Hello ,
I have patched the module update 0.9.13-pre and rebuilt kernel. However, the insmod is still complainthe same thing because the utility is still from 2.4.20-8. This driver module is not going to be loaded during the kernel boot. I want to use insmod to load the module. I tried load qla1280.o built with kernel and got the same result.
I think I may either need a new insmod utility to load the module, missed something or need to follow different procedure. Any idea from this point?
By the way, I am using RH 9.0 release as base system fo r2.5.72 upgrade.
Thanks!
Eddie
> -----Original Message-----
> From: Cesar Suga [mailto:sartre@linuxbr.com]
> Sent: Friday, July 18, 2003 5:27 AM
> To: yiding_wang@agilent.com
> Subject: RE: 2.5.72 insmod question
>
>
> On Fri, 2003-07-18 at 14:50, yiding_wang@agilent.com wrote:
>
> You're welcome;
>
> I've come with some shortcomings upgrading, too...
>
> []s,
> Cesar Suga <sartre@linuxbr.com>
>
> > Thanks for the help!
> >
> > > -----Original Message-----
> > > From: Cesar Suga [mailto:sartre@linuxbr.com]
> > > Sent: Friday, July 18, 2003 3:00 AM
> > > To: yiding_wang@agilent.com
> > > Cc: linux-kernel@vger.kernel.org
> > > Subject: Re: 2.5.72 insmod question
> > >
> > >
> > > On Thu, 2003-07-17 at 21:35, yiding_wang@agilent.com wrote:
> > >
> > > Hello,
> > >
> > > Install the 'module-init-tools' package, from:
> > >
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/rusty/modules/
> > >
> > > This is required for the new series of kernels,
> > > starting with 2.5.50 (I
> > > think), 2.5.72 certainly requires it.
> > >
> > > Cheers,
> > > Cesar Suga <sartre@linuxbr.com>
> > >
> > > > I completed a fibre channel driver change to support for
> > > 2.5.72 (suppose to be 2.6 compatible) and compiled it OK.
> > > When trying load the driver with "insmod", it complains with
> > > the message "insmod: QM_MODULES: Function not implemented".
> > > >
> > > > I tried kernel built module qla1280.o and got the same
> > > result. It seems the insmod utility in my system is not
> > > compatible with new 2.5.72 built module.
> > > >
> > > > I have 2.4.20-8 kernel installed first and driver loads and
> > > runs fine. Later added 2.5.72 kernel and booted with its
> > > bzImage works fine too. However, the insmod utility I am
> > > using to load new driver was from 2.4.20-8 which has
> > > system_query_module() being called. I checked Doc. and
> > > source code for 2.5.72 and could not find same function call
> > > in module.c
> > > >
> > > > Some web documents mentioned that the module installation
> > > is changed from 2.4.x to 2.5.x. So far I am still looking
> > > for the solution and hope someone can help me on the issue.
> > > >
> > > > I am compiling the driver out side of kernel source tree
> > > but using kernel environmental variables for compatibility.
> > > >
> > > > Regards,
> > > >
> > > > Eddie
> > > >
> > > >
> > > >
> > > > -
> > > > To unsubscribe from this list: send the line "unsubscribe
> > > linux-kernel" in
> > > > the body of a message to majordomo@vger.kernel.org
> > > > More majordomo info at
http://vger.kernel.org/majordomo-info.html
> > > Please read the FAQ at http://www.tux.org/lkml/
> > >
> >
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jul 23 2003 - 22:00:44 EST