LILO 22.3.2 boot: Loading Linux_2.4.21................ BIOS data check successful Linux version 2.4.21 (root@telekon.davesnet) (gcc version 3.2 (Mandrake Linux 9. 0 3.2-1mdk)) #50 Thu Jun 19 07:51:48 BST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff00 BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=Linux_2.4.21 ro root=303 devfs=mount hdd=ide-scs i console=tty0 console=ttyS0 ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 1498.113 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2988.44 BogoMIPS Memory: 256844k/262080k available (1266k kernel code, 4848k reserved, 462k data, 80k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K CPU: Intel(R) Pentium(R) 4 CPU 1.50GHz stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb190, last bus=2 PCI: Using configuration PCI: Probing PCI hardware Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) w abled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize PPP generic driver version 2.4.2 PPP Deflate Compression module registered Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 203M Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with i hda: ST340810A, ATA DISK drive hdc: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive hdd: CW038D ATAPI CD-R/RW, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63 hdc: attached ide-cdrom driver. hdc: ATAPI 48X DVD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.12 hdd: attached ide-scsi driver. Partition check: /dev/ide/host0/bus0/target0/ SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: CyberDrv Model: CW038D CD-R/RW Rev: 110C Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 80k freed INIT: version 2.83 booting Setting default font (lat0-16): [ OK ] Booting, please wait... Welcome to Mandrake Linux 9.0 Press 'I' to enter interactive startup. Running DevFs daemon [ OK ] Configuring kernel parameters: [ OK ] Setting clock (utc): Thu Jun 19 16:59:51 BST 2003 [ OK ] Setting hostname telekon.davesnet: [ OK ] Initializing USB controller (usb-uhci): [ OK ] Mount USB filesystem [ OK ] Loading USB printer [ OK ] Checking root filesystem /dev/hda3: clean, 224767/2101152 files, 1419679/4194973 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Activating swap partitions: [ OK ] Finding module dependencies: [ OK ] Checking filesystems /dev/hda4: clean, 42024/3478784 files, 1412964/3476064 blocks [ OK ] Mounting local filesystems: [ OK ] Checking loopback filesystems[ OK ] Mounting loopback filesystems: [ OK ] Loading keymap: uk [ OK ] Loading compose keys: compose.latin9.inc [ OK ] The BackSpace key sends: ^?[ OK ] Turning on user and group quotas for local filesystems: [ OK ] Enabling swap space: [ OK ] Building Window Manager Sessions [ OK ] modprobe: modprobe: Can't locate module eth5 modprobe: modprobe: Can't locate modprobe: modprobe: Can't locate module eth7 INIT: Entering runlevel: 3 Entering non-interactive startup Starting iptables: [ OK ] Setting network parameters: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] Starting portmapper: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting partmon: [ OK ] Starting console mouse services: [ OK ] Loading sound module (snd-card-0) modprobe: Can't locate module [FAILED] Initializing random number generator: [ OK ] Starting X Font Server: [ OK ] Mounting other filesystems: [ OK ] Starting atd: [ OK ] Starting saslauthd[ OK ] Starting sshd: [ OK ] Starting xinetd: [ OK ] Starting cups: [ OK ] Starting automount:[ OK ] Loading keymap: uk [ OK ] Loading compose keys: compose.latin9.inc [ OK ] The BackSpace key sends: ^?[ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting numlock: [ OK ] Checking internet connections to start Starting crond: [ OK ] Starting squid: [ OK ] Starting Webmin [ OK ] Starting Fetchmail services: [ OK ] Starting SMB services: [ OK ] Starting NMB services: [ OK ] Starting lisa: [ OK ] Starting kheader: [ OK ] Starting cups: [ OK ] Running devfsd actions: [ OK ] Running Linuxconf hooks: [ OK ] alsactl: load_state:1121: No soundcards found... Mandrake Linux release 9.0 (dolphin) for i586 Kernel 2.4.21 on an i686 / ttyS0 telekon.davesnet login: root Password: Login incorrect login: Unable to handle kernel NULL pointer dereference at virtual address 00000 000 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<00000000>] Not tainted EFLAGS: 00010202 eax: c02ecab4 ebx: c02ecca0 ecx: 00000000 edx: 00000170 esi: cf6f0d60 edi: c12cee80 ebp: cf223a8c esp: cf223a64 ds: 0018 es: 0018 ss: 0018 Process mount (pid: 2255, stackpage=cf223000) Stack: c01d8054 c02ecca0 cf6f0d60 0000000c 00000000 000001f4 c12cee80 c02ecca0 00000040 00000000 cf223ac0 c01c21e2 c02ecca0 cf6f0d 000001f4 c02ecca0 00000000 00000002 c02ecca0 cff3f260 cf237ea0 cf223ae4 Call Trace: [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [IPT INPUT packet died: IN=eth1 OUT= MAC= SRC=80.5.242.41 DST=255.255.255.255 LEN=137 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=117 IPT INPUT packet died: IN=eth1 OUT= MAC= SRC=80.5.242.41 DST=255.255.255.255 LEN =149 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=129 Login timed out Mandrake Linux release 9.0 (dolphin) for i586 Kernel 2.4.21 on an i686 / ttyS0 telekon.davesnet login: scsi : aborting command due to timeout : pid 6, scsi0, c hannel 0, id 0, lun 0 0x43 00 00 00 00 00 00 00 0c 40 Kernel 2.4.21 hdd: irq timeout: status=0xd0 { Busy } Unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: 00000000 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<00000000>] Not tainted EFLAGS: 00010203 eax: c02ecab4 ebx: c02ecca0 ecx: 00000000 edx: 00000170 esi: cf6f0d60 edi: c12cee80 ebp: c02b3e94 esp: c02b3e6c ds: 0018 es: 0018 ss: 0018 Process swapper (pid: 0, stackpage=c02b3000) Stack: c01d8054 c02ecca0 cf6f0d60 0000000c 00000000 000001f4 c12cee80 c02ecca0 00000040 00000000 c02b3ec8 c01c21e2 c02ecca0 cf6f0d60 00000000 00000088 000001f4 c02b3eec 00000000 00000018 c02ecca0 cff3f260 cf237ea0 c02b3eec Call Trace: [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] Code: Bad EIP value. <0>Kernel panic: Aiee, killing interrupt handler! In interrupt handler - not syncing