Re: Onstream DI-30 not responding 2.6

From: Bartlomiej Zolnierkiewicz (B.Zolnierkiewicz@elka.pw.edu.pl)
Date: Thu Jul 17 2003 - 12:46:11 EST


Hi,

ide-tape driver is broken right now in 2.6.
Config option for it is commented out because
it even doesn't compile (easy to fix).

I can help a bit if somebody wants to fix this driver.

--
Bartlomiej

On Thu, 17 Jul 2003, Stef van der Made wrote: > > Hi > > I'm trying to use my Onstream DI-30 (IDE) tape device with Kernel > 2.6.0-test1. When trying to access the drive using the old 2.2 kernels > and 2.4 these commands worked fine > > bash-2.05# mt -f /dev/nht0 status > /dev/nht0: No such device > bash-2.05# mt -f /dev/ht0 status > /dev/ht0: No such device > bash-2.05# mt -f /dev/hdd status > /dev/hdd: No such device or address > bash-2.05# mt -f /dev/hdc status > /dev/hdc: No such device or address > > While they now are showing ugly errors. > > This is a part of the boot log > > VP_IDE: IDE controller at PCI slot 0000:00:07.1 > VP_IDE: chipset revision 16 > VP_IDE: not 100% native mode: will probe irqs later > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1 > ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:DMA > ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:DMA > hda: WDC WD205BA, ATA DISK drive > anticipatory scheduling elevator > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > hdd: OnStream DI-30, ATAPI TAPE drive > > > Thanks in advance for any tips on a solution for this problem. > > Stef

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Wed Jul 23 2003 - 22:00:30 EST