On Sat, 2003-05-17 at 12:18, Andrew Morton wrote:
> Bummer. Vital info is chopped off the top of the oops output.
Well, I'm idiot. Please, disregard my previos mail. This contains the
full oops, config and patch:
--- I've been working on this a little this morning and these are the new conclusions I've drawn:1. Definitively, the oops is being caused by the YMFPCI driver. I have built a mini-kernel by squashing the config to a minimum (disabled modules, preemptive, removed USB, IDE, AGP, Networking, CardBus, and nearly everything possible) and the kernel still faults.
2. Compiling the kernel with frame pointers causes a panic during boot instead of an oops. Thus, I've changed my config to use frame pointers. I don't know if this will make debugging a little harder or not, but I think it's interesting to use them as the call trace is a little different this time.
Attached to this message are the following files:
"ymfpci2.patch" which replaces the "YMPFCI" string with "1MFPCI", "2MFPCI" and so on. This patch should be applied against a pristine, clean 2.5.69-mm6 kernel tree.
"config" contains the configuration I used to build the kernel. Nearly everything has been left off: no swapping, no modules, no preemptive, no ACPI, no APM, no power management, no IDE, no USB, no AGP, no networking, etc. I made this to keep the number of additional drivers to a minimum and being able to concentrate on the faulting driver.
"oops" contains the kernel oops when booting 2.5.69-mm6 + ymfpci2.patch using the above config file.
Hope this can make things easier for you, guys, cause this thing is getting greater than me. ---
# # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y
# # Code maturity level options # # CONFIG_EXPERIMENTAL is not set
# # General setup # # CONFIG_SWAP is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=14
# # Loadable module support # # CONFIG_MODULES is not set CONFIG_FUTEX=y CONFIG_EPOLL=y
# # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_X86_UP_APIC is not set CONFIG_X86_TSC=y # CONFIG_X86_MCE is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_025GB is not set # CONFIG_05GB is not set CONFIG_1GB=y # CONFIG_2GB is not set # CONFIG_3GB is not set # CONFIG_MATH_EMULATION is not set # CONFIG_MTRR is not set
# # Power management options (ACPI, APM) # # CONFIG_PM is not set
# # ACPI Support # # CONFIG_ACPI is not set
# # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set
# # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # CONFIG_HOTPLUG is not set
# # Executable file formats # CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set
# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set
# # Parallel port support # # CONFIG_PARPORT is not set
# # Plug and Play support # # CONFIG_PNP is not set
# # Block devices # # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_LBD is not set
# # ATA/ATAPI/MFM/RLL device support # # CONFIG_IDE is not set
# # SCSI device support # # CONFIG_SCSI is not set
# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set
# # Fusion MPT device support #
# # I2O device support # # CONFIG_I2O is not set
# # Networking support # # CONFIG_NET is not set
# # Amateur Radio support # # CONFIG_HAMRADIO is not set
# # ISDN subsystem #
# # Telephony Support # # CONFIG_PHONE is not set
# # Input device support # CONFIG_INPUT=y
# # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set
# # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set
# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set
# # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set
# # Serial drivers #
# # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256
# # I2C support # # CONFIG_I2C is not set
# # I2C Hardware Sensors Mainboard support #
# # I2C Hardware Sensors Chip support # # CONFIG_I2C_SENSOR is not set
# # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_QIC02_TAPE is not set
# # IPMI # # CONFIG_IPMI_HANDLER is not set
# # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set
# # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set
# # Multimedia devices # # CONFIG_VIDEO_DEV is not set
# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set
# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set
# # DOS/FAT/NT Filesystems # # CONFIG_FAT_FS is not set # CONFIG_NTFS_FS is not set
# # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_DEVPTS_FS=y # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y CONFIG_RAMFS=y
# # Miscellaneous filesystems # # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set
# # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y
# # Graphics support # # CONFIG_FB is not set # CONFIG_VIDEO_SELECT is not set
# # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y
# # Sound # CONFIG_SOUND=y
# # Advanced Linux Sound Architecture # CONFIG_SND=y # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_OSSEMUL is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set
# # Generic devices # # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set
# # PCI devices # # CONFIG_SND_ALI5451 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set CONFIG_SND_YMFPCI=y # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set
# # Open Sound System # # CONFIG_SOUND_PRIME is not set
# # USB support # # CONFIG_USB is not set
# # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set CONFIG_KALLSYMS=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set CONFIG_DEBUG_INFO=y CONFIG_FRAME_POINTER=y
# # Security options # # CONFIG_SECURITY is not set
# # Cryptographic options # # CONFIG_CRYPTO is not set
# # Library routines # # CONFIG_CRC32 is not set CONFIG_X86_BIOS_REBOOT=y
Unable to handle kernel paging request at virtual address fceec0d7 printing eip: c016954f *pde = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[<c016954f>] Not tainted VLI EFLAGS: 00010246 EIP is at sys_create_link+0xcf/0x130 eax: cffedae0 ebx: ffffffff ecx: ffffffff edx: fceec0cf esi: c01d128d edi: cff5e470 ebp: c12ebf10 esp: c12ebee4 ds: 007b es: 007b ss: 0068 Process swapper (pid: 1, threadinfo=c12ea000 task=c12e9880) Stack: cff5e470 cffedae0 00000021 c01e8600 c13d0000 cffedae0 00000021 fceec0cf c01e8630 cff5e44c 00000000 c12ebf28 c0193932 c01e8600 cff5e470 cff5e470 c01e85e8 c12ebf44 c01939ba cff5e44c c01e85e8 cff5e454 c01e1f80 c01e85e8 Call Trace: [<c0193932>] device_bind_driver+0x42/0x50 [<c01939ba>] bus_match+0x7a/0x80 [<c0193aad>] driver_attach+0x5d/0x70 [<c0193d56>] bus_add_driver+0xa6/0xc0 [<c01941b1>] driver_register+0x31/0x40 [<c01a74ca>] snd_ctl_register_ioctl+0x1a/0x70 [<c017be45>] pci_register_driver+0x45/0x60 [<c0214f45>] alsa_card_ymfpci_init+0x15/0x50 [<c020679b>] do_initcalls+0x2b/0xa0 [<c01231b2>] init_workqueues+0x12/0x30 [<c0105088>] init+0x28/0x150 [<c0105060>] init+0x0/0x150 [<c01073dd>] kernel_thread_helper+0x5/0x18
Code: ac aa 84 c0 75 fa 4b 83 c1 03 83 fb ff 75 ed 8b 45 ec 8b 55 e8 8b 7d 0c 89 44 24 08 89 54 24 04 89 3c 24 e8 d4 fe ff ff 8b 55 f0 <8b> 42 08 8d 48 6c ff 48 6c 78 68 8b 45 10 89 14 24 89 44 24 04 <0>Kernel panic: Attempted to kill init!
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri May 23 2003 - 22:00:27 EST