Hi,
While booting 2.6.0-test2 on my i875P based PC I get the following:
<snip>
Adding 787176k swap on /dev/hda3. Priority:-1 extents:1
irq 18: nobody cared!
Call Trace:
[<c010cf76>] __report_bad_irq+0x2a/0x8b
[<c010d060>] note_interrupt+0x6f/0x9f
[<c010d38d>] do_IRQ+0x175/0x1a6
[<c010884e>] default_idle+0x0/0x2d
[<c010884e>] default_idle+0x0/0x2d
[<c010b5c4>] common_interrupt+0x18/0x20
[<c010884e>] default_idle+0x0/0x2d
[<c010884e>] default_idle+0x0/0x2d
[<c0108878>] default_idle+0x2a/0x2d
[<c01088ee>] cpu_idle+0x39/0x42
[<c0105000>] rest_init+0x0/0x65
[<c035a83e>] start_kernel+0x191/0x1ca
[<c035a403>] unknown_bootoption+0x0/0xff
handlers:
[<c01ef51c>] (ide_intr+0x0/0x1d4)
Disabling IRQ #18
IRQ 18 belongs to the SATA interface:
ide2 at 0xefe0-0xefe7,0xefae on irq 18
Funny thing is that the SATA drive is still usable while the irq
is disabled.
I also noticed that the interrupt count for IRQ 18 is still rather high
(as I mention in a previous mail):
CPU0 CPU1
0: 552358 0 IO-APIC-edge timer
2: 0 0 XT-PIC cascade
9: 0 0 IO-APIC-level acpi
14: 11122 0 IO-APIC-edge ide0
15: 1 0 IO-APIC-edge ide1
16: 42146 0 IO-APIC-level uhci-hcd, nvidia
17: 0 0 IO-APIC-level Intel ICH5
18: 100013 99992 IO-APIC-level ide2
19: 14627 0 IO-APIC-level uhci-hcd
20: 2 0 IO-APIC-level ohci1394
21: 530 0 IO-APIC-level eth0
23: 0 0 IO-APIC-level ehci_hcd
NMI: 0 0
LOC: 552289 552628
ERR: 0
MIS: 4
Any solutions?
Cheers,
Jurgen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 07 2003 - 22:00:16 EST