rmodehelper returned -16 bus ide: add device 0.0 hdc: NEC CD-ROM DRIVE:28D, ATAPI CD/DVD-ROM drive DEV: registering device: ID = 'ide1', name = IDE Controller kobject ide1: registering. parent: 0000:00:07.1, set: devices ide1 at 0x170-0x177,0x376 on irq 15 DEV: registering device: ID = '1.0', name = IDE Drive kobject 1.0: registering. parent: ide1, set: devices kset_hotplug fill_kobj_path: path = '/devices/pci0000:00/0000:00:07.1/ide1/1.0' kset_hotplug: /sbin/hotplug ide HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add SEQNUM=102 kset_hotplug - call_usermodehelper returned -16 bus ide: add device 1.0 PDC20269: IDE controller at PCI slot 0000:00:0e.0 PDC20269: chipset revision 2 PDC20269: 100% native mode on irq 10 ide2: BM-DMA at 0x1010-0x1017, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x1018-0x101f, BIOS settings: hdg:pio, hdh:pio bus pci: add driver AEC62xx IDE kobject AEC62xx IDE: registering. parent: , set: drivers bus pci: add driver ALI15x3 IDE kobject ALI15x3 IDE: registering. parent: , set: drivers bus pci: add driver AMD IDE kobject AMD IDE: registering. parent: , set: drivers bus pci: add driver CMD64x IDE kobject CMD64x IDE: registering. parent: , set: drivers bus pci: add driver SC1200 IDE kobject SC1200 IDE: registering. parent: , set: drivers bus pci: add driver Cypress IDE kobject Cypress IDE: registering. parent: , set: drivers bus pci: add driver HPT34x IDE kobject HPT34x IDE: registering. parent: , set: drivers bus pci: add driver HPT366 IDE kobject HPT366 IDE: registering. parent: , set: drivers bus pci: add driver NS87415IDE kobject NS87415IDE: registering. parent: , set: drivers bus pci: add driver Opti621 IDE kobject Opti621 IDE: registering. parent: , set: drivers bus pci: add driver Promise Old IDE kobject Promise Old IDE: registering. parent: , set: drivers bus pci: add driver Promise IDE kobject Promise IDE: registering. parent: , set: drivers bound device '0000:00:0e.0' to driver 'Promise IDE' bus pci: add driver PIIX IDE kobject PIIX IDE: registering. parent: , set: drivers bound device '0000:00:07.1' to driver 'PIIX IDE' bus pci: add driver RZ1000 IDE kobject RZ1000 IDE: registering. parent: , set: drivers bus pci: add driver Serverworks IDE kobject Serverworks IDE: registering. parent: , set: drivers bus pci: add driver SiI IDE kobject SiI IDE: registering. parent: , set: drivers bus pci: add driver SIS IDE kobject SIS IDE: registering. parent: , set: drivers bus pci: add driver SLC90e66 IDE kobject SLC90e66 IDE: registering. parent: , set: drivers bus pci: add driver TRIFLEX IDE kobject TRIFLEX IDE: registering. parent: , set: drivers bus pci: add driver TRM290 IDE kobject TRM290 IDE: registering. parent: , set: drivers bus pci: add driver VIA IDE kobject VIA IDE: registering. parent: , set: drivers bus pci: add driver PCI IDE kobject PCI IDE: registering. parent: , set: drivers hda: max request size: 128KiB hda: host protected area => 1 hda: 53464320 sectors (27374 MB) w/1961KiB Cache, CHS=53040/16/63, UDMA(33) kobject hda: registering. parent: , set: block kset_hotplug fill_kobj_path: path = '/block/hda' kset_hotplug: /sbin/hotplug block HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add SEQNUM=103 kset_hotplug - call_usermodehelper returned -16 hda: hda1 hda2 kobject hda1: registering. parent: hda, set: kset_hotplug fill_kobj_path: path = '/block/hda/hda1' kset_hotplug: /sbin/hotplug block HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add SEQNUM=104 kset_hotplug - call_usermodehelper returned -16 kobject hda2: registering. parent: hda, set: kset_hotplug fill_kobj_path: path = '/block/hda/hda2' kset_hotplug: /sbin/hotplug block HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add SEQNUM=105 kset_hotplug - call_usermodehelper returned -16 kobject queue: registering. parent: hda, set: kobject iosched: registering. parent: queue, set: bus ide: add driver ide-disk kobject ide-disk: registering. parent: , set: drivers bus pci: add driver aic7xxx kobject aic7xxx: registering. parent: , set: drivers bus scsi: add driver sd kobject sd: registering. parent: , set: drivers mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 768.000 MB/sec 8regs_prefetch: 696.000 MB/sec 32regs : 520.000 MB/sec 32regs_prefetch: 484.000 MB/sec pII_mmx : 1108.000 MB/sec p5_mmx : 1148.000 MB/sec raid5: using function: p5_mmx (1148.000 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 1.0.6-ioctl (2002-10-15) initialised: dm@uk.sistina.com NET4: Frame Diverter 0.46 kobject netlink: registering. parent: , set: major NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kobject lapic_nmi: registering. parent: , set: system kobject lapic_nmi0: registering. parent: , set: lapic_nmi BIOS EDD facility v0.09 2003-Jan-22, 1 devices found subsystem edd: registering kobject edd: registering. parent: , set: firmware kobject int13_dev80: registering. parent: , set: edd kobject md0: registering. parent: , set: block kset_hotplug fill_kobj_path: path = '/block/md0' kset_hotplug: /sbin/hotplug block HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add SEQNUM=106 kset_hotplug - call_usermodehelper returned -16 kobject queue: registering. parent: md0, set: kobject iosched: registering. parent: queue, set: md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda1) for (hda1) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 196k freed Adding 364888k swap on /dev/hda2. Priority:1 extents:1 subsystem usb: registering kobject usb: registering. parent: , set: bus kobject devices: registering. parent: usb, set: kobject drivers: registering. parent: usb, set: bus type 'usb' registered device class 'usb_host': registering subsystem usb_host: registering kobject usb_host: registering. parent: , set: class kobject usb: registering. parent: , set: major device class 'usb': registering subsystem usb: registering kobject usb: registering. parent: , set: class bus usb: add driver usbfs kobject usbfs: registering. parent: , set: drivers drivers/usb/core/usb.c: registered new driver usbfs bus usb: add driver hub kobject hub: registering. parent: , set: drivers drivers/usb/core/usb.c: registered new driver hub bus usb: add driver usb kobject usb: registering. parent: , set: drivers bus usb: add driver usbmouse kobject usbmouse: registering. parent: , set: drivers drivers/usb/core/usb.c: registered new driver usbmouse drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 bus pci: add driver uhci-hcd kobject uhci-hcd: registering. parent: , set: drivers uhci-hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 uhci-hcd 0000:00:07.2: irq 9, io base 00001020 CLASS: registering class device: ID = 'usb1' kobject usb1: registering. parent: usb_host, set: class_obj kset_hotplug fill_kobj_path: path = '/class/usb_host/usb1' class_hotplug - name = usb1 kset_hotplug: /sbin/hotplug usb_host HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add SEQNUM=107 uhci-hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 DEV: registering device: ID = 'usb1', name = Intel Corp. 82371AB/EB/MB PIIX4 (Linux 2.6.0-tes kobject usb1: registering. parent: 0000:00:07.2, set: devices kset_hotplug fill_kobj_path: path = '/devices/pci0000:00/0000:00:07.2/usb1' kset_hotplug: /sbin/hotplug usb HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add SEQNUM=108 bus usb: add device usb1 bound device 'usb1' to driver 'usb' DEV: registering device: ID = '1-0:0', name = usb-0000:00:07.2-0 interface 0 kobject 1-0:0: registering. parent: usb1, set: devices kset_hotplug fill_kobj_path: path = '/devices/pci0000:00/0000:00:07.2/usb1/1-0:0' kset_hotplug: /sbin/hotplug usb HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add SEQNUM=109 bus usb: add device 1-0:0 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected bound device '1-0:0' to driver 'hub' bound device '0000:00:07.2' to driver 'uhci-hcd' bus pci: add driver 3c59x kobject 3c59x: registering. parent: , set: drivers PCI: Enabling device 0000:00:0d.0 (0114 -> 0117) 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:0d.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x1080. Vers LK1.1.19 divert: allocating divert_blk for eth0 CLASS: registering class device: ID = 'eth0' kobject eth0: registering. parent: net, set: class_obj kset_hotplug fill_kobj_path: path = '/class/net/eth0' class_hotplug - name = eth0 kset_hotplug: /sbin/hotplug net HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add SEQNUM=110 kobject statistics: registering. parent: eth0, set: bound device '0000:00:0d.0' to driver '3c59x' eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others bus pci: add driver eepro100 kobject eepro100: registering. parent: , set: drivers Linux Tulip driver version 1.1.13 (May 11, 2002) bus pci: add driver tulip kobject tulip: registering. parent: , set: drivers hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x301 8139too Fast Ethernet driver 0.9.26 bus pci: add driver 8139too kobject 8139too: registering. parent: , set: drivers hub 1-0:0: new USB device on port 2, assigned address 2 pcnet32.c:v1.27b 01.10.2002 tsbogend@alpha.franken.de bus pci: add driver pcnet32 kobject pcnet32: registering. parent: , set: drivers DEV: registering device: ID = '1-2', name = USB Mouse (Logitech) kobject 1-2: registering. parent: usb1, set: devices kset_hotplug fill_kobj_path: path = '/devices/pci0000:00/0000:00:07.2/usb1/1-2' kset_hotplug: /sbin/hotplug usb HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add SEQNUM=111 bus usb: add device 1-2 bound device '1-2' to driver 'usb' DEV: registering device: ID = '1-2:0', name = usb-0000:00:07.2-2 interface 0 kobject 1-2:0: registering. parent: 1-2, set: devices kset_hotplug fill_kobj_path: path = '/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:0' kset_hotplug: /sbin/hotplug usb HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add SEQNUM=112 bus usb: add device 1-2:0 subsystem ide-scsi: registering kobject ide-scsi: registering. parent: , set: bus kobject devices: registering. parent: ide-scsi, set: kobject drivers: registering. parent: ide-scsi, set: bus type 'ide-scsi' registered DEV: registering device: ID = 'ide-scsi', name = Ide-scsi Parent kobject ide-scsi: registering. parent: , set: devices scsi0 : SCSI host adapter emulation for IDE ATAPI devices DEV: registering device: ID = 'host0', name = ide-scsi kobject host0: registering. parent: ide-scsi, set: devices CLASS: registering class device: ID = 'host0' kobject host0: registering. parent: scsi_host, set: class_obj kset_hotplug fill_kobj_path: path = '/class/scsi_host/host0' class_hotplug - name = host0 kset_hotplug: /sbin/hotplug scsi_host HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add SEQNUM=113 input: Logitech USB Mouse on usb-0000:00:07.2-2 bound device '1-2:0' to driver 'usbmouse' Vendor: NEC Model: CD-ROM DRIVE:28D Rev: 3.04 Type: CD-ROM ANSI SCSI revision: 02 DEV: registering device: ID = '0:0:0:0', name = SCSI CD-ROM kobject 0:0:0:0: registering. parent: host0, set: devices kset_hotplug fill_kobj_path: path = '/devices/ide-scsi/host0/0:0:0:0' kset_hotplug: /sbin/hotplug scsi HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add SEQNUM=114 bus scsi: add device 0:0:0:0 CLASS: registering class device: ID = '0:0:0:0' kobject 0:0:0:0: registering. parent: scsi_device, set: class_obj kset_hotplug fill_kobj_path: path = '/class/scsi_device/0:0:0:0' class_hotplug - name = 0:0:0:0 kset_hotplug: /sbin/hotplug scsi_device HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add SEQNUM=115 bus ide: add driver ide-scsi kobject ide-scsi: registering. parent: , set: drivers bus usb: add driver hiddev kobject hiddev: registering. parent: , set: drivers drivers/usb/core/usb.c: registered new driver hiddev bus usb: add driver hid kobject hid: registering. parent: , set: drivers drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver Adding 262136k swap on /usr/swap_file. Priority:2 extents:38 bus pci: add driver ehci_hcd kobject ehci_hcd: registering. parent: , set: drivers Unable to handle kernel paging request at virtual address d493885c printing eip: c01d3cb7 *pde = 040ce067 Oops: 0002 [#1] CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010292 EIP is at kobject_add+0xa3/0x124 eax: c03d2980 ebx: d49550c4 ecx: d493885c edx: d49550dc esi: c03d2988 edi: c03d2924 ebp: d3ae3f28 esp: d3ae3f1c ds: 007b es: 007b ss: 0068 Process modprobe (pid: 209, threadinfo=d3ae2000 task=d39612e0) Stack: d49550c4 d49550c4 00000000 d3ae3f40 c01d3d50 d49550c4 d49550c4 d49550c4 c03d2920 d3ae3f70 c0238f2e d49550c4 d49550c4 d4953a8a 00000014 c036001c c0341452 d4953a8a d4955080 00000000 d4955120 d3ae3f7c c023931a d49550a8 Call Trace: [] kobject_register+0x18/0x48 [] bus_add_driver+0x52/0xa0 [] driver_register+0x36/0x3c [] pci_register_driver+0x74/0x9c [] init+0x1e/0x4c [ehci_hcd] [] sys_init_module+0x118/0x240 [] syscall_call+0x7/0xb Code: 89 11 8b 43 24 8b 38 8d 4f 44 89 c8 ba ff ff 00 00 f0 0f c1 <7>ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci-hcd: block sizes: ed 64 td 64 bus pci: add driver ohci-hcd kobject ohci-hcd: registering. parent: , set: drivers SysRq : HELP : loglevel0-8 reBoot tErm kIll saK showMem powerOff showPc unRaw Sync showTasks Unmount SysRq : SAK SAK: killed process 13 (init): p->session==tty->session SAK: killed process 14 (rcS): p->session==tty->session SAK: killed process 205 (S36hotplug): p->session==tty->session SAK: killed process 207 (usb.rc): p->session==tty->session SAK: killed process 210 (modprobe): p->session==tty->session Installing knfsd (copyright (C) 1996 okir@monad.swb.de). RPC: sendmsg returned error 101 portmap: RPC call returned error 101 RPC: sendmsg returned error 101 portmap: RPC call returned error 101 RPC: sendmsg returned error 101 portmap: RPC call returned error 101 process `snmpd' is using obsolete setsockopt SO_BSDCOMPAT