Hello,
this patch updates the following dvb frontend drivers:
- alps_bsrv2.c
- alps_tdmb7.c
- at76c651.c
- grundig_29504-401.c
- grundig_29504-491.c
- nxt6000.c
- ves1820.c
Really improved has been the following driver:
- stv0299.c
Please review and apply.
Thanks
Michael Hunold.
diff -uNrwB -x '*.o' --new-file linux-2.5.69/drivers/media/dvb/frontends/Kconfig linux-2.5.69.patch/drivers/media/dvb/frontends/Kconfig
--- linux-2.5.69/drivers/media/dvb/frontends/Kconfig 2003-05-06 13:15:32.000000000 +0200
+++ linux-2.5.69.patch/drivers/media/dvb/frontends/Kconfig 2003-04-20 10:15:32.000000000 +0200
@@ -5,10 +5,9 @@
tristate "STV0299 based DVB-S frontend (QPSK)"
depends on DVB_CORE
help
- A DVB-S tuner module.
-
- Say Y when you want to support frontend based on this
- demodulator.
+ The stv0299 by ST is used in many DVB-S tuner modules,
+ say Y when you want to support frontends based on this
+ DVB-S demodulator.
Some examples are the Alps BSRU6, the Philips SU1278 and
the LG TDQB-S00x.
@@ -63,6 +62,17 @@
DVB adapter simply enable all supported frontends, the
right one will get autodetected.
+config DVB_CX24110
+ tristate "Frontends with Connexant CX24110 demodulator (QPSK)"
+ depends on DVB_CORE
+ help
+ The CX24110 Demodulator is used in some DVB-S frontends.
+ Say Y if you want support for this chip in your kernel.
+
+ If you don't know what tuner module is soldered on your
+ DVB adapter simply enable all supported frontends, the
+ right one will get autodetected.
+
config DVB_GRUNDIG_29504_491
tristate "Grundig 29504-491 (QPSK)"
depends on DVB_CORE
diff -uNrwB -x '*.o' --new-file linux-2.5.69/drivers/media/dvb/frontends/Makefile linux-2.5.69.patch/drivers/media/dvb/frontends/Makefile
--- linux-2.5.69/drivers/media/dvb/frontends/Makefile 2003-05-06 13:15:32.000000000 +0200
+++ linux-2.5.69.patch/drivers/media/dvb/frontends/Makefile 2003-04-20 10:15:32.000000000 +0200
@@ -9,6 +9,7 @@
obj-$(CONFIG_DVB_ALPS_TDLB7) += alps_tdlb7.o
obj-$(CONFIG_DVB_ALPS_TDMB7) += alps_tdmb7.o
obj-$(CONFIG_DVB_ATMEL_AT76C651) += at76c651.o
+obj-$(CONFIG_DVB_CX24110) += cx24110.o
obj-$(CONFIG_DVB_GRUNDIG_29504_491) += grundig_29504-491.o
obj-$(CONFIG_DVB_GRUNDIG_29504_401) += grundig_29504-401.o
obj-$(CONFIG_DVB_VES1820) += ves1820.o
diff -uNrwB -x '*.o' --new-file linux-2.5.69/drivers/media/dvb/frontends/alps_bsrv2.c linux-2.5.69.patch/drivers/media/dvb/frontends/alps_bsrv2.c
--- linux-2.5.69/drivers/media/dvb/frontends/alps_bsrv2.c 2003-05-06 13:15:32.000000000 +0200
+++ linux-2.5.69.patch/drivers/media/dvb/frontends/alps_bsrv2.c 2003-04-17 19:19:27.000000000 +0200
@@ -20,8 +20,12 @@
*/
+#include <asm/errno.h>
+#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
@@ -211,7 +215,7 @@
u32 BDRI;
u32 tmp;
- dprintk("%s: srate == %d\n", __FUNCTION__, srate);
+ dprintk("%s: srate == %ud\n", __FUNCTION__, (unsigned int) srate);
if (srate > 90100000UL/2)
srate = 90100000UL/2;
@@ -257,9 +261,9 @@
BDRI = ( ((FIN << 8) / ((srate << (FNR >> 1)) >> 2)) + 1) >> 1;
dprintk("FNR= %d\n", FNR);
- dprintk("ratio= %08x\n", ratio);
- dprintk("BDR= %08x\n", BDR);
- dprintk("BDRI= %02x\n", BDRI);
+ dprintk("ratio= %08x\n", (unsigned int) ratio);
+ dprintk("BDR= %08x\n", (unsigned int) BDR);
+ dprintk("BDRI= %02x\n", (unsigned int) BDRI);
if (BDRI > 0xff)
BDRI = 0xff;
@@ -387,12 +391,12 @@
case FE_GET_FRONTEND:
{
struct dvb_frontend_parameters *p = arg;
- s32 afc;
+ int afc;
afc = ((int)((char)(ves1893_readreg (i2c, 0x0a) << 1)))/2;
- afc = (afc * (int)(p->u.qpsk.symbol_rate/8))/16;
+ afc = (afc * (int)(p->u.qpsk.symbol_rate/1000/8))/16;
- p->frequency += afc;
+ p->frequency -= afc;
p->inversion = (ves1893_readreg (i2c, 0x0f) & 2) ?
INVERSION_ON : INVERSION_OFF;
p->u.qpsk.fec_inner = ves1893_get_fec (i2c);
diff -uNrwB -x '*.o' --new-file linux-2.5.69/drivers/media/dvb/frontends/alps_tdmb7.c linux-2.5.69.patch/drivers/media/dvb/frontends/alps_tdmb7.c
--- linux-2.5.69/drivers/media/dvb/frontends/alps_tdmb7.c 2003-05-06 13:15:32.000000000 +0200
+++ linux-2.5.69.patch/drivers/media/dvb/frontends/alps_tdmb7.c 2003-04-30 12:02:38.000000000 +0200
@@ -20,10 +20,15 @@
*/
+#include <asm/errno.h>
+#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
+#include "dvb_functions.h"
static int debug = 0;
@@ -52,14 +57,6 @@
static
-inline void ddelay (int timeout)
-{
- current->state=TASK_INTERRUPTIBLE;
- schedule_timeout(timeout);
-}
-
-
-static
u8 init_tab [] = {
0x04, 0x10,
0x05, 0x09,
@@ -154,7 +151,7 @@
freq < 470000000 ? 0x42 : freq < 862000000 ? 0x41 : 0x81 };
#endif
- dprintk ("%s: freq == %i, div == %i\n", __FUNCTION__, freq, div);
+ dprintk ("%s: freq == %i, div == %i\n", __FUNCTION__, (int) freq, (int) div);
return pll_write (i2c, buf);
}
@@ -170,7 +167,7 @@
cx22700_writereg (i2c, 0x00, 0x02); /* soft reset */
cx22700_writereg (i2c, 0x00, 0x00);
- ddelay (HZ/100);
+ dvb_delay (HZ/100);
for (i=0; i<sizeof(init_tab); i+=2)
cx22700_writereg (i2c, init_tab[i], init_tab[i+1]);
@@ -355,7 +352,7 @@
}
case FE_READ_BER:
- *((uint32_t*) arg) = cx22700_readreg (i2c, 0x0c) & 0x7f;
+ *((u32*) arg) = cx22700_readreg (i2c, 0x0c) & 0x7f;
cx22700_writereg (i2c, 0x0c, 0x00);
break;
@@ -363,18 +360,18 @@
{
u16 rs_ber = (cx22700_readreg (i2c, 0x0d) << 9)
| (cx22700_readreg (i2c, 0x0e) << 1);
- *((uint16_t*) arg) = ~rs_ber;
+ *((u16*) arg) = ~rs_ber;
break;
}
case FE_READ_SNR:
{
u16 rs_ber = (cx22700_readreg (i2c, 0x0d) << 9)
| (cx22700_readreg (i2c, 0x0e) << 1);
- *((uint16_t*) arg) = ~rs_ber;
+ *((u16*) arg) = ~rs_ber;
break;
}
case FE_READ_UNCORRECTED_BLOCKS:
- *((uint32_t*) arg) = cx22700_readreg (i2c, 0x0f);
+ *((u32*) arg) = cx22700_readreg (i2c, 0x0f);
cx22700_writereg (i2c, 0x0f, 0x00);
break;
diff -uNrwB -x '*.o' --new-file linux-2.5.69/drivers/media/dvb/frontends/at76c651.c linux-2.5.69.patch/drivers/media/dvb/frontends/at76c651.c
--- linux-2.5.69/drivers/media/dvb/frontends/at76c651.c 2003-05-06 13:15:32.000000000 +0200
+++ linux-2.5.69.patch/drivers/media/dvb/frontends/at76c651.c 2003-04-30 12:03:26.000000000 +0200
@@ -22,11 +22,12 @@
*
*/
-#include <linux/module.h>
+#include <asm/errno.h>
#include <linux/init.h>
-#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
#include <linux/slab.h>
-#include <linux/i2c.h>
#if defined(__powerpc__)
#include <asm/bitops.h>
@@ -34,6 +35,7 @@
#include "dvb_frontend.h"
#include "dvb_i2c.h"
+#include "dvb_functions.h"
static int debug = 0;
@@ -67,8 +69,8 @@
FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 | FE_CAN_QAM_128 |
- FE_CAN_QAM_256,
- /* FE_CAN_QAM_512 | FE_CAN_QAM_1024 | */
+ FE_CAN_QAM_256 /* | FE_CAN_QAM_512 | FE_CAN_QAM_1024 */ |
+ FE_CAN_RECOVER | FE_CAN_CLEAN_SETUP | FE_CAN_MUTE_TS
};
@@ -103,7 +105,7 @@
"(reg == 0x%02x, val == 0x%02x, ret == %i)\n",
__FUNCTION__, reg, data, ret);
- mdelay(10);
+ dvb_delay(10);
return (ret != 1) ? -EREMOTEIO : 0;
diff -uNrwB -x '*.o' --new-file linux-2.5.69/drivers/media/dvb/frontends/grundig_29504-401.c linux-2.5.69.patch/drivers/media/dvb/frontends/grundig_29504-401.c
--- linux-2.5.69/drivers/media/dvb/frontends/grundig_29504-401.c 2003-05-06 13:15:32.000000000 +0200
+++ linux-2.5.69.patch/drivers/media/dvb/frontends/grundig_29504-401.c 2003-04-30 12:02:33.000000000 +0200
@@ -22,10 +22,15 @@
*/
-#include <linux/module.h>
+#include <asm/errno.h>
#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
+#include "dvb_functions.h"
static int debug = 0;
@@ -97,22 +102,27 @@
/**
* set up the downconverter frequency divisor for a
* reference clock comparision frequency of 166666 Hz.
- * frequency offset is 36000000 Hz.
+ * frequency offset is 36125000 Hz.
*/
static
int tsa5060_set_tv_freq (struct dvb_i2c_bus *i2c, u32 freq)
{
u32 div;
u8 buf [4];
- u8 cfg;
+ u8 cfg, cpump, band_select;
- div = (36000000 + freq) / 166666;
+ div = (36125000 + freq) / 166666;
cfg = 0x88;
+ cpump = div < 175000000 ? 2 : div < 390000000 ? 1 :
+ div < 470000000 ? 2 : div < 750000000 ? 1 : 3;
+
+ band_select = div < 175000000 ? 0x0e : div < 470000000 ? 0x05 : 0x03;
+
buf [0] = (div >> 8) & 0x7f;
buf [1] = div & 0xff;
buf [2] = ((div >> 10) & 0x60) | cfg;
- buf [3] = 0xc0;
+ buf [3] = cpump | band_select;
return tsa5060_write (i2c, buf);
}
diff -uNrwB -x '*.o' --new-file linux-2.5.69/drivers/media/dvb/frontends/grundig_29504-491.c linux-2.5.69.patch/drivers/media/dvb/frontends/grundig_29504-491.c
--- linux-2.5.69/drivers/media/dvb/frontends/grundig_29504-491.c 2003-05-06 13:15:32.000000000 +0200
+++ linux-2.5.69.patch/drivers/media/dvb/frontends/grundig_29504-491.c 2003-04-30 12:03:38.000000000 +0200
@@ -24,10 +24,15 @@
*/
+#include <asm/errno.h>
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
+#include "dvb_functions.h"
static int debug = 0;
#define dprintk if (debug) printk
@@ -222,7 +227,7 @@
tmp = (tmp % srate) << 8;
ratio = (ratio << 8) + tmp / srate;
- dprintk("tda8083: ratio == %08x\n", ratio);
+ dprintk("tda8083: ratio == %08x\n", (unsigned int) ratio);
tda8083_writereg (i2c, 0x05, filter);
tda8083_writereg (i2c, 0x02, (ratio >> 16) & 0xff);
@@ -244,8 +249,7 @@
while (jiffies - start < timeout &&
!(tda8083_readreg(i2c, 0x02) & 0x80))
{
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout (5);
+ dvb_delay(50);
};
}
diff -uNrwB -x '*.o' --new-file linux-2.5.69/drivers/media/dvb/frontends/nxt6000.c linux-2.5.69.patch/drivers/media/dvb/frontends/nxt6000.c
--- linux-2.5.69/drivers/media/dvb/frontends/nxt6000.c 2003-05-06 13:15:32.000000000 +0200
+++ linux-2.5.69.patch/drivers/media/dvb/frontends/nxt6000.c 2003-03-22 12:43:15.000000000 +0100
@@ -25,13 +25,12 @@
*/
-#include <linux/module.h>
+#include <asm/errno.h>
#include <linux/init.h>
-#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
#include <linux/slab.h>
-#include <linux/poll.h>
-#include <asm/io.h>
-#include <linux/i2c.h>
#include "dvb_frontend.h"
#include "nxt6000.h"
diff -uNrwB -x '*.o' --new-file linux-2.5.69/drivers/media/dvb/frontends/stv0299.c linux-2.5.69.patch/drivers/media/dvb/frontends/stv0299.c
--- linux-2.5.69/drivers/media/dvb/frontends/stv0299.c 2003-05-06 13:15:32.000000000 +0200
+++ linux-2.5.69.patch/drivers/media/dvb/frontends/stv0299.c 2003-05-06 10:59:58.000000000 +0200
@@ -35,19 +35,28 @@
*/
+#include <asm/errno.h>
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/string.h>
#include "dvb_frontend.h"
+#include "dvb_functions.h"
+
+#if 0
+#define dprintk(x...) printk(x)
+#else
+#define dprintk(x...)
+#endif
-static int debug = 0;
-#define dprintk if (debug) printk
/* frontend types */
#define UNKNOWN_FRONTEND -1
#define PHILIPS_SU1278SH 0
#define ALPS_BSRU6 1
#define LG_TDQF_S001F 2
+#define PHILIPS_SU1278 3
/* Master Clock = 88 MHz */
#define M_CLK (88000000UL)
@@ -74,11 +83,6 @@
static
u8 init_tab [] = {
- /* clock registers */
- 0x01, 0x15, /* K = 0, DIRCLK = 0, M = 0x15 */
- 0x02, 0x30, /* STDBY = 0, VCO = 0 (ON), SERCLK = 0, P = 0 */
- /* f_VCO = 4MHz * 4 * (M+1) / (K+1) = 352 MHz */
- 0x03, 0x00, /* auxiliary clock not used */
0x04, 0x7d, /* F22FR = 0x7d */
/* F22 = f_VCO / 128 / 0x7d = 22 kHz */
@@ -90,7 +94,7 @@
0x07, 0x00, /* DAC LSB */
/* DiSEqC registers */
- 0x08, 0x40, /* DiSEqC off */
+ 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
0x09, 0x00, /* FIFO */
/* Input/Output configuration register */
@@ -105,34 +109,27 @@
0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
0x10, 0x3f, // AGC2 0x3d
+
0x11, 0x84,
0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on
- 0x13, 0xb6, // alpha_car b:4 a:0 noise est:256ks derot:on
- 0x14, 0x93, // beat carc:0 d:0 e:0xf phase detect algo: 1
+
0x15, 0xc9, // lock detector threshold
- 0x16, 0x1d, /* AGC1 integrator value */
+ 0x16, 0x00,
0x17, 0x00,
- 0x18, 0x14,
- 0x19, 0xf2,
-
- 0x1a, 0x11,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1a, 0x00,
- 0x1b, 0x9c,
- 0x1c, 0x00,
- 0x1d, 0x00,
- 0x1e, 0x0b,
0x1f, 0x50,
0x20, 0x00,
0x21, 0x00,
0x22, 0x00,
0x23, 0x00,
- 0x24, 0xff,
- 0x25, 0xff,
- 0x26, 0xff,
0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
+
0x29, 0x1e, // 1/2 threshold
0x2a, 0x14, // 2/3 threshold
0x2b, 0x0f, // 3/4 threshold
@@ -145,38 +142,6 @@
0x32, 0x19, // viterbi and synchro search
0x33, 0xfc, // rs control
0x34, 0x93, // error control
-
- 0x0b, 0x00,
- 0x27, 0x00,
- 0x2f, 0x00,
- 0x30, 0x00,
- 0x35, 0x00,
- 0x36, 0x00,
- 0x37, 0x00,
- 0x38, 0x00,
- 0x39, 0x00,
- 0x3a, 0x00,
- 0x3b, 0x00,
- 0x3c, 0x00,
- 0x3d, 0x00,
- 0x3e, 0x00,
- 0x3f, 0x00,
- 0x40, 0x00,
- 0x41, 0x00,
- 0x42, 0x00,
- 0x43, 0x00,
- 0x44, 0x00,
- 0x45, 0x00,
- 0x46, 0x00,
- 0x47, 0x00,
- 0x48, 0x00,
- 0x49, 0x00,
- 0x4a, 0x00,
- 0x4b, 0x00,
- 0x4c, 0x00,
- 0x4d, 0x00,
- 0x4e, 0x00,
- 0x4f, 0x00
};
@@ -187,13 +152,11 @@
u8 buf [] = { reg, data };
struct i2c_msg msg = { addr: 0x68, flags: 0, buf: buf, len: 2 };
- dprintk ("%s\n", __FUNCTION__);
-
ret = i2c->xfer (i2c, &msg, 1);
if (ret != 1)
- dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
- __FUNCTION__, reg, data, ret);
+ dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, "
+ "ret == %i)\n", __FUNCTION__, reg, data, ret);
return (ret != 1) ? -1 : 0;
}
@@ -208,8 +171,6 @@
struct i2c_msg msg [] = { { addr: 0x68, flags: 0, buf: b0, len: 1 },
{ addr: 0x68, flags: I2C_M_RD, buf: b1, len: 1 } };
- dprintk ("%s\n", __FUNCTION__);
-
ret = i2c->xfer (i2c, msg, 2);
if (ret != 2)
@@ -226,41 +187,31 @@
struct i2c_msg msg [] = { { addr: 0x68, flags: 0, buf: ®1, len: 1 },
{ addr: 0x68, flags: I2C_M_RD, buf: b, len: len } };
- dprintk ("%s\n", __FUNCTION__);
-
ret = i2c->xfer (i2c, msg, 2);
if (ret != 2)
dprintk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret);
- return ret == 2 ? 0 : -1;
+ return ret == 2 ? 0 : ret;
}
static
-int pll_write (struct dvb_i2c_bus *i2c, u8 data [4], int ftype)
+int pll_write (struct dvb_i2c_bus *i2c, u8 addr, u8 *data, int len)
{
int ret;
u8 rpt1 [] = { 0x05, 0xb5 }; /* enable i2c repeater on stv0299 */
- /* TSA5059 i2c-bus address */
- u8 addr = (ftype == PHILIPS_SU1278SH) ? 0x60 : 0x61;
+ u8 rpt2 [] = { 0x05, 0x35 }; /* disable i2c repeater on stv0299 */
struct i2c_msg msg [] = {{ addr: 0x68, flags: 0, buf: rpt1, len: 2 },
- { addr: addr, flags: 0, buf: data, len: 4 }};
+ { addr: addr, flags: 0, buf: data, len: len },
+ { addr: 0x68, flags: 0, buf: rpt2, len: 2 }};
- dprintk ("%s\n", __FUNCTION__);
+ ret = i2c->xfer (i2c, msg, 3);
- if (ftype == LG_TDQF_S001F || ftype == ALPS_BSRU6) {
- ret = i2c->xfer (i2c, &msg[0], 1);
- ret += i2c->xfer (i2c, &msg[1], 1);
- }
- else {
- ret = i2c->xfer (i2c, msg, 2);
- }
-
- if (ret != 2)
- dprintk("%s: i/o error (ret == %i)\n", __FUNCTION__, ret);
+ if (ret != 3)
+ printk("%s: i/o error (ret == %i)\n", __FUNCTION__, ret);
- return (ret != 2) ? -1 : 0;
+ return (ret != 3) ? ret : 0;
}
@@ -288,7 +239,7 @@
else
buf[3] = 0x00;
- return pll_write (i2c, buf, ftype);
+ return pll_write (i2c, 0x61, buf, sizeof(buf));
}
/**
@@ -298,10 +249,12 @@
static
int tsa5059_set_tv_freq (struct dvb_i2c_bus *i2c, u32 freq, int ftype)
{
+ u8 addr = (ftype == PHILIPS_SU1278SH) ? 0x60 : 0x61;
u32 div = freq / 125;
-
u8 buf[4] = { (div >> 8) & 0x7f, div & 0xff, 0x84 };
+ dprintk ("%s: freq %i, ftype %i\n", __FUNCTION__, freq, ftype);
+
if (ftype == PHILIPS_SU1278SH)
/* activate f_xtal/f_comp signal output */
/* charge pump current C0/C1 = 00 */
@@ -309,16 +262,144 @@
else
buf[3] = freq > 1530000 ? 0xc0 : 0xc4;
- dprintk ("%s\n", __FUNCTION__);
+ return pll_write (i2c, addr, buf, sizeof(buf));
+}
+
- return pll_write (i2c, buf, ftype);
+
+#define ABS(x) ((x) < 0 ? -(x) : (x))
+#define MIN2(a,b) ((a) < (b) ? (a) : (b))
+#define MIN3(a,b,c) MIN2(MIN2(a,b),c)
+
+static
+int tua6100_set_tv_freq (struct dvb_i2c_bus *i2c, u32 freq,
+ int ftype, int srate)
+{
+ u8 reg0 [2] = { 0x00, 0x00 };
+ u8 reg1 [4] = { 0x01, 0x00, 0x00, 0x00 };
+ u8 reg2 [3] = { 0x02, 0x00, 0x00 };
+ int _fband;
+ int first_ZF;
+ int R, A, N, P, M;
+ int err;
+
+ first_ZF = (freq) / 1000;
+
+ if (ABS(MIN2(ABS(first_ZF-1190),ABS(first_ZF-1790))) <
+ ABS(MIN3(ABS(first_ZF-1202),ABS(first_ZF-1542),ABS(first_ZF-1890))))
+ _fband = 2;
+ else
+ _fband = 3;
+
+ if (_fband == 2) {
+ if (((first_ZF >= 950) && (first_ZF < 1350)) ||
+ ((first_ZF >= 1430) && (first_ZF < 1950)))
+ reg0[1] = 0x07;
+ else if (((first_ZF >= 1350) && (first_ZF < 1430)) ||
+ ((first_ZF >= 1950) && (first_ZF < 2150)))
+ reg0[1] = 0x0B;
+ }
+
+ if(_fband == 3) {
+ if (((first_ZF >= 950) && (first_ZF < 1350)) ||
+ ((first_ZF >= 1455) && (first_ZF < 1950)))
+ reg0[1] = 0x07;
+ else if (((first_ZF >= 1350) && (first_ZF < 1420)) ||
+ ((first_ZF >= 1950) && (first_ZF < 2150)))
+ reg0[1] = 0x0B;
+ else if ((first_ZF >= 1420) && (first_ZF < 1455))
+ reg0[1] = 0x0F;
+ }
+
+ if (first_ZF > 1525)
+ reg1[1] |= 0x80;
+ else
+ reg1[1] &= 0x7F;
+
+ if (_fband == 2) {
+ if (first_ZF > 1430) { /* 1430MHZ */
+ reg1[1] &= 0xCF; /* N2 */
+ reg2[1] &= 0xCF; /* R2 */
+ reg2[1] |= 0x10;
+ } else {
+ reg1[1] &= 0xCF; /* N2 */
+ reg1[1] |= 0x20;
+ reg2[1] &= 0xCF; /* R2 */
+ reg2[1] |= 0x10;
+ }
}
+ if (_fband == 3) {
+ if ((first_ZF >= 1455) &&
+ (first_ZF < 1630)) {
+ reg1[1] &= 0xCF; /* N2 */
+ reg1[1] |= 0x20;
+ reg2[1] &= 0xCF; /* R2 */
+ } else {
+ if (first_ZF < 1455) {
+ reg1[1] &= 0xCF; /* N2 */
+ reg1[1] |= 0x20;
+ reg2[1] &= 0xCF; /* R2 */
+ reg2[1] |= 0x10;
+ } else {
+ if (first_ZF >= 1630) {
+ reg1[1] &= 0xCF; /* N2 */
+ reg2[1] &= 0xCF; /* R2 */
+ reg2[1] |= 0x10;
+ }
+ }
+ }
+ }
+
+ /* set ports, enable P0 for symbol rates > 4Ms/s */
+ if (srate >= 4000000)
+ reg1[1] |= 0x0c;
+ else
+ reg1[1] |= 0x04;
+
+ reg2[1] |= 0x0c;
+
+ R = 64;
+ A = 64;
+ P = 64; //32
+
+ M = (freq * R) / 4; /* in Mhz */
+ N = (M - A * 1000) / (P * 1000);
+
+ reg1[1] |= (N >> 9) & 0x03;
+ reg1[2] = (N >> 1) & 0xff;
+ reg1[3] = (N << 7) & 0x80;
+
+ reg2[1] |= (R >> 8) & 0x03;
+ reg2[2] = R & 0xFF; /* R */
+
+ reg1[3] |= A & 0x7f; /* A */
+
+ if (P == 64)
+ reg1[1] |= 0x40; /* Prescaler 64/65 */
+
+ reg0[1] |= 0x03;
+
+ if ((err = pll_write(i2c, 0x60, reg0, sizeof(reg0))))
+ return err;
+
+ if ((err = pll_write(i2c, 0x60, reg1, sizeof(reg1))))
+ return err;
+
+ if ((err = pll_write(i2c, 0x60, reg2, sizeof(reg2))))
+ return err;
+
+ return 0;
+}
+
+
static
-int pll_set_tv_freq (struct dvb_i2c_bus *i2c, u32 freq, int ftype)
+int pll_set_tv_freq (struct dvb_i2c_bus *i2c, u32 freq, int ftype, int srate)
{
if (ftype == LG_TDQF_S001F)
return sl1935_set_tv_freq(i2c, freq, ftype);
+ else if (ftype == PHILIPS_SU1278)
+ return tua6100_set_tv_freq(i2c, freq, ftype, srate);
else
return tsa5059_set_tv_freq(i2c, freq, ftype);
}
@@ -353,12 +434,18 @@
dprintk("stv0299: init chip\n");
+ stv0299_writereg (i2c, 0x01, 0x15);
+ stv0299_writereg (i2c, 0x02, ftype == PHILIPS_SU1278 ? 0x00 : 0x30);
+ stv0299_writereg (i2c, 0x03, 0x00);
+
for (i=0; i<sizeof(init_tab); i+=2)
stv0299_writereg (i2c, init_tab[i], init_tab[i+1]);
/* AGC1 reference register setup */
if (ftype == PHILIPS_SU1278SH)
stv0299_writereg (i2c, 0x0f, 0xd2); /* Iagc = Inverse, m1 = 18 */
+ else if (ftype == PHILIPS_SU1278)
+ stv0299_writereg (i2c, 0x0f, 0x94); /* Iagc = Inverse, m1 = 18 */
else
stv0299_writereg (i2c, 0x0f, 0x52); /* Iagc = Normal, m1 = 18 */
@@ -372,9 +459,12 @@
dprintk ("%s\n", __FUNCTION__);
if ((stv0299_readreg (i2c, 0x1b) & 0x98) != 0x98) {
+ dvb_delay(30);
+ if ((stv0299_readreg (i2c, 0x1b) & 0x98) != 0x98) {
u8 val = stv0299_readreg (i2c, 0x0c);
return stv0299_writereg (i2c, 0x0c, val ^ 0x01);
}
+ }
return 0;
}
@@ -435,8 +525,7 @@
dprintk ("%s: timeout!!\n", __FUNCTION__);
return -ETIMEDOUT;
}
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout (1);
+ dvb_delay(10);
};
return 0;
@@ -455,8 +544,7 @@
dprintk ("%s: timeout!!\n", __FUNCTION__);
return -ETIMEDOUT;
}
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout (1);
+ dvb_delay(10);
};
return 0;
@@ -528,7 +616,9 @@
{
u8 val;
- dprintk ("%s\n", __FUNCTION__);
+ dprintk("%s: %s\n", __FUNCTION__,
+ tone == SEC_TONE_ON ? "SEC_TONE_ON" :
+ tone == SEC_TONE_OFF ? "SEC_TONE_OFF" : "??");
if (stv0299_wait_diseqc_idle (i2c, 100) < 0)
return -ETIMEDOUT;
@@ -549,19 +639,25 @@
static
int stv0299_set_voltage (struct dvb_i2c_bus *i2c, fe_sec_voltage_t voltage)
{
- u8 val;
+ u8 reg0x0c;
- dprintk ("%s\n", __FUNCTION__);
+ dprintk("%s: %s\n", __FUNCTION__,
+ voltage == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" :
+ voltage == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??");
- val = stv0299_readreg (i2c, 0x0c);
- val &= 0x0f;
- val |= 0x40; /* LNB power on */
+ reg0x0c = stv0299_readreg (i2c, 0x0c);
+
+ /**
+ * H/V switching over OP0, OP1 is LNB power on
+ */
+ reg0x0c &= 0x0f;
+ reg0x0c |= 0x40; /* LNB power on */
switch (voltage) {
case SEC_VOLTAGE_13:
- return stv0299_writereg (i2c, 0x0c, val);
+ return stv0299_writereg (i2c, 0x0c, reg0x0c);
case SEC_VOLTAGE_18:
- return stv0299_writereg (i2c, 0x0c, val | 0x10);
+ return stv0299_writereg (i2c, 0x0c, reg0x0c | 0x10);
default:
return -EINVAL;
};
@@ -645,8 +741,6 @@
int tuner_type = (int)fe->data;
struct dvb_i2c_bus *i2c = fe->i2c;
- dprintk ("%s\n", __FUNCTION__);
-
switch (cmd) {
case FE_GET_INFO:
memcpy (arg, &uni0299_info, sizeof(struct dvb_frontend_info));
@@ -692,7 +786,7 @@
dprintk ("AGC2I: 0x%02x%02x, signal=0x%04x\n",
stv0299_readreg (i2c, 0x18),
- stv0299_readreg (i2c, 0x19), signal);
+ stv0299_readreg (i2c, 0x19), (int) signal);
signal = signal * 5 / 4;
*((u16*) arg) = (signal > 0xffff) ? 0xffff :
@@ -716,15 +810,16 @@
{
struct dvb_frontend_parameters *p = arg;
- pll_set_tv_freq (i2c, p->frequency, tuner_type);
+ pll_set_tv_freq (i2c, p->frequency, tuner_type,
+ p->u.qpsk.symbol_rate);
+
stv0299_set_FEC (i2c, p->u.qpsk.fec_inner);
stv0299_set_symbolrate (i2c, p->u.qpsk.symbol_rate);
- stv0299_check_inversion (i2c);
- /* pll_set_tv_freq (i2c, p->frequency, tuner_type); */
stv0299_writereg (i2c, 0x22, 0x00);
stv0299_writereg (i2c, 0x23, 0x00);
stv0299_readreg (i2c, 0x23);
stv0299_writereg (i2c, 0x12, 0xb9);
+ stv0299_check_inversion (i2c);
/* printk ("%s: tsa5059 status: %x\n", __FUNCTION__, tsa5059_read_status(i2c)); */
break;
@@ -752,19 +847,13 @@
case FE_SLEEP:
stv0299_writereg (i2c, 0x0c, 0x00); /* LNB power off! */
+ stv0299_writereg (i2c, 0x08, 0x00); /* LNB power off! */
stv0299_writereg (i2c, 0x02, 0x80);
break;
case FE_INIT:
return stv0299_init (i2c, tuner_type);
- case FE_RESET:
- stv0299_writereg (i2c, 0x22, 0x00);
- stv0299_writereg (i2c, 0x23, 0x00);
- stv0299_readreg (i2c, 0x23);
- stv0299_writereg (i2c, 0x12, 0xb9);
- break;
-
case FE_DISEQC_SEND_MASTER_CMD:
return stv0299_send_diseqc_msg (i2c, arg);
@@ -787,35 +876,53 @@
static
int probe_tuner (struct dvb_i2c_bus *i2c)
{
- int type;
-
/* read the status register of TSA5059 */
u8 rpt[] = { 0x05, 0xb5 };
u8 stat [] = { 0 };
+ int ret;
struct i2c_msg msg1 [] = {{ addr: 0x68, flags: 0, buf: rpt, len: 2 },
{ addr: 0x60, flags: I2C_M_RD, buf: stat, len: 1 }};
struct i2c_msg msg2 [] = {{ addr: 0x68, flags: 0, buf: rpt, len: 2 },
{ addr: 0x61, flags: I2C_M_RD, buf: stat, len: 1 }};
+ struct i2c_msg msg3 [] = {{ addr: 0x68, flags: 0, buf: rpt, len: 2 },
+ { addr: 0x60, flags: 0, buf: stat, len: 1 }};
+
+ stv0299_writereg (i2c, 0x01, 0x15);
+ stv0299_writereg (i2c, 0x02, 0x30);
+ stv0299_writereg (i2c, 0x03, 0x00);
- if (i2c->xfer(i2c, msg1, 2) == 2) {
- type = PHILIPS_SU1278SH;
+ if ((ret = i2c->xfer(i2c, msg1, 2)) == 2) {
printk ("%s: setup for tuner SU1278/SH\n", __FILE__);
- } else if (i2c->xfer(i2c, msg2, 2) == 2) {
-if (0) { // if ((stat[0] & 0x3f) == 0) {
- type = LG_TDQF_S001F;
- printk ("%s: setup for tuner TDQF-S001F\n", __FILE__);
- }
- else {
- type = ALPS_BSRU6;
- printk ("%s: setup for tuner BSRU6, TDQB-S00x\n", __FILE__);
+ return PHILIPS_SU1278SH;
}
+
+ if ((ret = i2c->xfer(i2c, msg2, 2)) == 2) {
+ //if ((stat[0] & 0x3f) == 0) {
+ if (0) {
+ printk ("%s: setup for tuner TDQF-S001F\n", __FILE__);
+ return LG_TDQF_S001F;
} else {
- type = UNKNOWN_FRONTEND;
- printk ("%s: unknown PLL synthesizer, "
- "please report to <linuxdvb@linuxtv.org>!!\n",
+ printk ("%s: setup for tuner BSRU6, TDQB-S00x\n",
__FILE__);
+ return ALPS_BSRU6;
+ }
}
- return type;
+
+ /**
+ * setup i2c timing for SU1278...
+ */
+ stv0299_writereg (i2c, 0x02, 0x00);
+
+ if ((ret = i2c->xfer(i2c, msg3, 2)) == 2) {
+ printk ("%s: setup for tuner Philips SU1278\n", __FILE__);
+ return PHILIPS_SU1278;
+ }
+
+ printk ("%s: unknown PLL synthesizer (ret == %i), "
+ "please report to <linuxdvb@linuxtv.org>!!\n",
+ __FILE__, ret);
+
+ return UNKNOWN_FRONTEND;
}
@@ -825,7 +932,7 @@
int tuner_type;
u8 id = stv0299_readreg (i2c, 0x00);
- dprintk ("%s\n", __FUNCTION__);
+ dprintk ("%s: id == 0x%02x\n", __FUNCTION__, id);
/* register 0x00 contains 0xa1 for STV0299 and STV0299B */
/* register 0x00 might contain 0x80 when returning from standby */
@@ -855,8 +961,7 @@
int __init init_uni0299 (void)
{
dprintk ("%s\n", __FUNCTION__);
-
- return dvb_register_i2c_device (THIS_MODULE, uni0299_attach, uni0299_detach);
+ return dvb_register_i2c_device (NULL, uni0299_attach, uni0299_detach);
}
@@ -871,9 +975,6 @@
module_init (init_uni0299);
module_exit (exit_uni0299);
-MODULE_PARM(debug,"i");
-MODULE_PARM_DESC(debug, "enable verbose debug messages");
-
MODULE_DESCRIPTION("Universal STV0299/TSA5059/SL1935 DVB Frontend driver");
MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Peter Schildmann, Felix Domke, Andreas Oberritter");
MODULE_LICENSE("GPL");
diff -uNrwB -x '*.o' --new-file linux-2.5.69/drivers/media/dvb/frontends/ves1820.c linux-2.5.69.patch/drivers/media/dvb/frontends/ves1820.c
--- linux-2.5.69/drivers/media/dvb/frontends/ves1820.c 2003-05-06 13:15:32.000000000 +0200
+++ linux-2.5.69.patch/drivers/media/dvb/frontends/ves1820.c 2003-04-30 12:02:46.000000000 +0200
@@ -19,11 +19,15 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <asm/errno.h>
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
+#include "dvb_functions.h"
#if 0
@@ -63,13 +67,9 @@
#define GET_TUNER(data) ((u8) (((int) data >> 16) & 0xff))
#define GET_DEMOD_ADDR(data) ((u8) (((int) data >> 24) & 0xff))
+#define XIN 57840000UL
+#define FIN (XIN >> 4)
-static inline
-void ddelay (int ms)
-{
- current->state=TASK_INTERRUPTIBLE;
- schedule_timeout((HZ*ms)/1000);
-}
static
@@ -79,8 +79,8 @@
.frequency_stepsize = 62500,
.frequency_min = 51000000,
.frequency_max = 858000000,
- .symbol_rate_min = (57840000/2)/64, /* SACLK/64 == (XIN/2)/64 */
- .symbol_rate_max = (57840000/2)/4, /* SACLK/4 */
+ .symbol_rate_min = (XIN/2)/64, /* SACLK/64 == (XIN/2)/64 */
+ .symbol_rate_max = (XIN/2)/4, /* SACLK/4 */
#if 0
frequency_tolerance: ???,
symbol_rate_tolerance: ???, /* ppm */ /* == 8% (spec p. 5) */
@@ -123,7 +123,7 @@
"(reg == 0x%02x, val == 0x%02x, ret == %i)\n",
__FUNCTION__, reg, data, ret);
- mdelay(10);
+ dvb_delay(10);
return (ret != 1) ? -EREMOTEIO : 0;
}
@@ -209,7 +209,7 @@
* check lock and toggle inversion bit if required...
*/
if (!(ves1820_readreg (fe, 0x11) & 0x08)) {
- ddelay(1);
+ dvb_delay(10);
if (!(ves1820_readreg (fe, 0x11) & 0x08)) {
reg0 ^= 0x20;
ves1820_writereg (fe, 0x00, reg0 & 0xfe);
@@ -250,9 +250,6 @@
u16 NDEC = 0;
u32 tmp, ratio;
-#define XIN 57840000UL
-#define FIN (XIN >> 4)
-
if (symbolrate > XIN/2)
symbolrate = XIN/2;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed May 07 2003 - 22:00:27 EST