http://bugme.osdl.org/show_bug.cgi?id=956
Summary: Kernel hangs when using a primary and secondary IDE
controller under software raid0
Kernel Version: 2.4.20-18.9 and 2.6.0-mm1-ac2
Status: NEW
Severity: high
Owner: bugme-janitors@lists.osdl.org
Submitter: SpamBox@cableone.net
Distribution:RedHat 9.0
Hardware Environment:K7V motherboard with onboard ATA66 controller. Secondary
controller is Promise PCD20268 - ATA100
Software Environment: 2.4.20-18.9 and 2.6.0-mm1-ac2
Problem Description: I'm attempting to use 3 HDs under software raid0. My
Maxtor 40GB HD is attached
to the ATA66 onboard controller on my K7V motherboard, and my two 20GB IBM HDs
are attached to the secondary Promise controller (PDC20268 - ATA100).
If I create a raid0 configuration consisting only of my two IBM HDs everything
is fine. When using all 3 HDs the kernel locks up so tightly that even
Alt+SysRq+T does not respond.
All three HDs can be used in Linux provided they are not used in raid.
Tests were run using ext3 and ext2.
I have researched the problem for a couple weeks and the only work-around I
have found is using ide=nodma which is not a very desirable solution.
I will be glad to add additional info if it is needed. Just let me know.
Steps to reproduce:
1. The problem should be reproducable by using a primary and secondary IDE
controller under software raid0.
2.Run bonnie++
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jul 23 2003 - 22:00:35 EST