Linux version 2.4.21-rc1-ac4 (root@eva01) (gcc version 3.2.3) #4 Thu May 8 19:21:58 PDT 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 262128 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 32752 pages. ACPI: RSDP (v000 Nvidia ) @ 0x000f7600 ACPI: RSDT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff74c0 ACPI: DSDT (v001 NVIDIA AWRDACPI 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 Pentium(tm) Pro APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) ACPI: INT_SRC_OVR (bus[0] irq[0xe] global_irq[0xe] polarity[0x1] trigger[0x1]) ACPI: INT_SRC_OVR (bus[0] irq[0xf] global_irq[0xf] polarity[0x1] trigger[0x1]) Using ACPI (MADT) for SMP configuration information Kernel command line: root=/dev/sdb1 ro pci=noacpi noapic Initializing CPU#0 Detected 2088.094 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 4168.08 BogoMIPS Memory: 1033216k/1048512k available (1512k kernel code, 14908k reserved, 591k data, 156k init, 131008k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 CPU: AMD Athlon(tm) XP 2800+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2088.0634 MHz. ..... host bus clock speed is 334.0900 MHz. cpu: 0, clocks: 3340900, slice: 1670450 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030424 PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=3 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB1._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [APC1] (IRQs *16) ACPI: PCI Interrupt Link [APC2] (IRQs *17) ACPI: PCI Interrupt Link [APC3] (IRQs *18) ACPI: PCI Interrupt Link [APC4] (IRQs *19) ACPI: PCI Interrupt Link [APC5] (IRQs 16, disabled) ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCS] (IRQs 23, disabled) ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22, disabled) PCI: Probing PCI hardware PCI: Using IRQ router default [10de/01e0] at 00:00.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket IA-32 Microcode Update Driver: v1.11 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) apm: overridden by ACPI. BIOS EDD facility v0.09 2003-Jan-22, 3 devices found Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: IDE controller at PCI slot 00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD_IDE: PCI device 10de:0065 (nVidia Corporation) (rev a2) UDMA100 controller on pci00:09.0 ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA SiI3112 Serial ATA: IDE controller at PCI slot 01:0b.0 SiI3112 Serial ATA: chipset revision 2 SiI3112 Serial ATA: not 100% native mode: will probe irqs later ide2: MMIO-DMA at 0xf8808000-0xf8808007, BIOS settings: hde:pio, hdf:pio ide3: MMIO-DMA at 0xf8808008-0xf880800f, BIOS settings: hdg:pio, hdh:pio hda: ST39140A, ATA DISK drive blk: queue c036fb20, I/O limit 4095Mb (mask 0xffffffff) hdc: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hdc: set_drive_speed_status: error=0x04 ide1: Drive 0 didn't accept speed setting. Oh, well. hde: no response (status = 0xfe) hdg: no response (status = 0xfe) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: 17803440 sectors (9115 MB) w/448KiB Cache, CHS=1108/255/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 > hdc:end_request: I/O error, dev 16:00 (hdc), sector 0 end_request: I/O error, dev 16:00 (hdc), sector 2 end_request: I/O error, dev 16:00 (hdc), sector 4 end_request: I/O error, dev 16:00 (hdc), sector 6 end_request: I/O error, dev 16:00 (hdc), sector 0 end_request: I/O error, dev 16:00 (hdc), sector 2 end_request: I/O error, dev 16:00 (hdc), sector 4 end_request: I/O error, dev 16:00 (hdc), sector 6 unable to read partition table SCSI subsystem driver Revision: 1.00 scsi0 : AdvanSys SCSI 3.3G: PCI Ultra: IO 0xAC00-0xAC0F, IRQ 0xA scsi1 : AdvanSys SCSI 3.3G: PCI Ultra2-Wide: PCIMEM 0xF881B000-0xF881B0FF, IRQ 0xB Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.07 Type: CD-ROM ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST39103LW Rev: 0002 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST39103LW Rev: 0002 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0 SCSI device sda: 17783240 512-byte hdwr sectors (9105 MB) /dev/scsi/host1/bus0/target0/lun0: p1 p2 < p5 > SCSI device sdb: 17783240 512-byte hdwr sectors (9105 MB) /dev/scsi/host1/bus0/target1/lun0: p1 p2 < p5 p6 p7 > NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 156k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Adding Swap: 136512k swap-space (priority -1) Adding Swap: 136512k swap-space (priority -2) EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,17), internal journal eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:90:27:84:41:5A, IRQ 10. Board assembly 729757-003, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. Real Time Clock Driver v1.10e PCI: Setting latency timer of device 00:06.0 to 64 intel8x0: clocking to 47422 devfs_register(unknown): could not append to parent, err: -17 devfs_register(unknown): could not append to parent, err: -17 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 941M agpgart: unsupported bridge agpgart: no supported devices found. 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4349 Thu Mar 27 19:00:02 PST 2003 spurious 8259A interrupt: IRQ7. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 941M agpgart: unsupported bridge agpgart: no supported devices found. 0: NVRM: AGPGART: unable to retrieve symbol table mice: PS/2 mouse device common for all mice usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 19:33:14 May 8 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: deregistering driver usbdevfs usb.c: deregistering driver hub