On Sat, 2003-08-02 at 18:08, Russell King wrote:
> On Sat, Jul 26, 2003 at 07:31:59PM +0100, Stefan Jones wrote:
> > It seems the the change from 2.4 to 2.6 made the state read from
> > yenta_get_status change it's return value. It reads it from hardware.
>
> The get_status function is called multiple times during card
> initialisation. I doubt that it is valid to compare the get_status
> values from 2.4 and 2.6 kernels, without examining what's going on
> in the cs.c code.
>
> It would be helpful if you could apply the patch to cs.c which I've
> recently posted to lkml, and report back the full kernel messages,
> including the messages you get from your printk in yenta_get_status().
>
> The message id was: <20030802173352.A1895@flint.arm.linux.org.uk>
Ok, here is the result. I had to use "probe_mem=0" to stop my machine
hanging ( as I said before).
I started pcmcia
"/etc/init.d/pcmcia start"
I then inserted card for the first time and nothing happened ..
removed it and reinserted it was configured fine.
Thanks for your time,
Stefan
Log:
[ Snip .... ]
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Yenta IRQ list 0038, PCI irq11
Socket status: 30000417
parse_events: socket d080002c thread ce4db3c0 events 00000080
yenta_get_status: status=30000417
socket d080002c status 00000041
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x2c8-0x2cf 0x378-0x37f 0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
yenta_get_status: status=30000417
**** INSERT card first time nothing gets printed
**** REINSERT card and I get this;
parse_events: socket d080002c thread ce4db3c0 events 00000080
yenta_get_status: status=30000417
socket d080002c status 00000041
parse_events: socket d080002c thread ce4db3c0 events 00000080
yenta_get_status: status=30000411
socket d080002c status 000000c1
socket_insert: skt d080002c
yenta_get_status: status=30000411
socket_setup: skt d080002c status 000000c1
yenta_get_status: status=30000411
socket_reset: skt d080002c
yenta_get_status: status=30000419
yenta_get_status: status=30000419
orinoco.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)
orinoco_cs.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)
eth1: Station identity 001f:0006:0001:0003
eth1: Looks like an Intersil firmware version 1.3.6
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:09:5B:4A:B1:B6
eth1: Station name "Prism I"
eth1: ready
eth1: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 07 2003 - 22:00:21 EST