Hello,
add a new driver for the cx24110 frontend by Peter Hettkamp
<peter.hettkamp@t-online.de>
Please review and apply.
Thanks
Michael Hunold.
diff -uNrwB -x '*.o' --new-file linux-2.5.69/drivers/media/dvb/frontends/cx24110.c linux-2.5.69.patch/drivers/media/dvb/frontends/cx24110.c
--- linux-2.5.69/drivers/media/dvb/frontends/cx24110.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.5.69.patch/drivers/media/dvb/frontends/cx24110.c 2003-04-30 12:02:50.000000000 +0200
@@ -0,0 +1,672 @@
+/*
+ cx24110 - Single Chip Satellite Channel Receiver driver module
+ used on the the Pinnacle PCTV Sat cards
+
+ Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@t-online.de> based on
+ work
+ Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+/* currently drives the Conexant cx24110 and cx24106 QPSK decoder chips,
+ connected via i2c to a Conexant Fusion 878 (this uses the standard
+ linux bttv driver). The tuner chip is supposed to be the Conexant
+ cx24108 digital satellite tuner, driven through the tuner interface
+ of the cx24110. SEC is also supplied by the cx24110.
+
+ Oct-2002: Migrate to API V3 (formerly known as NEWSTRUCT)
+*/
+
+#include <asm/errno.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "dvb_frontend.h"
+#include "dvb_functions.h"
+
+static int debug = 0;
+#define dprintk if (debug) printk
+
+
+static
+struct dvb_frontend_info cx24110_info = {
+ name: "Conexant CX24110 with CX24108 tuner, aka HM1221/HM1811",
+ type: FE_QPSK,
+ frequency_min: 950000,
+ frequency_max: 2150000,
+ frequency_stepsize: 1011, /* kHz for QPSK frontends, can be reduced to 253kHz on the cx24108 tuner */
+ frequency_tolerance: 29500,
+ symbol_rate_min: 1000000,
+ symbol_rate_max: 45000000,
+/* symbol_rate_tolerance: ???,*/
+ notifier_delay: 50, /* 1/20 s */
+ caps: FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK |
+ FE_CAN_CLEAN_SETUP
+};
+/* fixme: are these values correct? especially ..._tolerance and caps */
+
+
+static
+struct {u8 reg; u8 data;} cx24110_regdata[]=
+ /* Comments beginning with @ denote this value should
+ be the default */
+ {{0x09,0x01}, /* SoftResetAll */
+ {0x09,0x00}, /* release reset */
+ {0x01,0xe8}, /* MSB of code rate 27.5MS/s */
+ {0x02,0x17}, /* middle byte " */
+ {0x03,0x29}, /* LSB " */
+ {0x05,0x03}, /* @ DVB mode, standard code rate 3/4 */
+ {0x06,0xa5}, /* @ PLL 60MHz */
+ {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */
+ {0x0a,0x00}, /* @ partial chip disables, do not set */
+ {0x0b,0x01}, /* set output clock in gapped mode, start signal low
+ active for first byte */
+ {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */
+ {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */
+ {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1
+ to avoid starting the BER counter. Reset the
+ CRC test bit. Finite counting selected */
+ {0x15,0xff}, /* @ size of the limited time window for RS BER
+ estimation. It is <value>*256 RS blocks, this
+ gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
+ {0x16,0x00}, /* @ enable all RS output ports */
+ {0x17,0x04}, /* @ time window allowed for the RS to sync */
+ {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned
+ for automatically */
+ /* leave the current code rate and normalization
+ registers as they are after reset... */
+ {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting
+ only once */
+ {0x23,0x18}, /* @ size of the limited time window for Viterbi BER
+ estimation. It is <value>*65536 channel bits, i.e.
+ approx. 38ms at 27.5MS/s, rate 3/4 */
+ {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */
+ /* leave front-end AGC parameters at default values */
+ /* leave decimation AGC parameters at default values */
+ {0x35,0x40}, /* disable all interrupts. They are not connected anyway */
+ {0x36,0xff}, /* clear all interrupt pending flags */
+ {0x37,0x00}, /* @ fully enable AutoAcqq state machine */
+ {0x38,0x07}, /* @ enable fade recovery, but not autostart AutoAcq */
+ /* leave the equalizer parameters on their default values */
+ /* leave the final AGC parameters on their default values */
+ {0x41,0x00}, /* @ MSB of front-end derotator frequency */
+ {0x42,0x00}, /* @ middle bytes " */
+ {0x43,0x00}, /* @ LSB " */
+ /* leave the carrier tracking loop parameters on default */
+ /* leave the bit timing loop parameters at gefault */
+ {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */
+ /* the cx24108 data sheet for symbol rates above 15MS/s */
+ {0x57,0x00}, /* @ Filter sigma delta enabled, positive */
+ {0x61,0x95}, /* GPIO pins 1-4 have special function */
+ {0x62,0x05}, /* GPIO pin 5 has special function, pin 6 is GPIO */
+ {0x63,0x00}, /* All GPIO pins use CMOS output characteristics */
+ {0x64,0x20}, /* GPIO 6 is input, all others are outputs */
+ {0x6d,0x30}, /* tuner auto mode clock freq 62kHz */
+ {0x70,0x15}, /* use auto mode, tuner word is 21 bits long */
+ {0x73,0x00}, /* @ disable several demod bypasses */
+ {0x74,0x00}, /* @ " */
+ {0x75,0x00} /* @ " */
+ /* the remaining registers are for SEC */
+ };
+
+
+static
+int cx24110_writereg (struct dvb_i2c_bus *i2c, int reg, int data)
+{
+ u8 buf [] = { reg, data };
+ struct i2c_msg msg = { addr: 0x55, flags: 0, buf: buf, len: 2 };
+/* fixme (medium): HW allows any i2c address. 0x55 is the default, but the
+ cx24110 might show up at any address */
+ int err;
+
+ if ((err = i2c->xfer (i2c, &msg, 1)) != 1) {
+ dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __FUNCTION__, err, reg, data);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+
+static
+u8 cx24110_readreg (struct dvb_i2c_bus *i2c, u8 reg)
+{
+ int ret;
+ u8 b0 [] = { reg };
+ u8 b1 [] = { 0 };
+ struct i2c_msg msg [] = { { addr: 0x55, flags: 0, buf: b0, len: 1 },
+ { addr: 0x55, flags: I2C_M_RD, buf: b1, len: 1 } };
+/* fixme (medium): address might be different from 0x55 */
+ ret = i2c->xfer (i2c, msg, 2);
+
+ if (ret != 2)
+ dprintk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret);
+
+ return b1[0];
+}
+
+
+static
+int cx24108_write (struct dvb_i2c_bus *i2c, u32 data)
+{
+/* tuner data is 21 bits long, must be left-aligned in data */
+/* tuner cx24108 is written through a dedicated 3wire interface on the demod chip */
+/* fixme (low): add error handling, avoid infinite loops if HW fails... */
+
+dprintk("cx24110 debug: cx24108_write(%8.8x)\n",data);
+
+ cx24110_writereg(i2c,0x6d,0x30); /* auto mode at 62kHz */
+ cx24110_writereg(i2c,0x70,0x15); /* auto mode 21 bits */
+ /* if the auto tuner writer is still busy, clear it out */
+ while(cx24110_readreg(i2c,0x6d)&0x80) cx24110_writereg(i2c,0x72,0);
+ /* write the topmost 8 bits */
+ cx24110_writereg(i2c,0x72,(data>>24)&0xff);
+ /* wait for the send to be completed */
+ while((cx24110_readreg(i2c,0x6d)&0xc0)==0x80);
+ /* send another 8 bytes */
+ cx24110_writereg(i2c,0x72,(data>>16)&0xff);
+ while((cx24110_readreg(i2c,0x6d)&0xc0)==0x80);
+ /* and the topmost 5 bits of this byte */
+ cx24110_writereg(i2c,0x72,(data>>8)&0xff);
+ while((cx24110_readreg(i2c,0x6d)&0xc0)==0x80);
+ /* now strobe the enable line once */
+ cx24110_writereg(i2c,0x6d,0x32);
+ cx24110_writereg(i2c,0x6d,0x30);
+
+ return 0;
+}
+
+
+static
+int cx24108_set_tv_freq (struct dvb_i2c_bus *i2c, u32 freq)
+{
+/* fixme (low): error handling */
+ int i, a, n, pump;
+ u32 band, pll;
+
+
+ static const u32 osci[]={ 950000,1019000,1075000,1178000,
+ 1296000,1432000,1576000,1718000,
+ 1856000,2036000,2150000};
+ static const u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,
+ 0x00101000,0x00102000,0x00104000,
+ 0x00108000,0x00110000,0x00120000,
+ 0x00140000};
+
+#define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
+ dprintk("cx24110 debug: cx24108_set_tv_freq, freq=%d\n",freq);
+
+ if(freq<950000) freq=950000; /* kHz */
+ if(freq>2150000) freq=2150000; /* satellite IF is 950..2150MHz */
+ /* decide which VCO to use for the input frequency */
+ for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
+ dprintk("cx24110 debug: select vco #%d (f=%d)\n",i,freq);
+ band=bandsel[i];
+ /* the gain values must be set by SetSymbolrate */
+ /* compute the pll divider needed, from Conexant data sheet,
+ resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4,
+ depending on the divider bit. It is set to /4 on the 2 lowest
+ bands */
+ n=((i<=2?2:1)*freq*10L)/(XTAL/100);
+ a=n%32; n/=32; if(a==0) n--;
+ pump=(freq<(osci[i-1]+osci[i])/2);
+ pll=0xf8000000|
+ ((pump?1:2)<<(14+11))|
+ ((n&0x1ff)<<(5+11))|
+ ((a&0x1f)<<11);
+ /* everything is shifted left 11 bits to left-align the bits in the
+ 32bit word. Output to the tuner goes MSB-aligned, after all */
+ dprintk("cx24110 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
+ cx24108_write(i2c,band);
+ /* set vga and vca to their widest-band settings, as a precaution.
+ SetSymbolrate might not be called to set this up */
+ cx24108_write(i2c,0x500c0000);
+ cx24108_write(i2c,0x83f1f800);
+ cx24108_write(i2c,pll);
+ cx24110_writereg(i2c,0x56,0x7f);
+
+ dvb_delay(HZ/10); /* wait a moment for the tuner pll to lock */
+
+ /* tuner pll lock can be monitored on GPIO pin 4 of cx24110 */
+ while(!(cx24110_readreg(i2c,0x66)&0x20)&&i<1000) i++;
+ dprintk("cx24110 debug: GPIO IN=%2.2x(loop=%d)\n",
+ cx24110_readreg(i2c,0x66),i);
+ return 0;
+
+}
+
+
+static
+int cx24110_init (struct dvb_i2c_bus *i2c)
+{
+/* fixme (low): error handling */
+ int i;
+
+ dprintk("%s: init chip\n", __FUNCTION__);
+
+ for(i=0;i<sizeof(cx24110_regdata)/sizeof(cx24110_regdata[0]);i++) {
+ cx24110_writereg(i2c,cx24110_regdata[i].reg,cx24110_regdata[i].data);
+ };
+
+ return 0;
+}
+
+
+static
+int cx24110_set_inversion (struct dvb_i2c_bus *i2c, fe_spectral_inversion_t inversion)
+{
+/* fixme (low): error handling */
+
+ switch (inversion) {
+ case INVERSION_OFF:
+ cx24110_writereg(i2c,0x37,cx24110_readreg(i2c,0x37)|0x1);
+ /* AcqSpectrInvDis on. No idea why someone should want this */
+ cx24110_writereg(i2c,0x5,cx24110_readreg(i2c,0x5)&0xf7);
+ /* Initial value 0 at start of acq */
+ cx24110_writereg(i2c,0x22,cx24110_readreg(i2c,0x22)&0xef);
+ /* current value 0 */
+ /* The cx24110 manual tells us this reg is read-only.
+ But what the heck... set it ayways */
+ break;
+ case INVERSION_ON:
+ cx24110_writereg(i2c,0x37,cx24110_readreg(i2c,0x37)|0x1);
+ /* AcqSpectrInvDis on. No idea why someone should want this */
+ cx24110_writereg(i2c,0x5,cx24110_readreg(i2c,0x5)|0x08);
+ /* Initial value 1 at start of acq */
+ cx24110_writereg(i2c,0x22,cx24110_readreg(i2c,0x22)|0x10);
+ /* current value 1 */
+ break;
+ case INVERSION_AUTO:
+ cx24110_writereg(i2c,0x37,cx24110_readreg(i2c,0x37)&0xfe);
+ /* AcqSpectrInvDis off. Leave initial & current states as is */
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static
+int cx24110_set_fec (struct dvb_i2c_bus *i2c, fe_code_rate_t fec)
+{
+/* fixme (low): error handling */
+
+ static const int rate[]={-1,1,2,3,5,7,-1};
+ static const int g1[]={-1,0x01,0x02,0x05,0x15,0x45,-1};
+ static const int g2[]={-1,0x01,0x03,0x06,0x1a,0x7a,-1};
+
+ /* Well, the AutoAcq engine of the cx24106 and 24110 automatically
+ searches all enabled viterbi rates, and can handle non-standard
+ rates as well. */
+
+ if (fec>FEC_AUTO)
+ fec=FEC_AUTO;
+
+ if(fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */
+ cx24110_writereg(i2c,0x37,cx24110_readreg(i2c,0x37)&0xdf);
+ /* clear AcqVitDis bit */
+ cx24110_writereg(i2c,0x18,0xae);
+ /* allow all DVB standard code rates */
+ cx24110_writereg(i2c,0x05,(cx24110_readreg(i2c,0x05)&0xf0)|0x3);
+ /* set nominal Viterbi rate 3/4 */
+ cx24110_writereg(i2c,0x22,(cx24110_readreg(i2c,0x22)&0xf0)|0x3);
+ /* set current Viterbi rate 3/4 */
+ cx24110_writereg(i2c,0x1a,0x05); cx24110_writereg(i2c,0x1b,0x06);
+ /* set the puncture registers for code rate 3/4 */
+ return 0;
+ } else {
+ cx24110_writereg(i2c,0x37,cx24110_readreg(i2c,0x37)|0x20);
+ /* set AcqVitDis bit */
+ if(rate[fec]>0) {
+ cx24110_writereg(i2c,0x05,(cx24110_readreg(i2c,0x05)&0xf0)|rate[fec]);
+ /* set nominal Viterbi rate */
+ cx24110_writereg(i2c,0x22,(cx24110_readreg(i2c,0x22)&0xf0)|rate[fec]);
+ /* set current Viterbi rate */
+ cx24110_writereg(i2c,0x1a,g1[fec]);
+ cx24110_writereg(i2c,0x1b,g2[fec]);
+ /* not sure if this is the right way: I always used AutoAcq mode */
+ } else return -EOPNOTSUPP;
+/* fixme (low): which is the correct return code? */
+ };
+ return 0;
+}
+
+
+static
+fe_code_rate_t cx24110_get_fec (struct dvb_i2c_bus *i2c)
+{
+ int i;
+
+ i=cx24110_readreg(i2c,0x22)&0x0f;
+ if(!(i&0x08)) {
+ return FEC_1_2 + i - 1;
+ } else {
+/* fixme (low): a special code rate has been selected. In theory, we need to
+ return a denominator value, a numerator value, and a pair of puncture
+ maps to correctly describe this mode. But this should never happen in
+ practice, because it cannot be set by cx24110_get_fec. */
+ return FEC_NONE;
+ }
+}
+
+
+static
+int cx24110_set_symbolrate (struct dvb_i2c_bus *i2c, u32 srate)
+{
+/* fixme (low): add error handling */
+ u32 ratio;
+ u32 tmp, fclk, BDRI;
+
+ static const u32 bands[]={5000000UL,15000000UL,90999000UL/2};
+ static const u32 vca[]={0x80f03800,0x81f0f800,0x83f1f800};
+ static const u32 vga[]={0x5f8fc000,0x580f0000,0x500c0000};
+ static const u8 filtune[]={0xa2,0xcc,0x66};
+ int i;
+
+dprintk("cx24110 debug: entering %s(%d)\n",__FUNCTION__,srate);
+ if (srate>90999000UL/2)
+ srate=90999000UL/2;
+ if (srate<500000)
+ srate=500000;
+
+ for(i=0;(i<sizeof(bands)/sizeof(bands[0]))&&(srate>bands[i]);i++);
+ /* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz,
+ and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult,
+ R06[3:0] PLLphaseDetGain */
+ tmp=cx24110_readreg(i2c,0x07)&0xfc;
+ if(srate<90999000UL/4) { /* sample rate 45MHz*/
+ cx24110_writereg(i2c,0x07,tmp);
+ cx24110_writereg(i2c,0x06,0x78);
+ fclk=90999000UL/2;
+ } else if(srate<60666000UL/2) { /* sample rate 60MHz */
+ cx24110_writereg(i2c,0x07,tmp|0x1);
+ cx24110_writereg(i2c,0x06,0xa5);
+ fclk=60666000UL;
+ } else if(srate<80888000UL/2) { /* sample rate 80MHz */
+ cx24110_writereg(i2c,0x07,tmp|0x2);
+ cx24110_writereg(i2c,0x06,0x87);
+ fclk=80888000UL;
+ } else { /* sample rate 90MHz */
+ cx24110_writereg(i2c,0x07,tmp|0x3);
+ cx24110_writereg(i2c,0x06,0x78);
+ fclk=90999000UL;
+ };
+ dprintk("cx24110 debug: fclk %d Hz\n",fclk);
+ /* we need to divide two integers with approx. 27 bits in 32 bit
+ arithmetic giving a 25 bit result */
+ /* the maximum dividend is 90999000/2, 0x02b6446c, this number is
+ also the most complex divisor. Hence, the dividend has,
+ assuming 32bit unsigned arithmetic, 6 clear bits on top, the
+ divisor 2 unused bits at the bottom. Also, the quotient is
+ always less than 1/2. Borrowed from VES1893.c, of course */
+
+ tmp=srate<<6;
+ BDRI=fclk>>2;
+ ratio=(tmp/BDRI);
+
+ tmp=(tmp%BDRI)<<8;
+ ratio=(ratio<<8)+(tmp/BDRI);
+
+ tmp=(tmp%BDRI)<<8;
+ ratio=(ratio<<8)+(tmp/BDRI);
+
+ tmp=(tmp%BDRI)<<1;
+ ratio=(ratio<<1)+(tmp/BDRI);
+
+ dprintk("srate= %d (range %d, up to %d)\n", srate,i,bands[i]);
+ dprintk("fclk = %d\n", fclk);
+ dprintk("ratio= %08x\n", ratio);
+
+ cx24110_writereg(i2c, 0x1, (ratio>>16)&0xff);
+ cx24110_writereg(i2c, 0x2, (ratio>>8)&0xff);
+ cx24110_writereg(i2c, 0x3, (ratio)&0xff);
+
+ /* please see the cx24108 data sheet, this controls tuner gain
+ and bandwidth settings depending on the symbol rate */
+ cx24108_write(i2c,vga[i]);
+ cx24108_write(i2c,vca[i]); /* gain is set on tuner chip */
+ cx24110_writereg(i2c,0x56,filtune[i]); /* bw is contolled by filtune voltage */
+
+ return 0;
+
+}
+
+
+static
+int cx24110_set_voltage (struct dvb_i2c_bus *i2c, fe_sec_voltage_t voltage)
+{
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ return cx24110_writereg(i2c,0x76,(cx24110_readreg(i2c,0x76)&0x3b)|0xc0);
+ case SEC_VOLTAGE_18:
+ return cx24110_writereg(i2c,0x76,(cx24110_readreg(i2c,0x76)&0x3b)|0x40);
+ default:
+ return -EINVAL;
+ };
+}
+
+
+static
+int cx24110_ioctl (struct dvb_frontend *fe, unsigned int cmd, void *arg)
+{
+ struct dvb_i2c_bus *i2c = fe->i2c;
+ static int lastber=0, lastbyer=0,lastbler=0, lastesn0=0, sum_bler=0;
+
+ switch (cmd) {
+ case FE_GET_INFO:
+ memcpy (arg, &cx24110_info, sizeof(struct dvb_frontend_info));
+ break;
+
+ case FE_READ_STATUS:
+ {
+ fe_status_t *status = arg;
+ int sync = cx24110_readreg (i2c, 0x55);
+
+ *status = 0;
+
+ if (sync & 0x10)
+ *status |= FE_HAS_SIGNAL;
+
+ if (sync & 0x08)
+ *status |= FE_HAS_CARRIER;
+
+ sync = cx24110_readreg (i2c, 0x08);
+
+ if (sync & 0x40)
+ *status |= FE_HAS_VITERBI;
+
+ if (sync & 0x20)
+ *status |= FE_HAS_SYNC;
+
+ if ((sync & 0x60) == 0x60)
+ *status |= FE_HAS_LOCK;
+
+ if(cx24110_readreg(i2c,0x10)&0x40) {
+ /* the RS error counter has finished one counting window */
+ cx24110_writereg(i2c,0x10,0x60); /* select the byer reg */
+ lastbyer=cx24110_readreg(i2c,0x12)|
+ (cx24110_readreg(i2c,0x13)<<8)|
+ (cx24110_readreg(i2c,0x14)<<16);
+ cx24110_writereg(i2c,0x10,0x70); /* select the bler reg */
+ lastbler=cx24110_readreg(i2c,0x12)|
+ (cx24110_readreg(i2c,0x13)<<8)|
+ (cx24110_readreg(i2c,0x14)<<16);
+ cx24110_writereg(i2c,0x10,0x20); /* start new count window */
+ sum_bler += lastbler;
+ }
+ if(cx24110_readreg(i2c,0x24)&0x10) {
+ /* the Viterbi error counter has finished one counting window */
+ cx24110_writereg(i2c,0x24,0x04); /* select the ber reg */
+ lastber=cx24110_readreg(i2c,0x25)|
+ (cx24110_readreg(i2c,0x26)<<8);
+ cx24110_writereg(i2c,0x24,0x04); /* start new count window */
+ cx24110_writereg(i2c,0x24,0x14);
+ }
+ if(cx24110_readreg(i2c,0x6a)&0x80) {
+ /* the Es/N0 error counter has finished one counting window */
+ lastesn0=cx24110_readreg(i2c,0x69)|
+ (cx24110_readreg(i2c,0x68)<<8);
+ cx24110_writereg(i2c,0x6a,0x84); /* start new count window */
+ }
+ break;
+ }
+
+ case FE_READ_BER:
+ {
+ u32 *ber = (u32 *) arg;
+
+ *ber = lastber;
+/* fixme (maybe): value range is 16 bit. Scale? */
+ break;
+ }
+
+ case FE_READ_SIGNAL_STRENGTH:
+ {
+/* no provision in hardware. Read the frontend AGC accumulator. No idea how to scale this, but I know it is 2s complement */
+ u8 signal = cx24110_readreg (i2c, 0x27)+128;
+ *((u16*) arg) = (signal << 8) | signal;
+ break;
+ }
+
+ case FE_READ_SNR:
+ {
+/* no provision in hardware. Can be computed from the Es/N0 estimator, but I don't know how. */
+ *(u16*) arg = lastesn0;
+ break;
+ }
+
+ case FE_READ_UNCORRECTED_BLOCKS:
+ {
+ *(u16*) arg = sum_bler&0xffff;
+ sum_bler=0;
+ break;
+ }
+
+ case FE_SET_FRONTEND:
+ {
+ struct dvb_frontend_parameters *p = arg;
+
+ cx24108_set_tv_freq (i2c, p->frequency);
+ cx24110_set_inversion (i2c, p->inversion);
+ cx24110_set_fec (i2c, p->u.qpsk.fec_inner);
+ cx24110_set_symbolrate (i2c, p->u.qpsk.symbol_rate);
+ cx24110_writereg(i2c,0x04,0x05); /* start aquisition */
+ break;
+ }
+
+ case FE_GET_FRONTEND:
+ {
+ struct dvb_frontend_parameters *p = arg;
+ s32 afc; unsigned sclk;
+
+/* cannot read back tuner settings (freq). Need to have some private storage */
+
+ sclk = cx24110_readreg (i2c, 0x07) & 0x03;
+/* ok, real AFC (FEDR) freq. is afc/2^24*fsamp, fsamp=45/60/80/90MHz. Need 64 bit arithmetic. Is thiss possible in the kernel? */
+ if (sclk==0) sclk=90999000L/2L;
+ else if (sclk==1) sclk=60666000L;
+ else if (sclk==2) sclk=80888000L;
+ else sclk=90999000L;
+ sclk>>=8;
+ afc = sclk*(cx24110_readreg (i2c, 0x44)&0x1f)+
+ ((sclk*cx24110_readreg (i2c, 0x45))>>8)+
+ ((sclk*cx24110_readreg (i2c, 0x46))>>16);
+
+ p->frequency += afc;
+ p->inversion = (cx24110_readreg (i2c, 0x22) & 0x10) ?
+ INVERSION_ON : INVERSION_OFF;
+ p->u.qpsk.fec_inner = cx24110_get_fec (i2c);
+ break;
+ }
+
+ case FE_SLEEP:
+/* cannot do this from the FE end. How to communicate this to the place where it can be done? */
+ break;
+ case FE_INIT:
+ return cx24110_init (i2c);
+
+ case FE_RESET:
+/* no idea what to do for this call */
+/* fixme (medium): fill me in */
+ break;
+
+ case FE_SET_TONE:
+ return cx24110_writereg(i2c,0x76,(cx24110_readreg(i2c,0x76)&~0x10)|((((fe_sec_tone_mode_t) arg)==SEC_TONE_ON)?0x10:0));
+ case FE_SET_VOLTAGE:
+ return cx24110_set_voltage (i2c, (fe_sec_voltage_t) arg);
+
+ default:
+ return -EOPNOTSUPP;
+ };
+
+ return 0;
+}
+
+
+static
+int cx24110_attach (struct dvb_i2c_bus *i2c)
+{
+ u8 sig;
+
+ sig=cx24110_readreg (i2c, 0x00);
+ if ( sig != 0x5a && sig != 0x69 )
+ return -ENODEV;
+
+ dvb_register_frontend (cx24110_ioctl, i2c, NULL, &cx24110_info);
+
+ return 0;
+}
+
+
+static
+void cx24110_detach (struct dvb_i2c_bus *i2c)
+{
+ dvb_unregister_frontend (cx24110_ioctl, i2c);
+}
+
+
+static
+int __init init_cx24110 (void)
+{
+ return dvb_register_i2c_device (THIS_MODULE, cx24110_attach, cx24110_detach);
+}
+
+
+static
+void __exit exit_cx24110 (void)
+{
+ dvb_unregister_i2c_device (cx24110_attach);
+}
+
+
+module_init(init_cx24110);
+module_exit(exit_cx24110);
+
+
+MODULE_DESCRIPTION("DVB Frontend driver module for the Conexant cx24108/cx24110 chipset");
+MODULE_AUTHOR("Peter Hettkamp");
+MODULE_LICENSE("GPL");
+MODULE_PARM(debug,"i");
+
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed May 07 2003 - 22:00:27 EST