Re: UPDATE: 2.4.22-pre9, 8139too driver: eth0: Too much work at interrupt

[Marc Heckmann]

hi.

turns out the problem was my fault. I had been tweaking the
pci latency_timer setting for the sound card using "setpci",
I had set it too high and the sound card was hogging the bus,
so to speak.

Hope this is helpful for others who might be experiencing this.

Anyway, may I just say that 2.4.22-pre9+ is turning out to be one of
the best kernels yet for me.

-m

On Tue, Aug 05, 2003 at 11:58:11AM -0400, Marc Heckmann wrote:
> Hi,
> 
> [I searched lkml archives for this, but nothing really useful came up,
> othewr than it did not happen on much older versions of 2.4.x]
> 
> When I transfer any large files via scp or other means on the local
> 100 Mbps network, I get the following error messages:
> 
> eth0: Too much work at interrupt: IntrStatus=0x0040
> 
> Are they just debug printk's? My NFS connections stall and sometimes
> cause errors in programs writing via NFS. (The machine exhibiting the
> symptoms is the NFS client.)
> 
> This is with 2.4.22-pre9, UP IO-APIC and ACPI enabled. The board is a
> Gigabyte GA7VXP with onboard 8139 ethernet.
> 
> This also happens with 2.4.21. I haven't tried any older kernels since
> the machine is new.
> 
> Does anyone have any ideas? thanks in advance.
> 
> -m
> 
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/