Many of these have already been addressed in 0.1.9, though I added the
usage of the native clock, assertion for it, the dvi blanking, and the
nolcd passthrough. For things like the updated PM code, a patch would be
helpful.
ani
On 16 Jul 2003, Benjamin Herrenschmidt wrote:
> On Wed, 2003-07-16 at 15:05, Marcelo Tosatti wrote:
> > Ani,
> >
> > I'm sending your patch to lkml CC benh.
> >
> > All changes should be reviewed publically.
>
> hrm... ok, here are my complaints against 0.1.9:
>
> - rinfo->name shall not be a pointer to an entry stored in a
> __devinitdata array, or get_fix() would possibly access freed
> memory
>
> - you didn't take my code for obtaining the DFP info from the
> BIOS. The current code works only with some flat panels (laptops
> mostly in my understanding). Also, I defaulted to syncs active
> high when using the "old" code, that fixed some laptops and is
> what XFree does
>
> - On LCDs you should use the LCD native pixel clock when using
> the RMX engine, not the mode specified one. Without this, scaled
> mode in XFree won't work properly among others on a lot of panels
>
> - The workaround when setting PLL registers helped some laptop
> users (not writing them when they don't change)
>
> - I added some sanity checking to the clocks we obtain from
> the BIOS pll block, especially since we now have relaxed algorithm
> to find the BIOS, that makes sense
>
> - If you fail to retreive BIOS infos, rinfo->clock can be 0 and
> you divide by 0 when setting the mode
>
> - After much discussions with some other hackers, I decided to
> keep the pitch to match exactly xres when accel is not enabled for
> various old apps that can't deal with a line lenght beeing different,
> you didn't take that code, so 0.1.9 won't work with those apps.
>
> - I added some code that helps blanking on some DVI panels in
> radeonfb_blank
>
> - When force_nolcd is set, I want to still call getmoninfo,
> not break (in radeonfb_pci_register())
>
> - There are more cases in radeonfb_switch where you want to
> reprogram the mode. Typically, accel flag changes, 15/16 bits
> changes, etc... Also, I worked around some XFree bugs by
> always re-initing the engine. It's not perfect yet, hopefully
> X will be fixed sooner or later, though I had no time to
> investigate that much yet.
>
> - I don't like the "workaround" disabling dynamic clocks in
> XFree, the code ATI gave me for M6, M7 and M9 on Apple HW enabled
> dynamic clocks, so I suspect those work properly, and I want the
> power saving. I suppose we shall discuss that with ATI to find out
> a better workaround
>
> - The "PM" code isn't up to date (cleanups & small fixes I did)
>
> - Not important, but inconsistent use of tab/space (you basically
> replace all tabs by spaces in code you touched) can be painful ;)
>
>
> I may have missed one or two though...
>
> Ben.
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jul 23 2003 - 22:00:25 EST