Re: [PATCH] More PCI fixes for 2.5.73

From: Greg KH (greg@kroah.com)
Date: Wed Jun 25 2003 - 19:48:15 EST


ChangeSet 1.1429.2.7, 2003/06/25 17:16:12-07:00, greg@kroah.com

[PATCH] IBM PCI Hotplug: fixes found by sparse

 drivers/pci/hotplug/ibmphp_hpc.c | 61 +++++++++++++++++++--------------------
 drivers/pci/hotplug/ibmphp_res.c | 4 +-
 2 files changed, 32 insertions(+), 33 deletions(-)

diff -Nru a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c
--- a/drivers/pci/hotplug/ibmphp_hpc.c Wed Jun 25 17:37:49 2003
+++ b/drivers/pci/hotplug/ibmphp_hpc.c Wed Jun 25 17:37:49 2003
@@ -152,11 +152,11 @@
         u8 status;
         int i;
         void *wpg_addr; // base addr + offset
- ulong wpg_data, // data to/from WPG LOHI format
- ultemp, data; // actual data HILO format
+ unsigned long wpg_data; // data to/from WPG LOHI format
+ unsigned long ultemp;
+ unsigned long data; // actual data HILO format
 
-
- debug_polling ("%s - Entry WPGBbar[%lx] index[%x] \n", __FUNCTION__, (ulong) WPGBbar, index);
+ debug_polling ("%s - Entry WPGBbar[%p] index[%x] \n", __FUNCTION__, WPGBbar, index);
 
         //--------------------------------------------------------------------
         // READ - step 1
@@ -165,17 +165,17 @@
         if (ctlr_ptr->ctlr_type == 0x02) {
                 data = WPG_READATADDR_MASK;
                 // fill in I2C address
- ultemp = (ulong) ctlr_ptr->u.wpeg_ctlr.i2c_addr;
+ ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
                 ultemp = ultemp >> 1;
                 data |= (ultemp << 8);
 
                 // fill in index
- data |= (ulong) index;
+ data |= (unsigned long)index;
         } else if (ctlr_ptr->ctlr_type == 0x04) {
                 data = WPG_READDIRECT_MASK;
 
                 // fill in index
- ultemp = (ulong) index;
+ ultemp = (unsigned long)index;
                 ultemp = ultemp << 8;
                 data |= ultemp;
         } else {
@@ -184,14 +184,14 @@
         }
 
         wpg_data = swab32 (data); // swap data before writing
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMOSUP_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
         writel (wpg_data, wpg_addr);
 
         //--------------------------------------------------------------------
         // READ - step 2 : clear the message buffer
         data = 0x00000000;
         wpg_data = swab32 (data);
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMBUFL_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
         writel (wpg_data, wpg_addr);
 
         //--------------------------------------------------------------------
@@ -199,7 +199,7 @@
         // 2020 : [20] OR operation at [20] offset 0x20
         data = WPG_I2CMCNTL_STARTOP_MASK;
         wpg_data = swab32 (data);
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMCNTL_OFFSET + (ulong) WPG_I2C_OR;
+ wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
         writel (wpg_data, wpg_addr);
 
         //--------------------------------------------------------------------
@@ -207,7 +207,7 @@
         i = CMD_COMPLETE_TOUT_SEC;
         while (i) {
                 long_delay (1 * HZ / 100);
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMCNTL_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
                 wpg_data = readl (wpg_addr);
                 data = swab32 (wpg_data);
                 if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
@@ -223,7 +223,7 @@
         i = CMD_COMPLETE_TOUT_SEC;
         while (i) {
                 long_delay (1 * HZ / 100);
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CSTAT_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
                 wpg_data = readl (wpg_addr);
                 data = swab32 (wpg_data);
                 if (HPC_I2CSTATUS_CHECK (data))
@@ -237,7 +237,7 @@
 
         //--------------------------------------------------------------------
         // READ - step 6 : get DATA
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMBUFL_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
         wpg_data = readl (wpg_addr);
         data = swab32 (wpg_data);
 
@@ -259,12 +259,12 @@
 {
         u8 rc;
         void *wpg_addr; // base addr + offset
- ulong wpg_data, // data to/from WPG LOHI format
- ultemp, data; // actual data HILO format
+ unsigned long wpg_data; // data to/from WPG LOHI format
+ unsigned long ultemp;
+ unsigned long data; // actual data HILO format
         int i;
 
-
- debug_polling ("%s - Entry WPGBbar[%lx] index[%x] cmd[%x]\n", __FUNCTION__, (ulong) WPGBbar, index, cmd);
+ debug_polling ("%s - Entry WPGBbar[%p] index[%x] cmd[%x]\n", __FUNCTION__, WPGBbar, index, cmd);
 
         rc = 0;
         //--------------------------------------------------------------------
@@ -276,17 +276,17 @@
         if (ctlr_ptr->ctlr_type == 0x02) {
                 data = WPG_WRITEATADDR_MASK;
                 // fill in I2C address
- ultemp = (ulong) ctlr_ptr->u.wpeg_ctlr.i2c_addr;
+ ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
                 ultemp = ultemp >> 1;
                 data |= (ultemp << 8);
 
                 // fill in index
- data |= (ulong) index;
+ data |= (unsigned long)index;
         } else if (ctlr_ptr->ctlr_type == 0x04) {
                 data = WPG_WRITEDIRECT_MASK;
 
                 // fill in index
- ultemp = (ulong) index;
+ ultemp = (unsigned long)index;
                 ultemp = ultemp << 8;
                 data |= ultemp;
         } else {
@@ -295,14 +295,14 @@
         }
 
         wpg_data = swab32 (data); // swap data before writing
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMOSUP_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
         writel (wpg_data, wpg_addr);
 
         //--------------------------------------------------------------------
         // WRITE - step 2 : clear the message buffer
- data = 0x00000000 | (ulong) cmd;
+ data = 0x00000000 | (unsigned long)cmd;
         wpg_data = swab32 (data);
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMBUFL_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
         writel (wpg_data, wpg_addr);
 
         //--------------------------------------------------------------------
@@ -310,7 +310,7 @@
         // 2020 : [20] OR operation at [20] offset 0x20
         data = WPG_I2CMCNTL_STARTOP_MASK;
         wpg_data = swab32 (data);
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMCNTL_OFFSET + (ulong) WPG_I2C_OR;
+ wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
         writel (wpg_data, wpg_addr);
 
         //--------------------------------------------------------------------
@@ -318,7 +318,7 @@
         i = CMD_COMPLETE_TOUT_SEC;
         while (i) {
                 long_delay (1 * HZ / 100);
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMCNTL_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
                 wpg_data = readl (wpg_addr);
                 data = swab32 (wpg_data);
                 if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
@@ -335,7 +335,7 @@
         i = CMD_COMPLETE_TOUT_SEC;
         while (i) {
                 long_delay (1 * HZ / 100);
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CSTAT_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
                 wpg_data = readl (wpg_addr);
                 data = swab32 (wpg_data);
                 if (HPC_I2CSTATUS_CHECK (data))
@@ -543,7 +543,7 @@
         int rc = 0;
         int busindex;
 
- debug_polling ("%s - Entry pslot[%lx] cmd[%x] pstatus[%lx]\n", __FUNCTION__, (ulong) pslot, cmd, (ulong) pstatus);
+ debug_polling ("%s - Entry pslot[%p] cmd[%x] pstatus[%p]\n", __FUNCTION__, pslot, cmd, pstatus);
 
         if ((pslot == NULL)
             || ((pstatus == NULL) && (cmd != READ_ALLSTAT) && (cmd != READ_BUSSTATUS))) {
@@ -683,7 +683,7 @@
         int rc = 0;
         int timeout;
 
- debug_polling ("%s - Entry pslot[%lx] cmd[%x]\n", __FUNCTION__, (ulong) pslot, cmd);
+ debug_polling ("%s - Entry pslot[%p] cmd[%x]\n", __FUNCTION__, pslot, cmd);
         if (pslot == NULL) {
                 rc = -EINVAL;
                 err ("%s - Error Exit rc[%d]\n", __FUNCTION__, rc);
@@ -976,7 +976,7 @@
 {
         int rc = 0;
 
- debug ("%s - Entry pslot[%lx]\n", __FUNCTION__, (ulong) pslot);
+ debug ("%s - Entry pslot[%p]\n", __FUNCTION__, pslot);
         rc = ibmphp_hpc_readslot (pslot, READ_ALLSTAT, NULL);
         debug ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
         return rc;
@@ -1004,8 +1004,7 @@
         u8 disable = FALSE;
         u8 update = FALSE;
 
- debug ("process_changeinstatus - Entry pslot[%lx], poldslot[%lx]\n", (ulong) pslot,
- (ulong) poldslot);
+ debug ("process_changeinstatus - Entry pslot[%p], poldslot[%p]\n", pslot, poldslot);
 
         // bit 0 - HPC_SLOT_POWER
         if ((pslot->status & 0x01) != (poldslot->status & 0x01))
diff -Nru a/drivers/pci/hotplug/ibmphp_res.c b/drivers/pci/hotplug/ibmphp_res.c
--- a/drivers/pci/hotplug/ibmphp_res.c Wed Jun 25 17:37:49 2003
+++ b/drivers/pci/hotplug/ibmphp_res.c Wed Jun 25 17:37:49 2003
@@ -42,7 +42,7 @@
 static int update_bridge_ranges (struct bus_node **);
 static int add_range (int type, struct range_node *, struct bus_node *);
 static void fix_resources (struct bus_node *);
-static inline struct bus_node *find_bus_wprev (u8, struct bus_node **, u8);
+static struct bus_node *find_bus_wprev (u8, struct bus_node **, u8);
 
 static LIST_HEAD(gbuses);
 LIST_HEAD(ibmphp_res_head);
@@ -1757,7 +1757,7 @@
         return find_bus_wprev (bus_number, NULL, 0);
 }
 
-static inline struct bus_node *find_bus_wprev (u8 bus_number, struct bus_node **prev, u8 flag)
+static struct bus_node *find_bus_wprev (u8 bus_number, struct bus_node **prev, u8 flag)
 {
         struct bus_node *bus_cur;
         struct list_head *tmp;

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon Jun 30 2003 - 22:00:22 EST