %d\n",
+ i);
+ continue;
+ }
+
+ memset (edev, 0, sizeof (*edev));
- c++;
- }
+ /* Don't register resource for slot 0, since this is
+ * very likely to fail... :-( Instead, grab the EISA
+ * id, now we can display something in /proc/ioports.
+ */
+
+ if (i) {
+ edev->res.name = NULL;
+ edev->res.start = SLOT_ADDRESS (root, i);
+ edev->res.end = edev->res.start + 0xfff;
+ edev->res.flags = IORESOURCE_IO;
+ } else {
+ edev->res.name = NULL;
+ edev->res.start = SLOT_ADDRESS (root, i) + EISA_VENDOR_ID_OFFSET;
+ edev->res.end = edev->res.start + 3;
+ edev->res.flags = IORESOURCE_BUSY;
+ }
+
+ if (request_resource (root->res, &edev->res)) {
+ printk (KERN_WARNING \
+ "Cannot allocate resource for EISA slot %d\n",
+ i);
+ kfree (edev);
+ continue;
+ }
+
+ sig_addr = SLOT_ADDRESS (root, i) + EISA_VENDOR_ID_OFFSET;
+
+ if (!(str = decode_eisa_sig (sig_addr))) {
+ release_resource (&edev->res);
+ kfree (edev);
+ continue;
+ }
+
+ if (!i)
+ printk (KERN_INFO "EISA: Motherboard %s detected\n",
+ str);
+ else {
+ printk (KERN_INFO "EISA: slot %d : %s detected.\n",
+ i, str);
- eisa_register_device (root, str, i);
- }
+ c++;
+ }
+
+ if (eisa_register_device (root, edev, str, i)) {
+ printk (KERN_ERR "EISA: Failed to register %s\n", str);
+ release_resource (&edev->res);
+ kfree (edev);
+ }
}
printk (KERN_INFO "EISA: Detected %d card%s.\n", c, c == 1 ? "" : "s");
return 0;
}
-
-static LIST_HEAD (eisa_root_head);
+static struct resource eisa_root_res = {
+ .name = "EISA root resource",
+ .start = 0,
+ .end = 0xffffffff,
+ .flags = IORESOURCE_IO,
+};
static int eisa_bus_count;
-int eisa_root_register (struct eisa_root_device *root)
+int __init eisa_root_register (struct eisa_root_device *root)
{
- struct list_head *node;
- struct eisa_root_device *tmp_root;
+ int err;
- /* Check if this bus base address has been already
- * registered. This prevents the virtual root device from
- * registering after the real one has, for example... */
-
- list_for_each (node, &eisa_root_head) {
- tmp_root = list_entry (node, struct eisa_root_device, node);
- if (tmp_root->bus_base_addr == root->bus_base_addr)
- return -1; /* Space already taken, buddy... */
- }
+ /* Use our own resources to check if this bus base address has
+ * been already registered. This prevents the virtual root
+ * device from registering after the real one has, for
+ * example... */
+
+ root->eisa_root_res.name = eisa_root_res.name;
+ root->eisa_root_res.start = root->res->start;
+ root->eisa_root_res.end = root->res->end;
+ root->eisa_root_res.flags = IORESOURCE_BUSY;
+
+ if ((err = request_resource (&eisa_root_res, &root->eisa_root_res)))
+ return err;
root->bus_nr = eisa_bus_count++;
- list_add_tail (&root->node, &eisa_root_head);
- return eisa_probe (root);
+
+ if ((err = eisa_probe (root)))
+ release_resource (&root->eisa_root_res);
+
+ return err;
}
static int __init eisa_init (void)
diff -ruN linux/drivers/eisa/eisa.ids linux-eisa/drivers/eisa/eisa.ids
--- linux/drivers/eisa/eisa.ids 2003-04-21 18:05:41.000000000 +0200
+++ linux-eisa/drivers/eisa/eisa.ids 2003-04-21 18:19:07.000000000 +0200
@@ -162,6 +162,17 @@
CPQ0501 "Compaq DESKPRO/M System Board"
CPQ0509 "Compaq DESKPRO/M System Board with Audio"
CPQ0511 "Compaq SYSTEMPRO/LT System Board"
+CPQ0521 "Compaq DESKPRO XL System Board"
+CPQ0531 "Compaq ProSignia 500 System Board"
+CPQ0541 "Compaq ProSignia 300 System Board"
+CPQ0551 "Compaq ProLiant 2500 Server"
+CPQ0552 "Compaq ProLiant 2500 System Board"
+CPQ0553 "Compaq ProLiant 1600 System Board"
+CPQ0559 "Compaq ProLiant 1500 System Board"
+CPQ0561 "Compaq ProLiant 3000 System Board"
+CPQ0571 "Compaq ProSignia 200 Server"
+CPQ0579 "Compaq ProLiant 800 Server"
+CPQ0589 "Compaq ProLiant 850R"
CPQ0601 "Compaq ProSignia Server"
CPQ0609 "Compaq ProSignia Server"
CPQ0611 "Compaq ProSignia Server"
@@ -169,6 +180,30 @@
CPQ0629 "Compaq ProSignia Server (ASSY # 3154)"
CPQ0631 "Compaq ProLiant 1000 Server"
CPQ0639 "Compaq ProLiant 1000 Server"
+CPQ0671 "Compaq ProSignia 200"
+CPQ0679 "Compaq ProLiant 1850R"
+CPQ0680 "Compaq ProLiant CL1850 System Board"
+CPQ0681 "ProLiant CL380"
+CPQ0685 "Compaq ProLiant DL360"
+CPQ0686 "Compaq ProSignia 780"
+CPQ0687 "Compaq ProSignia 740"
+CPQ0688 "Compaq ProLiant 800 System Board"
+CPQ0689 "Compaq ProLiant 1600 System Board"
+CPQ0690 "Compaq ProLiant ML370"
+CPQ0691 "Compaq ProLiant 800"
+CPQ0692 "Compaq ProLiant DL380"
+CPQ0701 "Compaq ProSignia VS"
+CPQ0709 "Compaq ProLiant 3000 System Board"
+CPQ0711 "Compaq ProSignia VS"
+CPQ0712 "Compaq ProLiant ML530"
+CPQ0714 "Compaq ProLiant ML570"
+CPQ0715 "Compaq ProLiant DL580"
+CPQ0718 "Compaq TaskSmart N2400"
+CPQ071D "Compaq TaskSmart C2500"
+CPQ0808 "Compaq ProLiant 5500"
+CPQ0809 "Compaq ProLiant 6500 System Board"
+CPQ0810 "Compaq ProLiant 6400R System Board"
+CPQ0811 "Compaq ProLiant 1500 System Board"
CPQ1001 "Compaq Portable 486"
CPQ1009 "Compaq Portable 486/66"
CPQ1201 "Compaq DESKPRO 486/25"
@@ -178,6 +213,16 @@
CPQ1501 "Compaq SYSTEMPRO/XL Server"
CPQ1509 "Compaq ProLiant 4000 Server"
CPQ1519 "Compaq ProLiant 2000 Server"
+CPQ1529 "Compaq ProLiant 4500 Server"
+CPQ1561 "Compaq ProLiant 5000 System Board"
+CPQ1563 "Compaq ProLiant 6000 System Board"
+CPQ1565 "Compaq ProLiant 6500 System Board"
+CPQ1601 "Compaq ProLiant 7000"
+CPQ1602 "Compaq ProLiant 6000"
+CPQ1603 "Compaq Standard Peripherals Board"
+CPQ1608 "Compaq ProLiant 8500"
+CPQ1609 "Compaq ProLiant 8000"
+CPQ1669 "Compaq ProLiant 7000 System Board"
CPQ3001 "Compaq Advanced VGA"
CPQ3011 "Compaq QVision 1024/E Video Controller"
CPQ3021 "Compaq QVision 1024/I Video Controller"
@@ -189,27 +234,43 @@
CPQ4002 "Compaq Intelligent Drive Array Controller-2"
CPQ4010 "Compaq 32-Bit Intelligent Drive Array Expansion Controller"
CPQ4020 "Compaq SMART Array Controller"
+CPQ4030 "Compaq SMART-2/E Array Controller"
CPQ4300 "Compaq Advanced ESDI Fixed Disk Controller"
CPQ4401 "Compaq Integrated SCSI-2 Options Port"
CPQ4410 "Compaq Integrated 32-Bit Fast-SCSI-2 Controller"
CPQ4411 "Compaq 32-Bit Fast-SCSI-2 Controller"
CPQ4420 "Compaq 6260 SCSI-2 Controller"
+CPQ4430 "Compaq 32-Bit Fast-Wide SCSI-2/E Controller"
+CPQ4431 "Compaq 32-Bit Fast-Wide SCSI-2/E Controller"
CPQ5000 "Compaq 386/33 System Processor Board used as Secondary"
+CPQ5251 "Compaq 5/133 System Processor Board-2MB"
+CPQ5253 "Compaq 5/166 System Processor Board-2MB"
+CPQ5255 "Compaq 5/133 System Processor Board-1MB"
+CPQ525D "Compaq 5/100 System Processor Board-1MB"
CPQ5281 "Compaq 486/50 System Processor Board used as Secondary"
CPQ5282 "Compaq 486/50 System Processor Board used as Secondary"
CPQ5287 "Compaq 5/66 System Processor Board used as Secondary"
+CPQ528A "Compaq 5/100 System Processor Board w/ Transaction Blaster"
+CPQ528B "Compaq 5/100 System Processor Board"
CPQ528F "Compaq 486DX2/66 System Processor Board used as Secondary"
+CPQ529B "Compaq 5/90 System Processor Board"
+CPQ529F "Compaq 5/133 System Processor Board"
+CPQ52A0 "Compaq System Processor"
CPQ5900 "Compaq 486/33 System Processor Board used as Secondary"
CPQ5A00 "Compaq 486/33 System Processor Board (ASSY # 002013) used as Secondary"
CPQ5B00 "Compaq 486DX2/66 System Processor Board used as Secondary"
CPQ5C00 "Compaq 486/33 System Processor Board used as Secondary"
CPQ6000 "Compaq 32-Bit DualSpeed Token Ring Controller"
CPQ6001 "Compaq 32-Bit DualSpeed Token Ring Controller"
-CPQ6100 "Compaq 32-Bit NetFlex Controller"
+CPQ6002 "Compaq NetFlex-2 TR"
+CPQ6100 "Compaq NetFlex ENET-TR"
CPQ6101 "Compaq NetFlex-2 Controller"
CPQ6200 "Compaq DualPort Ethernet Controller"
+CPQ6300 "Compaq NetFlex-2 DualPort TR"
CPQ7000 "Compaq 32-Bit Server Manager/R Board"
CPQ7001 "Compaq 32-Bit Server Manager/R Board"
+CPQ7100 "Compaq Remote Insight Board"
+CPQ7200 "Compaq StorageWorks Fibre Channel Host Bus Adapter/E"
CPQ9004 "Compaq 386/33 Processor Board"
CPQ9005 "Compaq 386/25 Processor Board"
CPQ9013 "Compaq 486DX2/66 System Processor Board used as Primary"
@@ -232,16 +293,60 @@
CPQ9045 "Compaq 5/60 Processor Board"
CPQ9046 "Compaq 5/60 Processor Board"
CPQ9047 "Compaq 5/60 Processor Board"
+CPQ9251 "Compaq 5/133 System Processor Board-2MB"
+CPQ9253 "Compaq 5/166 System Processor Board-2MB"
+CPQ9255 "Compaq 5/133 System Processor Board-1MB"
+CPQ925D "Compaq 5/100 System Processor Board-1MB"
+CPQ925F "ProLiant 2500 Dual Pentium Pro Processor Board"
+CPQ9267 "Compaq Pentium II Processor Board"
+CPQ9278 "Compaq Processor Board"
+CPQ9279 "Compaq Processor Board"
+CPQ9280 "Compaq Processor Board"
CPQ9281 "Compaq 486/50 System Processor Board used as Primary"
CPQ9282 "Compaq 486/50 System Processor Board used as Primary"
+CPQ9283 "Processor Modules"
+CPQ9285 "Processor Modules"
+CPQ9286 "Compaq Slot-1 Terminator Board"
CPQ9287 "Compaq 5/66 System Processor Board used as Primary"
+CPQ928A "Compaq 5/100 System Processor Board w/ Transaction Blaster"
+CPQ928B "Compaq 5/100 System Processor Board"
CPQ928F "Compaq 486DX2/66 System Processor Board used as Primary"
+CPQ929B "Compaq 5/90 System Processor Board"
+CPQ929F "Compaq 5/133 System Processor Board"
+CPQ92A0 "Compaq ProLiant 1500 Processor Board"
+CPQ92A4 "Compaq System Processor Board"
+CPQ92B0 "Compaq Processor Board"
+CPQ92B1 "Compaq FRC Processor Board"
+CPQ92B2 "Compaq Terminator Board"
+CPQ92B3 "6/200 FlexSMP Dual Processor Board"
+CPQ92B4 "Compaq Processor Board"
+CPQ92B5 "Compaq Terminator Board"
+CPQ92B6 "Compaq Processor Board"
+CPQ92B7 "Compaq Processor(s)"
+CPQ92B8 "Compaq Terminator Board"
+CPQ92B9 "Compaq Terminator Board"
+CPQ9351 "Compaq 5/133 System Processor Board-2MB"
+CPQ9353 "Compaq 5/166 System Processor Board-2MB"
+CPQ9355 "Compaq 5/133 System Processor Board-1MB"
+CPQ935D "Compaq 5/100 System Processor Board-1MB"
CPQ9381 "Compaq 486/50 System Processor Board"
CPQ9382 "Compaq 486/50 System Processor Board"
CPQ9387 "Compaq 5/66 System Processor Board"
+CPQ938A "Compaq 5/100 System Processor Board w/ Transaction Blaster"
+CPQ938B "Compaq 5/100 System Processor Board"
+CPQ939B "Compaq 5/90 System Processor Board"
+CPQ939F "Compaq 5/133 System Processor Board"
+CPQ9451 "Compaq 5/133 System Processor Board-2MB"
+CPQ9453 "Compaq 5/166 System Processor Board-2MB"
+CPQ9455 "Compaq 5/133 System Processor Board-1MB"
+CPQ945D "Compaq 5/100 System Processor Board-1MB"
CPQ9481 "Compaq 486/50 System Processor Board"
CPQ9482 "Compaq 486/50 System Processor Board"
CPQ9487 "Compaq 5/66 System Processor Board"
+CPQ948A "Compaq 5/100 System Processor Board w/ Transaction Blaster"
+CPQ948B "Compaq 5/100 System Processor Board"
+CPQ949B "Compaq 5/90 System Processor Board"
+CPQ949F "Compaq 5/133 System Processor Board"
CPQ9901 "Compaq 486SX/16 Processor Board"
CPQ9902 "Compaq 486SX/16 Processor Board"
CPQ9903 "Compaq 486SX/25 Processor Board"
@@ -261,12 +366,21 @@
CPQ9991 "Compaq 386/33 Desktop Processor Board"
CPQ9999 "Compaq 486/33 System Processor Board used as Primary"
CPQ999A "Compaq 486/33 Desktop Processor Board"
+CPQ9A83 "Compaq DESKPRO XL Processor Board"
+CPQ9AA1 "Compaq ProSignia 500 Processor Board"
+CPQ9AA2 "Compaq ProSignia 300 Processor Board"
CPQA000 "Compaq Enhanced Option Slot Serial Board"
CPQA010 "Compaq Enhanced Option Slot Modem Board"
+CPQA015 "Compaq Integrated Remote Console (IRC)"
CPQA020 "Compaq Integrated CD Rom Adapter"
CPQA030 "Compaq Integrated CD Rom Adapter"
+CPQA040 "Compaq Automatic Server Recovery (ASR)"
+CPQA045 "Compaq Integrated Management Display Information"
CPQF000 "Compaq Fixed Disk Drive Feature"
CPQF100 "Compaq Ethernet 16TP Controller"
+CPQF110 "Compaq Token Ring 16TR Controller"
+CPQF120 "Compaq NetFlex-3/E Controller"
+CPQF140 "Compaq NetFlex-3/E Controller"
CPQFA0D "Compaq SYSTEMPRO 4-Socket System Memory Board"
CPQFA0E "Compaq SYSTEMPRO 6-Socket System Memory Board"
CPQFA0F "Compaq DESKPRO 486/25 System Memory Board"
@@ -274,8 +388,11 @@
CPQFA1B "Compaq DESKPRO 486/50 System Memory Board"
CPQFA1C "Compaq System Memory Expansion Board"
CPQFA1D "Compaq SYSTEMPRO/XL Memory Expansion Board"
+CPQFA1E "Compaq Memory Expansion Board"
CPQFB03 "Compaq Async/Parallel Printer Intf Assy 000990"
CPQFB07 "Compaq DESKPRO 2400 Baud Modem"
+CPQFB09 "Compaq SpeedPaq 144/I Modem"
+CPQFB11 "Compaq Internal 28.8/33.6 Data+Fax Modem"
CPQFC0B "Compaq Advanced Graphics 1024 Board"
CPQFD08 "Compaq 135Mb, 150/250Mb Tape Adapter"
CPQFD13 "Compaq 15MHz ESDI Fixed Disk Controller 001283"
diff -ruN linux/include/linux/eisa.h linux-eisa/include/linux/eisa.h
--- linux/include/linux/eisa.h 2003-04-21 18:11:17.000000000 +0200
+++ linux-eisa/include/linux/eisa.h 2003-04-21 18:22:28.000000000 +0200
@@ -25,13 +25,15 @@
};
/* There is not much we can say about an EISA device, apart from
- * signature, slot number, and base address. */
+ * signature, slot number, and base address. dma_mask is set by
+ * default to 32 bits.*/
struct eisa_device {
struct eisa_device_id id;
int slot;
unsigned long base_addr;
struct resource res;
+ u64 dma_mask;
struct device dev; /* generic device */
};
@@ -63,12 +65,12 @@
* busses (PA-RISC ?), so we try to handle that. */
struct eisa_root_device {
- struct list_head node;
struct device *dev; /* Pointer to bridge device */
struct resource *res;
unsigned long bus_base_addr;
int slots; /* Max slot number */
int bus_nr; /* Set by eisa_root_register */
+ struct resource eisa_root_res; /* ditto */
};
int eisa_root_register (struct eisa_root_device *root);
-- Places change, faces change. Life is so very strange. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Apr 23 2003 - 22:00:29 EST