I have a Soyo KT400 motherboard with an onboard Highpoint HPT372 IDE
controller. The system consistently crashes if (and only if as far as
I can tell) I read from drives on this controller at the same time as
exercising a PCI card. Redhat's 2.4.18-27.8.0 just locks solid, but with
2.4.20 and 3.4.21-rc1 I get an Oops.
Sometimes I get messages like this right before the oops:
hdc: dma_timer_expiry: dma status == 0x24
hdc: lost interrupt
hdc: dma_intr: bad DMA status (dma_stat=30)
hdc: dma_intr: status=0x50 { DriveReady SeekComplete }
ksymoops output:
ksymoops 2.4.5 on i686 2.4.21-rc1. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.21-rc1/ (default)
-m /boot/System.map-2.4.21-rc1 (default)
-i
Unable to handle kernel NULL pointer dereference at virtual address 00000024
c01bb8c2
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c01bb8c2>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010046
eax: c162e380 ebx: 00000050 ecx: 00000005 edx: 0000a007
esi: c030a870 edi: 00000000 ebp: c030a7c0 esp: c02b3ee0
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c02b3000)
Stack: 0000a007 00000016 00000016 c030a870 c162e380 c01bb850 c01b45f4 c030a870
c030a870 00000000 00000286 c162e3a4 c01b4550 fffffffe 00000046 c0122e7e
c162e380 c162e2a4 c162e2a4 00000000 c02d3dc0 fffffffe 00000046 c011eb82
Call Trace: [<c01bb850>] [<c01b45f4>] [<c01b4550>] [<c0122e7e>] [<c011eb82>]
[<c011ea96>] [<c011e8d4>] [<c010a53e>] [<c010ca98>] [<c0106ec3>] [<c0114818>]
[<c0114770>] [<c0114770>] [<c0106f32>] [<c0105000>]
Code: 8b 5f 24 85 db 7e 22 8d b4 26 00 00 00 00 2b 5f 38 8b 86 a4
>>EIP; c01bb8c2 <ide_dma_intr+72/c0> <=====
>>eax; c162e380 <_end+1313700/204f2400>
>>edx; 0000a007 Before first symbol
>>esi; c030a870 <ide_hwifs+950/2b20>
>>ebp; c030a7c0 <ide_hwifs+8a0/2b20>
>>esp; c02b3ee0 <init_task_union+1ee0/2000>
Trace; c01bb850 <ide_dma_intr+0/c0>
Trace; c01b45f4 <ide_timer_expiry+a4/1b0>
Trace; c01b4550 <ide_timer_expiry+0/1b0>
Trace; c0122e7e <run_timer_list+ee/160>
Trace; c011eb82 <bh_action+22/40>
Trace; c011ea96 <tasklet_hi_action+46/70>
Trace; c011e8d4 <do_softirq+94/a0>
Trace; c010a53e <do_IRQ+9e/a0>
Trace; c010ca98 <call_do_IRQ+5/d>
Trace; c0106ec3 <default_idle+23/30>
Trace; c0114818 <apm_cpu_idle+a8/130>
Trace; c0114770 <apm_cpu_idle+0/130>
Trace; c0114770 <apm_cpu_idle+0/130>
Trace; c0106f32 <cpu_idle+42/60>
Trace; c0105000 <_stext+0/0>
Code; c01bb8c2 <ide_dma_intr+72/c0>
00000000 <_EIP>:
Code; c01bb8c2 <ide_dma_intr+72/c0> <=====
0: 8b 5f 24 mov 0x24(%edi),%ebx <=====
Code; c01bb8c5 <ide_dma_intr+75/c0>
3: 85 db test %ebx,%ebx
Code; c01bb8c7 <ide_dma_intr+77/c0>
5: 7e 22 jle 29 <_EIP+0x29>
Code; c01bb8c9 <ide_dma_intr+79/c0>
7: 8d b4 26 00 00 00 00 lea 0x0(%esi,1),%esi
Code; c01bb8d0 <ide_dma_intr+80/c0>
e: 2b 5f 38 sub 0x38(%edi),%ebx
Code; c01bb8d3 <ide_dma_intr+83/c0>
11: 8b 86 a4 00 00 00 mov 0xa4(%esi),%eax
<0>Kernel panic: Aiee, killing interrupt handler!
lspci -vvv:
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3189
Subsystem: VIA Technologies, Inc.: Unknown device 3189
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4
Command: RQ=31 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b168 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
Subsystem: LSI Logic / Symbios Logic: Unknown device 1000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 16000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 9000 [size=256]
Region 1: Memory at e7002000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at e7001000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:09.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
Subsystem: LSI Logic / Symbios Logic: Unknown device 1000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 16000ns max), cache line size 08
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 9400 [size=256]
Region 1: Memory at e7003000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at e7004000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:0a.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 9800 [size=128]
Region 1: Memory at e7000000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2064W [Millennium] (rev 01) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 12
Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16K]
Region 1: Memory at e5000000 (32-bit, prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:0e.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Soyo Computer, Inc: Unknown device a715
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 9c00 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 RAID bus controller: Triones Technologies, Inc. HPT366/368/370/370A/372 (rev 05)
Subsystem: Triones Technologies, Inc. HPT370A
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 120 (2000ns min, 2000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at a400 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at ac00 [size=4]
Region 4: I/O ports at b000 [size=256]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 12
Region 4: I/O ports at b400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at b800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at bc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 10
Interrupt: pin D routed to IRQ 5
Region 0: Memory at e7005000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
Subsystem: VIA Technologies, Inc. VT8233A ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at c000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
Subsystem: VIA Technologies, Inc.: Unknown device 0102
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at c400 [size=256]
Region 1: Memory at e7006000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
/proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(tm) XP 2100+
stepping : 1
cpu MHz : 1733.438
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr sse syscall mmxext
3dnowext 3dnow
bogomips : 3460.30
/proc/ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
9000-90ff : LSI Logic / Symbios Logic (formerly NCR) 53c875
9000-907f : sym53c8xx
9400-94ff : LSI Logic / Symbios Logic (formerly NCR) 53c875 (#2)
9400-947f : sym53c8xx
9800-987f : 3Com Corporation 3c905B 100BaseTX [Cyclone]
9800-987f : 00:0a.0
9c00-9cff : C-Media Electronics Inc CM8738
a000-a007 : Triones Technologies, Inc. HPT366/368/370/370A/372
a000-a007 : ide2
a400-a403 : Triones Technologies, Inc. HPT366/368/370/370A/372
a402-a402 : ide2
a800-a807 : Triones Technologies, Inc. HPT366/368/370/370A/372
a800-a807 : ide3
ac00-ac03 : Triones Technologies, Inc. HPT366/368/370/370A/372
ac02-ac02 : ide3
b000-b0ff : Triones Technologies, Inc. HPT366/368/370/370A/372
b000-b007 : ide2
b008-b00f : ide3
b010-b0ff : HPT372
b400-b41f : VIA Technologies, Inc. USB
b400-b41f : usb-uhci
b800-b81f : VIA Technologies, Inc. USB (#2)
b800-b81f : usb-uhci
bc00-bc1f : VIA Technologies, Inc. USB (#3)
bc00-bc1f : usb-uhci
c000-c00f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
c000-c007 : ide0
c008-c00f : ide1
c400-c4ff : VIA Technologies, Inc. VT6102 [Rhine-II]
c400-c4ff : via-rhine
/proc/iomem:
00000000-0009e7ff : System RAM
0009e800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000cb7ff : Extension ROM
000cc000-000cfbff : Extension ROM
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-0023ba11 : Kernel code
0023ba12-002b14a3 : Kernel data
1fff0000-1fff2fff : ACPI Non-volatile Storage
1fff3000-1fffffff : ACPI Tables
e0000000-e3ffffff : VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge
e4000000-e4003fff : Matrox Graphics, Inc. MGA 2064W [Millennium]
e5000000-e57fffff : Matrox Graphics, Inc. MGA 2064W [Millennium]
e7000000-e700007f : 3Com Corporation 3c905B 100BaseTX [Cyclone]
e7001000-e7001fff : LSI Logic / Symbios Logic (formerly NCR) 53c875
e7002000-e70020ff : LSI Logic / Symbios Logic (formerly NCR) 53c875
e7003000-e70030ff : LSI Logic / Symbios Logic (formerly NCR) 53c875 (#2)
e7004000-e7004fff : LSI Logic / Symbios Logic (formerly NCR) 53c875 (#2)
e7005000-e70050ff : VIA Technologies, Inc. USB 2.0
e7005000-e70050ff : ehci-hcd
e7006000-e70060ff : VIA Technologies, Inc. VT6102 [Rhine-II]
e7006000-e70060ff : via-rhine
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
/proc/interrupts:
CPU0
0: 1338584 XT-PIC timer
1: 20 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 0 XT-PIC ehci-hcd
8: 1 XT-PIC rtc
10: 33040 XT-PIC sym53c8xx, usb-uhci
11: 7261355 XT-PIC ide2, ide3, sym53c8xx, usb-uhci, eth1
12: 66695 XT-PIC usb-uhci, eth0, PS/2 Mouse
14: 2702836 XT-PIC ide0
15: 1931929 XT-PIC ide1
NMI: 0
ERR: 0
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Apr 30 2003 - 22:00:33 EST