2.4.21 crashes hard running cdrecord in X.
I just compiled installed 2.4.21, and when I try to burn a cd in X,
everything locks up hard. I've enabled kernel debugging and set up a
serial console to try to capture anything I can, but I don't even get a
panic or an oops message. The following line is the last dying gasp
from syslogd:
Jun 15 16:21:54 spike kernel: scsi : aborting command due to timeout :
pid 569,
scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00
After that, everything is locked up hard. Even the SysRq keys won't
work. The command I was running that particular time was
cdrecord dev=0,0,0 blank=fast
This only seems to happen when I'm running in X. I can use cdrecord to
burn cds all day when X is not running. I haven't gotten any
finer-grained with it than that; I don't know if it's X itself, the
window manager, the desktop, nvidia's drivers, or any other bits that
are interacting badly with cdrecord.
My system is mostly Red Hat 8. I updated the cdrecord rpm to the very
latest I could get when this started happening, cdrecord-2.0-10, but
that made no difference. Here is the output from
/usr/src/linux/scripts/ver_linux:
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux spike.sunnydale 2.4.21 #6 Sun Jun 15 15:35:26 PDT 2003 i686 i686
i386 GNU/Linux
Gnu C 3.2
Gnu make 3.79.1
util-linux 2.11r
mount 2.11r
modutils 2.4.18
e2fsprogs 1.27
PPP 2.4.1
isdn4k-utils 3.1pre4
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 2.0.7
Net-tools 1.60
Kbd 1.06
Sh-utils 2.0.12
Modules Loaded sr_mod awe_wave sb sb_lib uart401 sound nvidia
parport_pc lp parport nfsd lockd sunrpc autofs4 tulip iptable_filter
ip_tables ide-scsi scsi_mod vfat fat mousedev keybdev hid input usb-uhci
usbcore
By the way, cdrecord --scanbus works fine whether in text or X mode,
here's the output from it:
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
cdrecord: Warning: using inofficial libscg transport code version
(schily - Red
Hat-scsi-linux-sg.c-1.75-RH '@(#)scsi-linux-sg.c 1.75 02/10/21
Copyright
1997 J. Schilling').
scsibus0:
0,0,0 0) 'SONY ' 'CD-RW CRX160E ' '1.0e' Removable
CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
More stuff about this box follows. Any help would be greatly
appreciated!!!
lspci -vvv
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 02)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: e6000000-e7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
(prog-if 80
[Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 14
Region 4: I/O ports at c000 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:0e.0 RAID bus controller: CMD Technology Inc PCI0649 (rev 01)
Subsystem: CMD Technology Inc PCI0649
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c400 [size=8]
Region 1: I/O ports at c800 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at d000 [size=4]
Region 4: I/O ports at d400 [size=16]
Expansion ROM at e8000000 [disabled] [size=512K]
Capabilities: <available only to root>
00:12.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet
10/100 model NC100 (rev 11)
Subsystem: Linksys: Unknown device 0574
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min, 63750ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at ea000000 (32-bit, non-prefetchable)
[size=1K]
Expansion ROM at e9000000 [disabled] [size=128K]
Capabilities: <available only to root>
01:00.0 VGA compatible controller: nVidia Corporation NV5 [Riva TnT2
Ultra] (rev 11) (prog-if 00 [VGA])
Subsystem: Creative Labs 3D Blaster RIVA TNT2 Ultra
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e4000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: Memory at e6000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at e5000000 [disabled] [size=64K]
Capabilities: <available only to root>
cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SONY Model: CD-RW CRX160E Rev: 1.0e
Type: CD-ROM ANSI SCSI revision: 02
cat /proc/scsi/sg/*
0
dev_max(currently)=7 max_active_device=1 (origin 1)
scsi_dma_free_sectors=96 sg_pool_secs_aval=320 def_reserved_size=32768
32768
host chan id lun type opens qdepth busy online
0 0 0 0 5 0 5 0 1
SONY CD-RW CRX160E 1.0e
uid busy cpl scatg isa emul
0 0 5 256 0 1
SCSI host adapter emulation for IDE ATAPI devices
30125 Version: 3.1.25 (20030529)
cat /proc/scsi/ide-scsi/*
SCSI host adapter emulation for IDE ATAPI devices
-- Per Nystrom <pnystrom@netmagic.net>- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jun 15 2003 - 22:00:43 EST