Some new info about my problem - when there is no disk drive connected,
the drives loads cleanly. But when I connect the PATA drive (I don't have
currently
SATA disk drive free for testing) I got this message. I got clean SuSE 8.0
installed.
I will write this to promise, any idea what could be wrong? This is the
original promise
driver, now I am going to try the other driver.
Thank you for the answer
Milan Roubal
PROMISE SATA150 Series Linux Driver v1.00.0.6
PCI: Found IRQ 10 for device 02:04.0
Drive 5 - WDC WD1000JB-32CWE0 195371567s 100030MB UDMA5
scsi1 : pdc-ultra
scsi: unknown type 31
Vendor: ST 0123 Model: 456789ABCDEFGHIJ Rev: KLMN
Type: Unknown ANSI SCSI revision: 07
scsi: unknown type 31
Vendor: ST 0123 Model: 456789ABCDEFGHIJ Rev: KLMN
Type: Unknown ANSI SCSI revision: 07
scsi: unknown type 31
Vendor: ST 0123 Model: 456789ABCDEFGHIJ Rev: KLMN
Type: Unknown ANSI SCSI revision: 07
scsi: unknown type 31
Vendor: ST 0123 Model: 456789ABCDEFGHIJ Rev: KLMN
Type: Unknown ANSI SCSI revision: 07
Vendor: Model: WDC WD1000JB-32C Rev:
Type: Direct-Access ANSI SCSI revision: 02
Vendor: Model: WDC WD1000JB-32C Rev:
Type: Direct-Access ANSI SCSI revision: 02
Vendor: Model: WDC WD1000JB-32C Rev:
Type: Direct-Access ANSI SCSI revision: 02
Vendor: Model: WDC WD1000JB-32C Rev:
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 31
Attached scsi generic sg2 at scsi1, channel 0, id 1, lun 0, type 31
Attached scsi generic sg3 at scsi1, channel 0, id 2, lun 0, type 31
Attached scsi generic sg4 at scsi1, channel 0, id 3, lun 0, type 31
Attached scsi disk sda at scsi1, channel 0, id 4, lun 0
Attached scsi disk sdb at scsi1, channel 0, id 5, lun 0
Attached scsi disk sdc at scsi1, channel 0, id 6, lun 0
Attached scsi disk sdd at scsi1, channel 0, id 7, lun 0
resize_dma_pool: unknown device type 31
resize_dma_pool: unknown device type 31
resize_dma_pool: unknown device type 31
resize_dma_pool: unknown device type 31
SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
sda:kernel BUG at <bad filename>:14979!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c6880146>] Not tainted
EFLAGS: 00010046
eax: 0685a000 ebx: 00000018 ecx: c009e000 edx: c009e018
esi: 00000003 edi: 00000004 ebp: c685b400 esp: c69afc44
ds: 0018 es: 0018 ss: 0018
Process modprobe (pid: 443, stackpage=c69af000)
Stack: c685b400 c033f000 c009e000 c31ea61c c1000020 00000004 c688296c
c1792800
c685b400 00000293 c686dc58 c685b400 c31ea5a0 00000000 c68cf480
c1818000
c009e000 c01b45ea c686dc00 00000001 00000002 00000800 c68cf480
c009e000
Call Trace: [<c688296c>] [<c01b45ea>] [<c01e3f7d>] [<c01e0b82>] [<c01e56e8>]
[<c01e6f2f>] [<c01b3c88>] [<c011d02c>] [<c013aa9e>] [<c0129508>]
[<c012954c>]
[<c012b7f6>] [<c0157fe6>] [<c013c22c>] [<c0158e2e>] [<c0159022>]
[<c014947a>]
[<c013c5ae>] [<c0157e14>] [<c01195f3>] [<c01eb731>] [<c0157f79>]
[<c0157eb7>]
[<c01ebdb5>] [<c688006a>] [<c01e1bdf>] [<c688a2a0>] [<c688006a>]
[<c688006a>]
[<c01e2206>] [<c688a2a0>] [<c6882e1e>] [<c688a2a0>] [<c011a10d>]
[<c6880060>]
[<c0108833>]
Code: 0f 0b 83 3a 00 74 13 8b 02 05 00 00 00 40 89 42 0c c7 42 10
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Jul 15 2003 - 22:00:33 EST