Hi,
I've a Matrox Millenium card and I want to run the framebuffer.
I've set the following configuration :
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_HGA is not set
CONFIG_VIDEO_SELECT=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MATROX_G450 is not set
# CONFIG_FB_MATROX_G100A is not set
CONFIG_FB_MATROX_PROC=m
# CONFIG_FB_MATROX_MULTIHEAD is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FBCON_ADVANCED=y
CONFIG_FBCON_MFB=y
# CONFIG_FBCON_CFB2 is not set
# CONFIG_FBCON_CFB4 is not set
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
# CONFIG_FBCON_AFB is not set
# CONFIG_FBCON_ILBM is not set
# CONFIG_FBCON_IPLAN2P2 is not set
# CONFIG_FBCON_IPLAN2P4 is not set
# CONFIG_FBCON_IPLAN2P8 is not set
# CONFIG_FBCON_MAC is not set
And I pass the parameter video=matrox to the kernel.
I tried video=matrox:vesa=<something> without any success.
Here are the boot lines from dmesg :
[root@tangerine] /usr/src/linux/drivers/video/matrox # dmesg | more
Linux version 2.4.21 (root@tangerine) (version gcc 3.3.1 20030626
(Debian prerel
ease)) #1 mar jui 15 18:40:01 CEST 2003 matroxfb_Ti3026.c
BIOS-provided physical RAM map:50.h matroxfb_Ti3026.h
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)s
matroxfb_base.c BIOS-e820: 0000000000100000 - 0000000017ffc000
(usable)ess /boot/
config
BIOS-e820: 0000000017ffc000 - 0000000017fff000 (ACPI data)
BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS)s /boot/
config-2.4.21 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
383MB LOWMEM available.
On node 0 totalpages: 98300
zone(0): 4096 pages.
zone(1): 94204 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda2 reboot=warm hdc=ide-scsi hdd=ide-
scsi pci=bi
osirq video=matrox
ide_setup: hdc=ide-scsi
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 501.160 MHz processor.
Console: colour VGA+ 80x25
If I compile a vesa framebuffer, it works but not accelerated.
--- Regards Jean-Luc---------------------------------------------------------------------------- Jean-Luc Coulon 28 rue d'Evette 90350 Evette-Salbert FRANCE - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Jul 15 2003 - 22:00:59 EST