Re: 2.5.70-mm2

From: Boszormenyi Zoltan (zboszor@freemail.hu)
Date: Fri May 30 2003 - 05:41:27 EST


Boszormenyi Zoltan wrote:

OK, compiled as built-in, not too many problems left.


One problem is found: I enabled ACPI and disabled APM.
On poweroff, I got an oops after every service stopped.
I was able to read some lines vaguely, it wrote something about
"acpi_poweroff called", "IRQ#20 disabled", but I was not able to
write the oops down because the machine switched itself off.

Here are some info I was able to gather:
ASUS P2B-D with 2 PIII/500

# lspci -s 00:04.3
00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
[root@catv-50622120 proc]# lspci -s 00:04.3 -vvv
00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
# cat interrupts
CPU0 CPU1
0: 23121 462231 IO-APIC-edge timer
1: 2493 11 IO-APIC-edge i8042
2: 0 0 XT-PIC cascade
8: 1 0 IO-APIC-edge rtc
12: 9135 756 IO-APIC-edge i8042
14: 14296 2371 IO-APIC-edge ide0
15: 4055 1804 IO-APIC-edge ide1
16: 1 90 IO-APIC-level eth1
19: 373 4 IO-APIC-level eth0
20: 0 0 IO-APIC-level acpi
NMI: 0 0
LOC: 485147 485151
ERR: 0
MIS: 0

Best regards,
Zoltán Böszörményi


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/