> Hi,
>
> I am getting "hw tcp v4 csum failed" errors using a BCM5701 ethernet
> adapter with the tigon3 driver in a vanilla 2.4.20 kernel.
>
> There seems to be no apparent problem (probably because of low-load).
>
> What can be the cause of these errors?
if it isnt a software problem.
Its probably a problem releated to the cable or surrounding
interference on the cable.
a) loose connection either on back of machine or @ the hub / switch etc..
b) there is a large power supply sitting very close to the cable.
i have seen the transformers on scanners / printers etc.. strong enough
todo this is the cable gets wrapped around it
James
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Jul 31 2003 - 22:00:34 EST