[PATCH] Next round of ACPI IRQ fixes (VIA ACPI fixed)

From: Andrew de Quincey
Date: Fri Sep 05 2003 - 14:01:56 EST

Hi, this is my next round of ACPI IRQ fixes. Attached are patches for linux-2.4.23-pre3 and linux-2.6.0-test4.

Please CC me on any replies. I seem to be having issues with vger.kernel.org right now.


This patch addresses the following issues:

1) ACPI now drops back to PIC mode if configuration in APIC mode fails.

2) Removed 2 lines of erroneous code in mpparse.c which causes IO-APICs to be misconfigured.

3) ACPI now supports PIC controllers properly.

4) This patch includes a patch by "Jun Nakajima" <jun.nakajima@xxxxxxxxx> which fixes ACPI IRQ routing for all
VIA motherboards I have had tested so far. I've included it in this patch as it changes one of the same files.

5) Now retries with an extended IRQ descriptor if programming a link device with a "standard" IRQ descriptor fails.

This has already been tested successfully by multiple people.


Patch for 2.4.23-pre3:


---- BEGIN linux-2.4.23-pre3-acpi-picmode-5.patch ----
--- linux-2.4.23-pre3.orig/arch/i386/kernel/mpparse.c 2003-09-05 18:55:07.000000000 +0100
+++ linux-2.4.23-pre3/arch/i386/kernel/mpparse.c 2003-09-05 18:55:42.309730848 +0100
@@ -1263,10 +1263,11 @@

#ifdef CONFIG_ACPI_PCI

-void __init mp_parse_prt (void)
+int __init mp_parse_prt (void)
{
struct list_head *node = NULL;
struct acpi_prt_entry *entry = NULL;
+ struct acpi_prt_list *prt_list = NULL;
int ioapic = -1;
int ioapic_pin = 0;
int irq = 0;
@@ -1274,16 +1275,31 @@
int edge_level = 0;
int active_high_low = 0;

+ /* Get the current PRT */
+ prt_list = acpi_pci_get_prt_list();
+
+ if (!prt_list->count) {
+ acpi_pci_destroy_prt_list(prt_list);
+ printk(KERN_WARNING "ACPI tables contain no IO-APIC PCI IRQ "
+ "routing entries\n");
+ return_VALUE(-ENODEV);
+ }
+
/*
* Parsing through the PCI Interrupt Routing Table (PRT) and program
* routing for all entries.
*/
- list_for_each(node, &acpi_prt.entries) {
+ list_for_each(node, &prt_list->entries) {
entry = list_entry(node, struct acpi_prt_entry, node);

/* Need to get irq for dynamic entry */
if (entry->link.handle) {
irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index, &edge_level, &active_high_low);
+ if (irq < 0) {
+ acpi_pci_destroy_prt_list(prt_list);
+ return -ENODEV;
+ }
+
if (!irq)
continue;
}
@@ -1334,8 +1350,11 @@
mp_ioapic_routing[ioapic].apic_id, ioapic_pin,
entry->irq);
}
-
- return;
+
+ /* if we get here, the PRT was fine. commit it */
+ acpi_pci_commit_prt_list(prt_list);
+
+ return 0;
}

#endif /*CONFIG_ACPI_PCI*/
--- linux-2.4.23-pre3.orig/arch/i386/kernel/pic.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.23-pre3/arch/i386/kernel/pic.c 2003-09-05 18:55:42.310730696 +0100
@@ -0,0 +1,102 @@
+/* ----------------------------------------------------------------------- *
+ *
+ * Copyright 2003 Andrew de Quincey - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139,
+ * USA; either version 2 of the License, or (at your option) any later
+ * version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/config.h>
+#include <linux/bootmem.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/acpi.h>
+
+#ifdef CONFIG_ACPI_PCI
+
+extern void eisa_set_level_irq(unsigned int irq);
+
+int __init pic_parse_prt (void)
+{
+ struct list_head *node = NULL;
+ struct acpi_prt_entry *entry = NULL;
+ struct acpi_prt_list *prt_list = NULL;
+ int edge_level = 0;
+ int active_high_low = 0;
+ int irq = 0;
+ int programmed[16];
+
+ /* Get the current PRT */
+ prt_list = acpi_pci_get_prt_list();
+
+ if (!prt_list->count) {
+ acpi_pci_destroy_prt_list(prt_list);
+ printk(KERN_WARNING "ACPI tables contain no PIC PCI IRQ "
+ "routing entries\n");
+ return_VALUE(-ENODEV);
+ }
+
+ /* mark all IRQs as unprogrammed */
+ memset(programmed, 0, sizeof(programmed));
+
+ /*
+ * Parsing through the PCI Interrupt Routing Table (PRT) and program
+ * IRQs if necessary.
+ */
+ list_for_each(node, &prt_list->entries) {
+ entry = list_entry(node, struct acpi_prt_entry, node);
+
+ /* Need to get irq for dynamic entry */
+ if (entry->link.handle) {
+ irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index, &edge_level, &active_high_low);
+ if (irq < 0) {
+ acpi_pci_destroy_prt_list(prt_list);
+ return -ENODEV;
+ }
+ if (!irq)
+ continue;
+ }
+
+ /* sanity check + update entry */
+ if ((irq < 0) || (irq > 15)) {
+ printk(KERN_ERR "Invalid IRQ (%i) passed to PIC programming code\n", irq);
+ entry->irq = 0;
+ continue;
+ }
+ entry->irq = irq;
+
+ /* check if it has already been dealt with */
+ if (programmed[irq]) {
+ printk(KERN_DEBUG "PIC: IRQ (%i) already programmed\n", irq);
+ continue;
+ }
+ programmed[irq] = 1;
+
+ /* program it */
+ if (edge_level) {
+ eisa_set_level_irq(irq);
+ }
+
+ printk(KERN_DEBUG "%02x:%02x:%02x[%c] -> IRQ %d Mode %d Trigger %d\n",
+ entry->id.segment, entry->id.bus,
+ entry->id.device, ('A' + entry->pin),
+ entry->irq, edge_level, active_high_low);
+ }
+
+ /* if we get here, the PRT was fine. commit it */
+ acpi_pci_commit_prt_list(prt_list);
+
+ return 0;
+}
+
+#endif /*CONFIG_ACPI_PCI*/
--- linux-2.4.23-pre3.orig/arch/i386/kernel/Makefile 2003-08-25 12:44:39.000000000 +0100
+++ linux-2.4.23-pre3/arch/i386/kernel/Makefile 2003-09-05 18:55:42.311730544 +0100
@@ -36,7 +36,7 @@
obj-$(CONFIG_X86_CPUID) += cpuid.o
obj-$(CONFIG_MICROCODE) += microcode.o
obj-$(CONFIG_APM) += apm.o
-obj-$(CONFIG_ACPI_BOOT) += acpi.o
+obj-$(CONFIG_ACPI_BOOT) += acpi.o pic.o
obj-$(CONFIG_ACPI_SLEEP) += acpi_wakeup.o
obj-$(CONFIG_ACPI_HT_ONLY) += acpitable.o
obj-$(CONFIG_SMP) += smp.o smpboot.o trampoline.o
--- linux-2.4.23-pre3.orig/include/asm-i386/mpspec.h 2003-08-25 12:44:43.000000000 +0100
+++ linux-2.4.23-pre3/include/asm-i386/mpspec.h 2003-09-05 18:55:42.311730544 +0100
@@ -228,7 +228,7 @@
extern void mp_override_legacy_irq (u8 bus_irq, u8 polarity, u8 trigger, u32 global_irq);
extern void mp_config_acpi_legacy_irqs (void);
extern void mp_config_ioapic_for_sci(int irq);
-extern void mp_parse_prt (void);
+extern int mp_parse_prt (void);
#else /*!CONFIG_X86_IO_APIC*/
static inline void mp_config_ioapic_for_sci(int irq) { }
#endif /*!CONFIG_X86_IO_APIC*/
--- linux-2.4.23-pre3.orig/include/asm-i386/acpi.h 2003-08-25 12:44:43.000000000 +0100
+++ linux-2.4.23-pre3/include/asm-i386/acpi.h 2003-09-05 18:55:42.312730392 +0100
@@ -180,6 +180,9 @@
/* early initialization routine */
extern void acpi_reserve_bootmem(void);

+/* ACPI-based PIC initialisation */
+extern int pic_parse_prt (void);
+
#endif /*CONFIG_ACPI_SLEEP*/


--- linux-2.4.23-pre3.orig/arch/x86_64/kernel/mpparse.c 2003-09-05 18:55:07.000000000 +0100
+++ linux-2.4.23-pre3/arch/x86_64/kernel/mpparse.c 2003-09-05 18:58:21.731495056 +0100
@@ -934,6 +934,7 @@
{
struct list_head *node = NULL;
struct acpi_prt_entry *entry = NULL;
+ struct acpi_prt_list *prt_list = NULL;
int vector = 0;
int ioapic = -1;
int ioapic_pin = 0;
@@ -942,16 +943,29 @@
int edge_level = 0;
int active_high_low = 0;

+ /* Get the current PRT */
+ prt_list = acpi_pci_get_prt_list();
+ if (!prt_list->count) {
+ acpi_pci_destroy_prt_list(prt_list);
+ printk(KERN_WARNING "ACPI tables contain no IO-APIC PCI IRQ "
+ "routing entries\n");
+ return_VALUE(-ENODEV);
+ }
+
/*
* Parsing through the PCI Interrupt Routing Table (PRT) and program
* routing for all static (IOAPIC-direct) entries.
*/
- list_for_each(node, &acpi_prt.entries) {
+ list_for_each(node, &prt_list->entries)
entry = list_entry(node, struct acpi_prt_entry, node);

/* Need to get irq for dynamic entry */
if (entry->link.handle) {
irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index, &edge_level, &active_high_low);
+ if (irq < 0) {
+ acpi_pci_destroy_prt_list(prt_list);
+ return -ENODEV;
+ }
if (!irq)
continue;
} else {
@@ -998,8 +1012,11 @@
mp_ioapic_routing[ioapic].apic_id, ioapic_pin, vector,
entry->irq);
}
-
- return;
+
+ /* if we get here, the PRT was fine. commit it */
+ acpi_pci_commit_prt_list(prt_list);
+
+ return 0;
}

#endif /*CONFIG_ACPI_PCI*/
--- linux-2.4.23-pre3.orig/arch/x86_64/kernel/pic.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.23-pre3/arch/x86_64/kernel/pic.c 2003-09-05 18:55:42.315729936 +0100
@@ -0,0 +1,102 @@
+/* ----------------------------------------------------------------------- *
+ *
+ * Copyright 2003 Andrew de Quincey - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139,
+ * USA; either version 2 of the License, or (at your option) any later
+ * version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/config.h>
+#include <linux/bootmem.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/acpi.h>
+
+#ifdef CONFIG_ACPI_PCI
+
+extern void eisa_set_level_irq(unsigned int irq);
+
+int __init pic_parse_prt (void)
+{
+ struct list_head *node = NULL;
+ struct acpi_prt_entry *entry = NULL;
+ struct acpi_prt_list *prt_list = NULL;
+ int edge_level = 0;
+ int active_high_low = 0;
+ int irq = 0;
+ int programmed[16];
+
+ /* Get the current PRT */
+ prt_list = acpi_pci_get_prt_list();
+
+ if (!prt_list->count) {
+ acpi_pci_destroy_prt_list(prt_list);
+ printk(KERN_WARNING "ACPI tables contain no PIC PCI IRQ "
+ "routing entries\n");
+ return_VALUE(-ENODEV);
+ }
+
+ /* mark all IRQs as unprogrammed */
+ memset(programmed, 0, sizeof(programmed));
+
+ /*
+ * Parsing through the PCI Interrupt Routing Table (PRT) and program
+ * IRQs if necessary.
+ */
+ list_for_each(node, &prt_list->entries) {
+ entry = list_entry(node, struct acpi_prt_entry, node);
+
+ /* Need to get irq for dynamic entry */
+ if (entry->link.handle) {
+ irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index, &edge_level, &active_high_low);
+ if (irq < 0) {
+ acpi_pci_destroy_prt_list(prt_list);
+ return -ENODEV;
+ }
+ if (!irq)
+ continue;
+ }
+
+ /* sanity check + update entry */
+ if ((irq < 0) || (irq > 15)) {
+ printk(KERN_ERR "Invalid IRQ (%i) passed to PIC programming code\n", irq);
+ entry->irq = 0;
+ continue;
+ }
+ entry->irq = irq;
+
+ /* check if it has already been dealt with */
+ if (programmed[irq]) {
+ printk(KERN_DEBUG "PIC: IRQ (%i) already programmed\n", irq);
+ continue;
+ }
+ programmed[irq] = 1;
+
+ /* program it */
+ if (edge_level) {
+ eisa_set_level_irq(irq);
+ }
+
+ printk(KERN_DEBUG "%02x:%02x:%02x[%c] -> IRQ %d Mode %d Trigger %d\n",
+ entry->id.segment, entry->id.bus,
+ entry->id.device, ('A' + entry->pin),
+ entry->irq, edge_level, active_high_low);
+ }
+
+ /* if we get here, the PRT was fine. commit it */
+ acpi_pci_commit_prt_list(prt_list);
+
+ return 0;
+}
+
+#endif /*CONFIG_ACPI_PCI*/
--- linux-2.4.23-pre3.orig/arch/x86_64/kernel/Makefile 2003-08-25 12:44:40.000000000 +0100
+++ linux-2.4.23-pre3/arch/x86_64/kernel/Makefile 2003-09-05 18:55:42.315729936 +0100
@@ -37,7 +37,7 @@
obj-$(CONFIG_GART_IOMMU) += pci-gart.o aperture.o
obj-$(CONFIG_DUMMY_IOMMU) += pci-nommu.o
obj-$(CONFIG_MCE) += bluesmoke.o
-obj-$(CONFIG_ACPI) += acpi.o
+obj-$(CONFIG_ACPI) += acpi.o pic.o
obj-$(CONFIG_ACPI_SLEEP) += acpi_wakeup.o suspend.o


--- linux-2.4.23-pre3.orig/include/asm-x86_64/acpi.h 2003-08-25 12:44:44.000000000 +0100
+++ linux-2.4.23-pre3/include/asm-x86_64/acpi.h 2003-09-05 18:55:42.316729784 +0100
@@ -142,6 +142,9 @@

extern void mp_config_ioapic_for_sci(int irq);

+/* ACPI-based PIC initialisation */
+extern int pic_parse_prt (void);
+
#endif /*__KERNEL__*/

#endif /*_ASM_ACPI_H*/
--- linux-2.4.23-pre3.orig/include/asm-ia64/acpi.h 2003-06-13 15:51:38.000000000 +0100
+++ linux-2.4.23-pre3/include/asm-ia64/acpi.h 2003-09-05 18:55:42.316729784 +0100
@@ -109,6 +109,9 @@
#define MAX_PXM_DOMAINS (256)
#endif /* CONFIG_DISCONTIGMEM */

+/* ia64 machines don't have PIC controllers */
+static inline int pic_parse_prt(void) { return -1; }
+
#endif /*__KERNEL__*/

#endif /*_ASM_ACPI_H*/
--- linux-2.4.23-pre3.orig/drivers/acpi/pci_irq.c 2003-08-25 12:44:41.000000000 +0100
+++ linux-2.4.23-pre3/drivers/acpi/pci_irq.c 2003-09-05 18:55:42.317729632 +0100
@@ -50,7 +50,22 @@

#define PREFIX "PCI: "

-struct acpi_prt_list acpi_prt;
+struct acpi_prt_list* acpi_prt = NULL;
+
+struct acpi_prt_ref {
+ struct list_head node;
+ struct acpi_device *device;
+ acpi_handle handle;
+ int segment;
+ int bus;
+};
+
+struct acpi_prt_ref_list {
+ int count;
+ struct list_head entries;
+};
+
+struct acpi_prt_ref_list acpi_prt_ref_list;

#ifdef CONFIG_X86
extern void eisa_set_level_irq(unsigned int irq);
@@ -73,13 +88,19 @@

ACPI_FUNCTION_TRACE("acpi_pci_irq_find_prt_entry");

+ /* ensure we're not called before the routing table has been determined */
+ if (acpi_prt == NULL) {
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Called before acpi_prt determined"));
+ return_PTR(NULL);
+ }
+
/*
* Parse through all PRT entries looking for a match on the specified
* PCI device's segment, bus, device, and pin (don't care about func).
*
* TBD: Acquire/release lock
*/
- list_for_each(node, &acpi_prt.entries) {
+ list_for_each(node, &acpi_prt->entries) {
entry = list_entry(node, struct acpi_prt_entry, node);
if ((segment == entry->id.segment)
&& (bus == entry->id.bus)
@@ -95,6 +116,7 @@

static int
acpi_pci_irq_add_entry (
+ struct acpi_prt_list* prt_list,
acpi_handle handle,
int segment,
int bus,
@@ -151,12 +173,115 @@
('A' + entry->pin), prt->source, entry->link.index));

/* TBD: Acquire/release lock */
- list_add_tail(&entry->node, &acpi_prt.entries);
- acpi_prt.count++;
+ list_add_tail(&entry->node, &prt_list->entries);
+ prt_list->count++;

return_VALUE(0);
}

+struct acpi_prt_list*
+acpi_pci_get_prt_list (void)
+{
+ acpi_status status = AE_OK;
+ struct acpi_buffer buffer = {0, NULL};
+ struct acpi_pci_routing_table *prt = NULL;
+ struct acpi_pci_routing_table *entry = NULL;
+ struct acpi_prt_list *prt_list = NULL;
+ struct acpi_prt_ref *prt_ref_entry = NULL;
+ struct list_head *node = NULL;
+
+ ACPI_FUNCTION_TRACE("acpi_pci_irq_get_prt_list");
+
+ /* Create a brand new acpi_prt_list */
+ prt_list = kmalloc(sizeof(struct acpi_prt_list), GFP_KERNEL);
+ if (!prt_list)
+ return_PTR(NULL);
+ memset(prt_list, 0, sizeof(struct acpi_prt_list));
+
+ prt_list->count = 0;
+ INIT_LIST_HEAD(&prt_list->entries);
+
+ /* iterate over all entries in acpi_prt_ref_list, extracting the current _PRT entries */
+ list_for_each(node, &acpi_prt_ref_list.entries) {
+ prt_ref_entry = list_entry(node, struct acpi_prt_ref, node);
+
+ /*
+ * Evaluate this _PRT and add its entries to our local list (prt_list).
+ */
+
+ buffer.length = 0;
+ buffer.pointer = NULL;
+ status = acpi_get_irq_routing_table(prt_ref_entry->handle, &buffer);
+ if (status != AE_BUFFER_OVERFLOW) {
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRT [%s]\n",
+ acpi_format_exception(status)));
+ kfree(prt_list);
+ return_PTR(NULL);
+ }
+
+ prt = kmalloc(buffer.length, GFP_KERNEL);
+ if (!prt) {
+ kfree(prt_list);
+ return_VALUE(NULL);
+ }
+ memset(prt, 0, buffer.length);
+ buffer.pointer = prt;
+
+ status = acpi_get_irq_routing_table(prt_ref_entry->handle, &buffer);
+ if (ACPI_FAILURE(status)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRT [%s]\n",
+ acpi_format_exception(status)));
+ kfree(buffer.pointer);
+ kfree(prt_list);
+ return_PTR(NULL);
+ }
+
+ entry = prt;
+
+ while (entry && (entry->length > 0)) {
+ acpi_pci_irq_add_entry(prt_list, prt_ref_entry->handle, prt_ref_entry->segment,
+ prt_ref_entry->bus, entry);
+ entry = (struct acpi_pci_routing_table *)
+ ((unsigned long) entry + entry->length);
+ }
+
+ kfree(prt);
+ }
+
+ return_PTR(prt_list);
+}
+
+int
+acpi_pci_destroy_prt_list (struct acpi_prt_list* prt_list) {
+ struct list_head *node = NULL;
+ struct list_head *tmp = NULL;
+ struct acpi_prt_entry *entry = NULL;
+
+ ACPI_FUNCTION_TRACE("acpi_pci_irq_destroy_prt_list");
+
+ list_for_each_safe(node, tmp, &prt_list->entries) {
+ entry = list_entry(node, struct acpi_prt_entry, node);
+ list_del(node);
+ kfree(entry);
+ }
+ kfree(prt_list);
+
+ return_VALUE(0);
+}
+
+int
+acpi_pci_commit_prt_list (struct acpi_prt_list* prt_list) {
+
+ ACPI_FUNCTION_TRACE("acpi_pci_irq_commit_prt_list");
+
+ if (acpi_prt != NULL) {
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Attempt to commit acpi_prt twice\n"));
+ return_VALUE(-ENODEV);
+ }
+
+ acpi_prt = prt_list;
+ return_VALUE(0);
+}

int
acpi_pci_irq_add_prt (
@@ -164,21 +289,20 @@
int segment,
int bus)
{
- acpi_status status = AE_OK;
- char pathname[ACPI_PATHNAME_MAX] = {0};
- struct acpi_buffer buffer = {0, NULL};
- struct acpi_pci_routing_table *prt = NULL;
- struct acpi_pci_routing_table *entry = NULL;
- static int first_time = 1;
+ static int first_time = 1;
+ struct acpi_prt_ref *entry = NULL;
+ struct acpi_buffer buffer = {0, NULL};
+ char pathname[ACPI_PATHNAME_MAX] = {0};

ACPI_FUNCTION_TRACE("acpi_pci_irq_add_prt");

if (first_time) {
- acpi_prt.count = 0;
- INIT_LIST_HEAD(&acpi_prt.entries);
+ acpi_prt_ref_list.count = 0;
+ INIT_LIST_HEAD(&acpi_prt_ref_list.entries);
first_time = 0;
}

+
/*
* NOTE: We're given a 'handle' to the _PRT object's parent device
* (either a PCI root bridge or PCI-PCI bridge).
@@ -191,42 +315,19 @@
printk(KERN_DEBUG "ACPI: PCI Interrupt Routing Table [%s._PRT]\n",
pathname);

- /*
- * Evaluate this _PRT and add its entries to our global list (acpi_prt).
- */
-
- buffer.length = 0;
- buffer.pointer = NULL;
- status = acpi_get_irq_routing_table(handle, &buffer);
- if (status != AE_BUFFER_OVERFLOW) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRT [%s]\n",
- acpi_format_exception(status)));
- return_VALUE(-ENODEV);
- }
-
- prt = kmalloc(buffer.length, GFP_KERNEL);
- if (!prt)
+
+
+ entry = kmalloc(sizeof(struct acpi_prt_ref), GFP_KERNEL);
+ if (!entry)
return_VALUE(-ENOMEM);
- memset(prt, 0, buffer.length);
- buffer.pointer = prt;
-
- status = acpi_get_irq_routing_table(handle, &buffer);
- if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRT [%s]\n",
- acpi_format_exception(status)));
- kfree(buffer.pointer);
- return_VALUE(-ENODEV);
- }
+ memset(entry, 0, sizeof(struct acpi_prt_ref));
+
+ entry->handle = handle;
+ entry->segment = segment;
+ entry->bus = bus;

- entry = prt;
-
- while (entry && (entry->length > 0)) {
- acpi_pci_irq_add_entry(handle, segment, bus, entry);
- entry = (struct acpi_pci_routing_table *)
- ((unsigned long) entry + entry->length);
- }
-
- kfree(prt);
+ list_add_tail(&entry->node, &acpi_prt_ref_list.entries);
+ acpi_prt_ref_list.count++;

return_VALUE(0);
}
@@ -387,6 +488,15 @@
}


+static void __init acpi_irq_pic_mode(void)
+{
+ acpi_irq_model = ACPI_IRQ_MODEL_PIC;
+ acpi_bus_init_irq();
+
+ /* recalculate penalties */
+ acpi_pci_link_calc_penalties();
+}
+
int __init
acpi_pci_irq_init (void)
{
@@ -394,26 +504,25 @@

ACPI_FUNCTION_TRACE("acpi_pci_irq_init");

- if (!acpi_prt.count) {
- printk(KERN_WARNING PREFIX "ACPI tables contain no PCI IRQ "
- "routing entries\n");
- return_VALUE(-ENODEV);
- }
-
- /* Make sure all link devices have a valid IRQ. */
- if (acpi_pci_link_check()) {
- return_VALUE(-ENODEV);
- }
+ /* Calculate IRQ penalties for each link device */
+ acpi_pci_link_calc_penalties();

#ifdef CONFIG_X86_IO_APIC
/* Program IOAPICs using data from PRT entries. */
if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC)
- mp_parse_prt();
+ if (mp_parse_prt())
+ acpi_irq_pic_mode();
#endif
#ifdef CONFIG_IOSAPIC
if (acpi_irq_model == ACPI_IRQ_MODEL_IOSAPIC)
- iosapic_parse_prt();
+ if (iosapic_parse_prt())
+ return_VALUE(-ENODEV);
#endif
+
+ /* This one is last, as a catchall */
+ if (acpi_irq_model == ACPI_IRQ_MODEL_PIC)
+ if (pic_parse_prt())
+ return_VALUE(-ENODEV);

pci_for_each_dev(dev)
acpi_pci_irq_enable(dev);
--- linux-2.4.23-pre3.orig/drivers/acpi/pci_link.c 2003-08-25 12:44:41.000000000 +0100
+++ linux-2.4.23-pre3/drivers/acpi/pci_link.c 2003-09-05 18:55:42.318729480 +0100
@@ -277,6 +277,32 @@


static int
+acpi_pci_link_try_get_current (
+ struct acpi_pci_link *link,
+ int irq)
+{
+ int result;
+
+ ACPI_FUNCTION_TRACE("acpi_pci_link_try_get_current");
+
+ result = acpi_pci_link_get_current(link);
+ if (result && link->irq.active)
+ {
+ return_VALUE(result);
+ }
+
+ if (!link->irq.active)
+ {
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "No active IRQ resource found\n"));
+ printk(KERN_WARNING "_CRS returns NULL! Using IRQ %d for device (%s [%s]).\n", irq, acpi_device_name(link->device), acpi_device_bid(link->device));
+ link->irq.active = irq;
+ }
+
+ return 0;
+}
+
+
+static int
acpi_pci_link_set (
struct acpi_pci_link *link,
int irq)
@@ -290,7 +316,8 @@
struct acpi_buffer buffer = {sizeof(resource)+1, &resource};
int i = 0;
int valid = 0;
-
+ int resource_type = 0;
+
ACPI_FUNCTION_TRACE("acpi_pci_link_set");

if (!link || !irq)
@@ -313,12 +340,23 @@
}
}

+ /* If IRQ<=15, first try with a "normal" IRQ descriptor. If that fails, try with
+ * an extended one */
+ if (irq <= 15) {
+ resource_type = ACPI_RSTYPE_IRQ;
+ } else {
+ resource_type = ACPI_RSTYPE_EXT_IRQ;
+ }
+
+retry_programming:
+
memset(&resource, 0, sizeof(resource));

/* NOTE: PCI interrupts are always level / active_low / shared. But not all
interrupts > 15 are PCI interrupts. Rely on the ACPI IRQ definition for
parameters */
- if (irq <= 15) {
+ switch(resource_type) {
+ case ACPI_RSTYPE_IRQ:
resource.res.id = ACPI_RSTYPE_IRQ;
resource.res.length = sizeof(struct acpi_resource);
resource.res.data.irq.edge_level = link->irq.edge_level;
@@ -326,8 +364,9 @@
resource.res.data.irq.shared_exclusive = ACPI_SHARED;
resource.res.data.irq.number_of_interrupts = 1;
resource.res.data.irq.interrupts[0] = irq;
- }
- else {
+ break;
+
+ case ACPI_RSTYPE_EXT_IRQ:
resource.res.id = ACPI_RSTYPE_EXT_IRQ;
resource.res.length = sizeof(struct acpi_resource);
resource.res.data.extended_irq.producer_consumer = ACPI_CONSUMER;
@@ -337,11 +376,22 @@
resource.res.data.extended_irq.number_of_interrupts = 1;
resource.res.data.extended_irq.interrupts[0] = irq;
/* ignore resource_source, it's optional */
+ break;
}
resource.end.id = ACPI_RSTYPE_END_TAG;

/* Attempt to set the resource */
status = acpi_set_current_resources(link->handle, &buffer);
+
+
+ /* if we failed and IRQ <= 15, try again with an extended descriptor */
+ if (ACPI_FAILURE(status) && (resource_type == ACPI_RSTYPE_IRQ)) {
+ resource_type = ACPI_RSTYPE_EXT_IRQ;
+ printk(PREFIX "Retrying with extended IRQ descriptor\n");
+ goto retry_programming;
+ }
+
+ /* check for total failure */
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _SRS\n"));
return_VALUE(-ENODEV);
@@ -359,11 +409,11 @@
}

/* Make sure the active IRQ is the one we requested. */
- result = acpi_pci_link_get_current(link);
+ result = acpi_pci_link_try_get_current(link, irq);
if (result) {
return_VALUE(result);
}
-
+
if (link->irq.active != irq) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Attempt to enable at IRQ %d resulted in IRQ %d\n",
@@ -399,23 +449,26 @@
* as 'best bets' for PCI use.
*/

-static int acpi_irq_penalty[ACPI_MAX_IRQS] = {
+static int acpi_irq_default_penalty[ACPI_MAX_IRQS] = {
1000000, 1000000, 1000000, 10000,
10000, 0, 10000, 10000,
10000, 0, 0, 0,
10000, 100000, 100000, 100000,
};

+static int acpi_irq_penalty[ACPI_MAX_IRQS] = { 0 };

int
-acpi_pci_link_check (void)
+acpi_pci_link_calc_penalties (void)
{
struct list_head *node = NULL;
struct acpi_pci_link *link = NULL;
int i = 0;

- ACPI_FUNCTION_TRACE("acpi_pci_link_check");
+ ACPI_FUNCTION_TRACE("acpi_pci_calc_penalties");

+ memcpy(&acpi_irq_penalty, &acpi_irq_default_penalty, sizeof(acpi_irq_default_penalty));
+
/*
* Update penalties to facilitate IRQ balancing.
*/
@@ -426,7 +479,8 @@
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
continue;
}
-
+ link->irq.setonboot = 0;
+
if (link->irq.active)
acpi_irq_penalty[link->irq.active] += 100;
else if (link->irq.possible_count) {
@@ -456,18 +510,18 @@
irq = link->irq.possible[0];
}

- /*
- * Select the best IRQ. This is done in reverse to promote
- * the use of IRQs 9, 10, 11, and >15.
- */
- for (i=(link->irq.possible_count-1); i>0; i--) {
- if (acpi_irq_penalty[irq] > acpi_irq_penalty[link->irq.possible[i]])
- irq = link->irq.possible[i];
- }
+ /*
+ * Select the best IRQ. This is done in reverse to promote
+ * the use of IRQs 9, 10, 11, and >15.
+ */
+ for (i=(link->irq.possible_count-1); i>0; i--) {
+ if (acpi_irq_penalty[irq] > acpi_irq_penalty[link->irq.possible[i]])
+ irq = link->irq.possible[i];
+ }

/* Attempt to enable the link device at this IRQ. */
if (acpi_pci_link_set(link, irq)) {
- printk(PREFIX "Unable to set IRQ for %s [%s] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off\n",
+ printk(PREFIX "Unable to set IRQ for %s [%s] (likely buggy ACPI BIOS, please report to acpi-devel!)\n",
acpi_device_name(link->device),
acpi_device_bid(link->device));
return_VALUE(-ENODEV);
@@ -573,10 +627,6 @@
else
printk(" %d", link->irq.possible[i]);
}
- if (!link->irq.active)
- printk(", disabled");
- else if (!found)
- printk(", enabled at IRQ %d", link->irq.active);
printk(")\n");

/* TBD: Acquire/release lock */
--- linux-2.4.23-pre3.orig/drivers/acpi/bus.c 2003-08-25 12:44:41.000000000 +0100
+++ linux-2.4.23-pre3/drivers/acpi/bus.c 2003-09-05 18:55:42.319729328 +0100
@@ -1802,7 +1802,7 @@
Initialization/Cleanup
-------------------------------------------------------------------------- */

-static int __init
+int
acpi_bus_init_irq (void)
{
acpi_status status = AE_OK;
--- linux-2.4.23-pre3.orig/include/acpi/acpi_drivers.h 2003-08-25 12:44:43.000000000 +0100
+++ linux-2.4.23-pre3/include/acpi/acpi_drivers.h 2003-09-05 18:55:42.320729176 +0100
@@ -26,6 +26,9 @@
#ifndef __ACPI_DRIVERS_H__
#define __ACPI_DRIVERS_H__

+/* forward definitions */
+struct acpi_prt_list;
+
#include <linux/acpi.h>
#include "acpi_bus.h"

@@ -173,7 +176,7 @@
#define ACPI_PCI_LINK_FILE_INFO "info"
#define ACPI_PCI_LINK_FILE_STATUS "state"

-int acpi_pci_link_check (void);
+int acpi_pci_link_calc_penalties (void);
int acpi_pci_link_get_irq (acpi_handle handle, int index, int* edge_level, int* active_high_low);
int acpi_pci_link_init (void);
void acpi_pci_link_exit (void);
@@ -181,6 +184,9 @@
/* ACPI PCI Interrupt Routing (pci_irq.c) */

int acpi_pci_irq_add_prt (acpi_handle handle, int segment, int bus);
+int acpi_pci_commit_prt_list (struct acpi_prt_list* prt_list);
+int acpi_pci_destroy_prt_list (struct acpi_prt_list* prt_list);
+struct acpi_prt_list* acpi_pci_get_prt_list (void);

/* ACPI PCI Device Binding (pci_bind.c) */

--- linux-2.4.23-pre3.orig/include/linux/acpi.h 2003-08-25 12:44:44.000000000 +0100
+++ linux-2.4.23-pre3/include/linux/acpi.h 2003-09-05 18:55:42.321729024 +0100
@@ -401,7 +401,7 @@
struct list_head entries;
};

-extern struct acpi_prt_list acpi_prt;
+extern struct acpi_prt_list* acpi_prt;

struct pci_dev;

--- linux-2.4.23-pre3.orig/include/acpi/acpi_bus.h 2003-08-25 12:44:43.000000000 +0100
+++ linux-2.4.23-pre3/include/acpi/acpi_bus.h 2003-09-05 18:55:42.322728872 +0100
@@ -309,6 +309,7 @@
int acpi_init (void);
void acpi_exit (void);

+int acpi_bus_init_irq (void);

#endif /*CONFIG_ACPI_BUS*/

---- END linux-2.4.23-pre3-acpi-picmode-5.patch ----




Here is the patch for 2.6.0-test4:




---- BEGIN linux-2.6.0-test4-acpi-picmode-5.patch ----
--- linux-2.6.0-test4.orig/arch/i386/kernel/mpparse.c 2003-08-23 00:53:52.000000000 +0100
+++ linux-2.6.0-test4/arch/i386/kernel/mpparse.c 2003-08-30 23:16:07.000000000 +0100
@@ -1073,10 +1073,11 @@

#ifdef CONFIG_ACPI_PCI

-void __init mp_parse_prt (void)
+int __init mp_parse_prt (void)
{
struct list_head *node = NULL;
struct acpi_prt_entry *entry = NULL;
+ struct acpi_prt_list *prt_list = NULL;
int ioapic = -1;
int ioapic_pin = 0;
int irq = 0;
@@ -1084,16 +1085,31 @@
int edge_level = 0;
int active_high_low = 0;

+ /* Get the current PRT */
+ prt_list = acpi_pci_get_prt_list();
+
+ if (!prt_list->count) {
+ acpi_pci_destroy_prt_list(prt_list);
+ printk(KERN_WARNING PREFIX "ACPI tables contain no IO-APIC PCI IRQ "
+ "routing entries\n");
+ return_VALUE(-ENODEV);
+ }
+
/*
* Parsing through the PCI Interrupt Routing Table (PRT) and program
* routing for all entries.
*/
- list_for_each(node, &acpi_prt.entries) {
+ list_for_each(node, &prt_list->entries) {
entry = list_entry(node, struct acpi_prt_entry, node);

/* Need to get irq for dynamic entry */
if (entry->link.handle) {
irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index, &edge_level, &active_high_low);
+ if (irq < 0) {
+ acpi_pci_destroy_prt_list(prt_list);
+ return -ENODEV;
+ }
+
if (!irq)
continue;
}
@@ -1113,8 +1129,6 @@
continue;
ioapic_pin = irq - mp_ioapic_routing[ioapic].irq_start;

- if (!ioapic && (irq < 16))
- irq += 16;
/*
* Avoid pin reprogramming. PRTs typically include entries
* with redundant pin->irq mappings (but unique PCI devices);
@@ -1146,6 +1160,11 @@
mp_ioapic_routing[ioapic].apic_id, ioapic_pin,
entry->irq);
}
+
+ /* if we get here, the PRT was fine. commit it */
+ acpi_pci_commit_prt_list(prt_list);
+
+ return 0;
}

#endif /*CONFIG_ACPI_PCI*/
--- linux-2.6.0-test4.orig/arch/i386/kernel/acpi/pic.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.0-test4/arch/i386/kernel/acpi/pic.c 2003-08-30 23:25:01.000000000 +0100
@@ -0,0 +1,102 @@
+/* ----------------------------------------------------------------------- *
+ *
+ * Copyright 2003 Andrew de Quincey - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139,
+ * USA; either version 2 of the License, or (at your option) any later
+ * version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/config.h>
+#include <linux/bootmem.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/acpi.h>
+
+#ifdef CONFIG_ACPI_PCI
+
+extern void eisa_set_level_irq(unsigned int irq);
+
+int __init pic_parse_prt (void)
+{
+ struct list_head *node = NULL;
+ struct acpi_prt_entry *entry = NULL;
+ struct acpi_prt_list *prt_list = NULL;
+ int edge_level = 0;
+ int active_high_low = 0;
+ int irq = 0;
+ int programmed[16];
+
+ /* Get the current PRT */
+ prt_list = acpi_pci_get_prt_list();
+
+ if (!prt_list->count) {
+ acpi_pci_destroy_prt_list(prt_list);
+ printk(KERN_WARNING PREFIX "ACPI tables contain no PIC PCI IRQ "
+ "routing entries\n");
+ return_VALUE(-ENODEV);
+ }
+
+ /* mark all IRQs as unprogrammed */
+ memset(programmed, 0, sizeof(programmed));
+
+ /*
+ * Parsing through the PCI Interrupt Routing Table (PRT) and program
+ * IRQs if necessary.
+ */
+ list_for_each(node, &prt_list->entries) {
+ entry = list_entry(node, struct acpi_prt_entry, node);
+
+ /* Need to get irq for dynamic entry */
+ if (entry->link.handle) {
+ irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index, &edge_level, &active_high_low);
+ if (irq < 0) {
+ acpi_pci_destroy_prt_list(prt_list);
+ return -ENODEV;
+ }
+ if (!irq)
+ continue;
+ }
+
+ /* sanity check + update entry */
+ if ((irq < 0) || (irq > 15)) {
+ printk(KERN_ERR "Invalid IRQ (%i) passed to PIC programming code\n", irq);
+ entry->irq = 0;
+ continue;
+ }
+ entry->irq = irq;
+
+ /* check if it has already been dealt with */
+ if (programmed[irq]) {
+ printk(KERN_DEBUG "PIC: IRQ (%i) already programmed\n", irq);
+ continue;
+ }
+ programmed[irq] = 1;
+
+ /* program it */
+ if (edge_level) {
+ eisa_set_level_irq(irq);
+ }
+
+ printk(KERN_DEBUG "%02x:%02x:%02x[%c] -> IRQ %d Mode %d Trigger %d\n",
+ entry->id.segment, entry->id.bus,
+ entry->id.device, ('A' + entry->pin),
+ entry->irq, edge_level, active_high_low);
+ }
+
+ /* if we get here, the PRT was fine. commit it */
+ acpi_pci_commit_prt_list(prt_list);
+
+ return 0;
+}
+
+#endif /*CONFIG_ACPI_PCI*/
--- linux-2.6.0-test4.orig/arch/i386/kernel/acpi/Makefile 2003-08-23 00:55:40.000000000 +0100
+++ linux-2.6.0-test4/arch/i386/kernel/acpi/Makefile 2003-08-30 23:25:30.000000000 +0100
@@ -1,3 +1,3 @@
-obj-$(CONFIG_ACPI_BOOT) := boot.o
+obj-$(CONFIG_ACPI_BOOT) := boot.o pic.o
obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o

--- linux-2.6.0-test4.orig/include/asm-i386/mpspec.h 2003-08-23 00:50:21.000000000 +0100
+++ linux-2.6.0-test4/include/asm-i386/mpspec.h 2003-08-30 23:12:41.000000000 +0100
@@ -37,7 +37,7 @@
extern void mp_register_ioapic (u8 id, u32 address, u32 irq_base);
extern void mp_override_legacy_irq (u8 bus_irq, u8 polarity, u8 trigger, u32 global_irq);
extern void mp_config_acpi_legacy_irqs (void);
-extern void mp_parse_prt (void);
+extern int mp_parse_prt (void);

#ifdef CONFIG_X86_IO_APIC
extern void mp_config_ioapic_for_sci(int irq);
--- linux-2.6.0-test4.orig/include/asm-i386/acpi.h 2003-08-23 00:59:31.000000000 +0100
+++ linux-2.6.0-test4/include/asm-i386/acpi.h 2003-08-30 23:27:35.000000000 +0100
@@ -151,6 +151,9 @@
/* early initialization routine */
extern void acpi_reserve_bootmem(void);

+/* ACPI-based PIC initialisation */
+extern int pic_parse_prt (void);
+
#endif /*CONFIG_ACPI_SLEEP*/

#endif /*__KERNEL__*/
--- linux-2.6.0-test4.orig/arch/x86_64/kernel/mpparse.c 2003-08-23 00:53:53.000000000 +0100
+++ linux-2.6.0-test4/arch/x86_64/kernel/mpparse.c 2003-08-31 01:08:55.000000000 +0100
@@ -889,16 +889,31 @@
int edge_level = 0;
int active_high_low = 0;

+ /* Get the current PRT */
+ prt_list = acpi_pci_get_prt_list();
+
+ if (!prt_list->count) {
+ acpi_pci_destroy_prt_list(prt_list);
+ printk(KERN_WARNING PREFIX "ACPI tables contain no IO-APIC PCI IRQ "
+ "routing entries\n");
+ return_VALUE(-ENODEV);
+ }
+
/*
* Parsing through the PCI Interrupt Routing Table (PRT) and program
* routing for all static (IOAPIC-direct) entries.
*/
- list_for_each(node, &acpi_prt.entries) {
+ list_for_each(node, &acpi_prt->entries) {
entry = list_entry(node, struct acpi_prt_entry, node);

/* Need to get irq for dynamic entry */
if (entry->link.handle) {
irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index, &edge_level, &active_high_low);
+ if (irq < 0) {
+ acpi_pci_destroy_prt_list(prt_list);
+ return -ENODEV;
+ }
+
if (!irq)
continue;
} else {
@@ -949,8 +964,11 @@
mp_ioapic_routing[ioapic].apic_id, ioapic_pin, vector,
entry->irq);
}
+
+ /* if we get here, the PRT was fine. commit it */
+ acpi_pci_commit_prt_list(prt_list);

- return;
+ return 0;
}

#endif /*CONFIG_ACPI_PCI*/
--- linux-2.6.0-test4.orig/arch/x86_64/kernel/acpi/pic.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.0-test4/arch/x86_64/kernel/acpi/pic.c 2003-08-31 00:16:21.000000000 +0100
@@ -0,0 +1,102 @@
+/* ----------------------------------------------------------------------- *
+ *
+ * Copyright 2003 Andrew de Quincey - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139,
+ * USA; either version 2 of the License, or (at your option) any later
+ * version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/config.h>
+#include <linux/bootmem.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/acpi.h>
+
+#ifdef CONFIG_ACPI_PCI
+
+extern void eisa_set_level_irq(unsigned int irq);
+
+int __init pic_parse_prt (void)
+{
+ struct list_head *node = NULL;
+ struct acpi_prt_entry *entry = NULL;
+ struct acpi_prt_list *prt_list = NULL;
+ int edge_level = 0;
+ int active_high_low = 0;
+ int irq = 0;
+ int programmed[16];
+
+ /* Get the current PRT */
+ prt_list = acpi_pci_get_prt_list();
+
+ if (!prt_list->count) {
+ acpi_pci_destroy_prt_list(prt_list);
+ printk(KERN_WARNING PREFIX "ACPI tables contain no PIC PCI IRQ "
+ "routing entries\n");
+ return_VALUE(-ENODEV);
+ }
+
+ /* mark all IRQs as unprogrammed */
+ memset(programmed, 0, sizeof(programmed));
+
+ /*
+ * Parsing through the PCI Interrupt Routing Table (PRT) and program
+ * IRQs if necessary.
+ */
+ list_for_each(node, &prt_list->entries) {
+ entry = list_entry(node, struct acpi_prt_entry, node);
+
+ /* Need to get irq for dynamic entry */
+ if (entry->link.handle) {
+ irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index, &edge_level, &active_high_low);
+ if (irq < 0) {
+ acpi_pci_destroy_prt_list(prt_list);
+ return -ENODEV;
+ }
+ if (!irq)
+ continue;
+ }
+
+ /* sanity check + update entry */
+ if ((irq < 0) || (irq > 15)) {
+ printk(KERN_ERR "Invalid IRQ (%i) passed to PIC programming code\n", irq);
+ entry->irq = 0;
+ continue;
+ }
+ entry->irq = irq;
+
+ /* check if it has already been dealt with */
+ if (programmed[irq]) {
+ printk(KERN_DEBUG "PIC: IRQ (%i) already programmed\n", irq);
+ continue;
+ }
+ programmed[irq] = 1;
+
+ /* program it */
+ if (edge_level) {
+ eisa_set_level_irq(irq);
+ }
+
+ printk(KERN_DEBUG "%02x:%02x:%02x[%c] -> IRQ %d Mode %d Trigger %d\n",
+ entry->id.segment, entry->id.bus,
+ entry->id.device, ('A' + entry->pin),
+ entry->irq, edge_level, active_high_low);
+ }
+
+ /* if we get here, the PRT was fine. commit it */
+ acpi_pci_commit_prt_list(prt_list);
+
+ return 0;
+}
+
+#endif /*CONFIG_ACPI_PCI*/
--- linux-2.6.0-test4.orig/arch/x86_64/kernel/acpi/Makefile 2003-08-23 00:56:20.000000000 +0100
+++ linux-2.6.0-test4/arch/x86_64/kernel/acpi/Makefile 2003-08-31 00:16:26.000000000 +0100
@@ -1,3 +1,3 @@
-obj-$(CONFIG_ACPI_BOOT) := boot.o
+obj-$(CONFIG_ACPI_BOOT) := boot.o pic.o
obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o

--- linux-2.6.0-test4.orig/include/asm-x86_64/mpspec.h 2003-08-23 00:55:14.000000000 +0100
+++ linux-2.6.0-test4/include/asm-x86_64/mpspec.h 2003-08-31 00:15:38.000000000 +0100
@@ -190,7 +190,7 @@
extern void mp_register_ioapic (u8 id, u32 address, u32 irq_base);
extern void mp_override_legacy_irq (u8 bus_irq, u8 polarity, u8 trigger, u32 global_irq);
extern void mp_config_acpi_legacy_irqs (void);
-extern void mp_parse_prt (void);
+extern int mp_parse_prt (void);
#endif /*CONFIG_X86_IO_APIC*/
#endif

--- linux-2.6.0-test4.orig/include/asm-x86_64/acpi.h 2003-08-23 00:57:46.000000000 +0100
+++ linux-2.6.0-test4/include/asm-x86_64/acpi.h 2003-08-31 00:57:15.000000000 +0100
@@ -146,6 +146,9 @@
#define BROKEN_ACPI_Sx 0x0001
#define BROKEN_INIT_AFTER_S1 0x0002

+/* ACPI-based PIC initialisation */
+extern int pic_parse_prt (void);
+
#endif /*__KERNEL__*/

#endif /*_ASM_ACPI_H*/
--- linux-2.6.0-test4.orig/arch/ia64/kernel/iosapic.c 2003-08-23 00:55:37.000000000 +0100
+++ linux-2.6.0-test4/arch/ia64/kernel/iosapic.c 2003-08-31 00:59:55.000000000 +0100
@@ -680,7 +680,7 @@

#ifdef CONFIG_ACPI_PCI

-void __init
+int __init
iosapic_parse_prt (void)
{
struct acpi_prt_entry *entry;
@@ -690,8 +690,19 @@
char pci_id[16];
struct hw_interrupt_type *irq_type = &irq_type_iosapic_level;
irq_desc_t *idesc;
+ struct acpi_prt_list *prt_list = NULL;

- list_for_each(node, &acpi_prt.entries) {
+ /* Get the current PRT */
+ prt_list = acpi_pci_get_prt_list();
+
+ if (!prt_list->count) {
+ acpi_pci_destroy_prt_list(prt_list);
+ printk(KERN_WARNING PREFIX "ACPI tables contain no IO-APIC PCI IRQ "
+ "routing entries\n");
+ return_VALUE(-ENODEV);
+ }
+
+ list_for_each(node, &prt_list->entries) {
entry = list_entry(node, struct acpi_prt_entry, node);

/* We're only interested in static (non-link) entries. */
@@ -729,6 +740,10 @@
IOSAPIC_LEVEL);

}
+
+ /* if we get here, the PRT was fine. commit it */
+ acpi_pci_commit_prt_list(prt_list);
+ return 0;
}

#endif /* CONFIG_ACPI */
--- linux-2.6.0-test4.orig/include/asm-ia64/iosapic.h 2003-08-23 00:56:34.000000000 +0100
+++ linux-2.6.0-test4/include/asm-ia64/iosapic.h 2003-08-31 00:53:24.000000000 +0100
@@ -57,7 +57,7 @@
unsigned int gsi_base);
extern int gsi_to_vector (unsigned int gsi);
extern int gsi_to_irq (unsigned int gsi);
-extern void __init iosapic_parse_prt (void);
+extern int __init iosapic_parse_prt (void);
extern void iosapic_enable_intr (unsigned int vector);
extern int iosapic_register_intr (unsigned int gsi, unsigned long polarity,
unsigned long trigger);
--- linux-2.6.0-test4.orig/include/asm-ia64/acpi.h 2003-08-23 00:59:27.000000000 +0100
+++ linux-2.6.0-test4/include/asm-ia64/acpi.h 2003-09-01 17:01:41.000000000 +0100
@@ -112,6 +112,9 @@
extern int __initdata nid_to_pxm_map[NR_NODES];
#endif

+/* ia64 machines don't have PIC controllers */
+static inline int pic_parse_prt(void) { return -1; }
+
#endif /*__KERNEL__*/

#endif /*_ASM_ACPI_H*/
--- linux-2.6.0-test4.orig/drivers/acpi/pci_irq.c 2003-08-23 00:55:13.000000000 +0100
+++ linux-2.6.0-test4/drivers/acpi/pci_irq.c 2003-09-03 23:21:04.000000000 +0100
@@ -48,7 +48,22 @@
#define _COMPONENT ACPI_PCI_COMPONENT
ACPI_MODULE_NAME ("pci_irq")

-struct acpi_prt_list acpi_prt;
+struct acpi_prt_list* acpi_prt = NULL;
+
+struct acpi_prt_ref {
+ struct list_head node;
+ struct acpi_device *device;
+ acpi_handle handle;
+ int segment;
+ int bus;
+};
+
+struct acpi_prt_ref_list {
+ int count;
+ struct list_head entries;
+};
+
+struct acpi_prt_ref_list acpi_prt_ref_list;

#ifdef CONFIG_X86
extern void eisa_set_level_irq(unsigned int irq);
@@ -71,13 +86,19 @@

ACPI_FUNCTION_TRACE("acpi_pci_irq_find_prt_entry");

+ /* ensure we're not called before the routing table has been determined */
+ if (acpi_prt == NULL) {
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Called before acpi_prt determined"));
+ return_PTR(NULL);
+ }
+
/*
* Parse through all PRT entries looking for a match on the specified
* PCI device's segment, bus, device, and pin (don't care about func).
*
* TBD: Acquire/release lock
*/
- list_for_each(node, &acpi_prt.entries) {
+ list_for_each(node, &acpi_prt->entries) {
entry = list_entry(node, struct acpi_prt_entry, node);
if ((segment == entry->id.segment)
&& (bus == entry->id.bus)
@@ -93,6 +114,7 @@

static int
acpi_pci_irq_add_entry (
+ struct acpi_prt_list* prt_list,
acpi_handle handle,
int segment,
int bus,
@@ -149,34 +171,137 @@
('A' + entry->pin), prt->source, entry->link.index));

/* TBD: Acquire/release lock */
- list_add_tail(&entry->node, &acpi_prt.entries);
- acpi_prt.count++;
+ list_add_tail(&entry->node, &prt_list->entries);
+ prt_list->count++;

return_VALUE(0);
}


+struct acpi_prt_list*
+acpi_pci_get_prt_list (void)
+{
+ acpi_status status = AE_OK;
+ struct acpi_buffer buffer = {0, NULL};
+ struct acpi_pci_routing_table *prt = NULL;
+ struct acpi_pci_routing_table *entry = NULL;
+ struct acpi_prt_list *prt_list = NULL;
+ struct acpi_prt_ref *prt_ref_entry = NULL;
+ struct list_head *node = NULL;
+
+ ACPI_FUNCTION_TRACE("acpi_pci_irq_get_prt_list");
+
+ /* Create a brand new acpi_prt_list */
+ prt_list = kmalloc(sizeof(struct acpi_prt_list), GFP_KERNEL);
+ if (!prt_list)
+ return_PTR(NULL);
+ memset(prt_list, 0, sizeof(struct acpi_prt_list));
+
+ prt_list->count = 0;
+ INIT_LIST_HEAD(&prt_list->entries);
+
+ /* iterate over all entries in acpi_prt_ref_list, extracting the current _PRT entries */
+ list_for_each(node, &acpi_prt_ref_list.entries) {
+ prt_ref_entry = list_entry(node, struct acpi_prt_ref, node);
+
+ /*
+ * Evaluate this _PRT and add its entries to our local list (prt_list).
+ */
+
+ buffer.length = 0;
+ buffer.pointer = NULL;
+ status = acpi_get_irq_routing_table(prt_ref_entry->handle, &buffer);
+ if (status != AE_BUFFER_OVERFLOW) {
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRT [%s]\n",
+ acpi_format_exception(status)));
+ kfree(prt_list);
+ return_PTR(NULL);
+ }
+
+ prt = kmalloc(buffer.length, GFP_KERNEL);
+ if (!prt) {
+ kfree(prt_list);
+ return_VALUE(NULL);
+ }
+ memset(prt, 0, buffer.length);
+ buffer.pointer = prt;
+
+ status = acpi_get_irq_routing_table(prt_ref_entry->handle, &buffer);
+ if (ACPI_FAILURE(status)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRT [%s]\n",
+ acpi_format_exception(status)));
+ kfree(buffer.pointer);
+ kfree(prt_list);
+ return_PTR(NULL);
+ }
+
+ entry = prt;
+
+ while (entry && (entry->length > 0)) {
+ acpi_pci_irq_add_entry(prt_list, prt_ref_entry->handle, prt_ref_entry->segment,
+ prt_ref_entry->bus, entry);
+ entry = (struct acpi_pci_routing_table *)
+ ((unsigned long) entry + entry->length);
+ }
+
+ kfree(prt);
+ }
+
+ return_PTR(prt_list);
+}
+
+int
+acpi_pci_destroy_prt_list (struct acpi_prt_list* prt_list) {
+ struct list_head *node = NULL;
+ struct list_head *tmp = NULL;
+ struct acpi_prt_entry *entry = NULL;
+
+ ACPI_FUNCTION_TRACE("acpi_pci_irq_destroy_prt_list");
+
+ list_for_each_safe(node, tmp, &prt_list->entries) {
+ entry = list_entry(node, struct acpi_prt_entry, node);
+ list_del(node);
+ kfree(entry);
+ }
+ kfree(prt_list);
+
+ return_VALUE(0);
+}
+
+int
+acpi_pci_commit_prt_list (struct acpi_prt_list* prt_list) {
+
+ ACPI_FUNCTION_TRACE("acpi_pci_irq_commit_prt_list");
+
+ if (acpi_prt != NULL) {
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Attempt to commit acpi_prt twice\n"));
+ return_VALUE(-ENODEV);
+ }
+
+ acpi_prt = prt_list;
+ return_VALUE(0);
+}
+
int
acpi_pci_irq_add_prt (
acpi_handle handle,
int segment,
int bus)
{
- acpi_status status = AE_OK;
- char pathname[ACPI_PATHNAME_MAX] = {0};
- struct acpi_buffer buffer = {0, NULL};
- struct acpi_pci_routing_table *prt = NULL;
- struct acpi_pci_routing_table *entry = NULL;
- static int first_time = 1;
+ static int first_time = 1;
+ struct acpi_prt_ref *entry = NULL;
+ struct acpi_buffer buffer = {0, NULL};
+ char pathname[ACPI_PATHNAME_MAX] = {0};

ACPI_FUNCTION_TRACE("acpi_pci_irq_add_prt");

if (first_time) {
- acpi_prt.count = 0;
- INIT_LIST_HEAD(&acpi_prt.entries);
+ acpi_prt_ref_list.count = 0;
+ INIT_LIST_HEAD(&acpi_prt_ref_list.entries);
first_time = 0;
}

+
/*
* NOTE: We're given a 'handle' to the _PRT object's parent device
* (either a PCI root bridge or PCI-PCI bridge).
@@ -189,42 +314,19 @@
printk(KERN_DEBUG "ACPI: PCI Interrupt Routing Table [%s._PRT]\n",
pathname);

- /*
- * Evaluate this _PRT and add its entries to our global list (acpi_prt).
- */
-
- buffer.length = 0;
- buffer.pointer = NULL;
- status = acpi_get_irq_routing_table(handle, &buffer);
- if (status != AE_BUFFER_OVERFLOW) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRT [%s]\n",
- acpi_format_exception(status)));
- return_VALUE(-ENODEV);
- }
-
- prt = kmalloc(buffer.length, GFP_KERNEL);
- if (!prt)
+
+
+ entry = kmalloc(sizeof(struct acpi_prt_ref), GFP_KERNEL);
+ if (!entry)
return_VALUE(-ENOMEM);
- memset(prt, 0, buffer.length);
- buffer.pointer = prt;
-
- status = acpi_get_irq_routing_table(handle, &buffer);
- if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRT [%s]\n",
- acpi_format_exception(status)));
- kfree(buffer.pointer);
- return_VALUE(-ENODEV);
- }
-
- entry = prt;
-
- while (entry && (entry->length > 0)) {
- acpi_pci_irq_add_entry(handle, segment, bus, entry);
- entry = (struct acpi_pci_routing_table *)
- ((unsigned long) entry + entry->length);
- }
+ memset(entry, 0, sizeof(struct acpi_prt_ref));
+
+ entry->handle = handle;
+ entry->segment = segment;
+ entry->bus = bus;

- kfree(prt);
+ list_add_tail(&entry->node, &acpi_prt_ref_list.entries);
+ acpi_prt_ref_list.count++;

return_VALUE(0);
}
@@ -383,6 +485,14 @@
return_VALUE(dev->irq);
}

+static void __init acpi_irq_pic_mode(void)
+{
+ acpi_irq_model = ACPI_IRQ_MODEL_PIC;
+ acpi_bus_init_irq();
+
+ /* recalculate penalties */
+ acpi_pci_link_calc_penalties();
+}

int __init
acpi_pci_irq_init (void)
@@ -391,27 +501,27 @@

ACPI_FUNCTION_TRACE("acpi_pci_irq_init");

- if (!acpi_prt.count) {
- printk(KERN_WARNING PREFIX "ACPI tables contain no PCI IRQ "
- "routing entries\n");
- return_VALUE(-ENODEV);
- }

- /* Make sure all link devices have a valid IRQ. */
- if (acpi_pci_link_check()) {
- return_VALUE(-ENODEV);
- }
+ /* Calculate IRQ penalties for each link device */
+ acpi_pci_link_calc_penalties();

#ifdef CONFIG_X86_IO_APIC
/* Program IOAPICs using data from PRT entries. */
if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC)
- mp_parse_prt();
+ if (mp_parse_prt())
+ acpi_irq_pic_mode();
#endif
#ifdef CONFIG_IOSAPIC
if (acpi_irq_model == ACPI_IRQ_MODEL_IOSAPIC)
- iosapic_parse_prt();
+ if (iosapic_parse_prt())
+ return_VALUE(-ENODEV);
#endif
-
+
+ /* This one is last, as a catchall */
+ if (acpi_irq_model == ACPI_IRQ_MODEL_PIC)
+ if (pic_parse_prt())
+ return_VALUE(-ENODEV);
+
while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
acpi_pci_irq_enable(dev);

--- linux-2.6.0-test4.orig/drivers/acpi/pci_link.c 2003-08-23 00:52:08.000000000 +0100
+++ linux-2.6.0-test4/drivers/acpi/pci_link.c 2003-09-04 03:29:09.529241336 +0100
@@ -281,6 +281,32 @@


static int
+acpi_pci_link_try_get_current (
+ struct acpi_pci_link *link,
+ int irq)
+{
+ int result;
+
+ ACPI_FUNCTION_TRACE("acpi_pci_link_try_get_current");
+
+ result = acpi_pci_link_get_current(link);
+ if (result && link->irq.active)
+ {
+ return_VALUE(result);
+ }
+
+ if (!link->irq.active)
+ {
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "No active IRQ resource found\n"));
+ printk(KERN_WARNING "_CRS returns NULL! Using IRQ %d for device (%s [%s]).\n", irq, acpi_device_name(link->device), acpi_device_bid(link->device));
+ link->irq.active = irq;
+ }
+
+ return 0;
+}
+
+
+static int
acpi_pci_link_set (
struct acpi_pci_link *link,
int irq)
@@ -294,6 +320,7 @@
struct acpi_buffer buffer = {sizeof(resource)+1, &resource};
int i = 0;
int valid = 0;
+ int resource_type = 0;

ACPI_FUNCTION_TRACE("acpi_pci_link_set");

@@ -317,20 +344,32 @@
}
}

+ /* If IRQ<=15, first try with a "normal" IRQ descriptor. If that fails, try with
+ * an extended one */
+ if (irq <= 15) {
+ resource_type = ACPI_RSTYPE_IRQ;
+ } else {
+ resource_type = ACPI_RSTYPE_EXT_IRQ;
+ }
+
+retry_programming:
+
memset(&resource, 0, sizeof(resource));

/* NOTE: PCI interrupts are always level / active_low / shared. But not all
interrupts > 15 are PCI interrupts. Rely on the ACPI IRQ definition for
parameters */
- if (irq <= 15) {
+ switch(resource_type) {
+ case ACPI_RSTYPE_IRQ:
resource.res.id = ACPI_RSTYPE_IRQ;
resource.res.length = sizeof(struct acpi_resource);
resource.res.data.irq.edge_level = link->irq.edge_level;
resource.res.data.irq.active_high_low = link->irq.active_high_low;
resource.res.data.irq.number_of_interrupts = 1;
resource.res.data.irq.interrupts[0] = irq;
- }
- else {
+ break;
+
+ case ACPI_RSTYPE_EXT_IRQ:
resource.res.id = ACPI_RSTYPE_EXT_IRQ;
resource.res.length = sizeof(struct acpi_resource);
resource.res.data.extended_irq.producer_consumer = ACPI_CONSUMER;
@@ -339,11 +378,21 @@
resource.res.data.extended_irq.number_of_interrupts = 1;
resource.res.data.extended_irq.interrupts[0] = irq;
/* ignore resource_source, it's optional */
+ break;
}
resource.end.id = ACPI_RSTYPE_END_TAG;

/* Attempt to set the resource */
status = acpi_set_current_resources(link->handle, &buffer);
+
+ /* if we failed and IRQ <= 15, try again with an extended descriptor */
+ if (ACPI_FAILURE(status) && (resource_type == ACPI_RSTYPE_IRQ)) {
+ resource_type = ACPI_RSTYPE_EXT_IRQ;
+ printk(PREFIX "Retrying with extended IRQ descriptor\n");
+ goto retry_programming;
+ }
+
+ /* check for total failure */
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _SRS\n"));
return_VALUE(-ENODEV);
@@ -361,7 +410,7 @@
}

/* Make sure the active IRQ is the one we requested. */
- result = acpi_pci_link_get_current(link);
+ result = acpi_pci_link_try_get_current(link, irq);
if (result) {
return_VALUE(result);
}
@@ -401,23 +450,26 @@
* as 'best bets' for PCI use.
*/

-static int acpi_irq_penalty[ACPI_MAX_IRQS] = {
+static int acpi_irq_default_penalty[ACPI_MAX_IRQS] = {
1000000, 1000000, 1000000, 10000,
10000, 0, 10000, 10000,
10000, 0, 0, 0,
10000, 100000, 100000, 100000,
};

+static int acpi_irq_penalty[ACPI_MAX_IRQS] = { 0 };

int
-acpi_pci_link_check (void)
+acpi_pci_link_calc_penalties (void)
{
struct list_head *node = NULL;
struct acpi_pci_link *link = NULL;
int i = 0;

- ACPI_FUNCTION_TRACE("acpi_pci_link_check");
+ ACPI_FUNCTION_TRACE("acpi_pci_link_calc_penalties");

+ memcpy(&acpi_irq_penalty, &acpi_irq_default_penalty, sizeof(acpi_irq_default_penalty));
+
/*
* Update penalties to facilitate IRQ balancing.
*/
@@ -428,6 +480,7 @@
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
continue;
}
+ link->irq.setonboot = 0;

if (link->irq.active)
acpi_irq_penalty[link->irq.active] += 100;
@@ -458,18 +511,18 @@
irq = link->irq.possible[0];
}

- /*
- * Select the best IRQ. This is done in reverse to promote
- * the use of IRQs 9, 10, 11, and >15.
- */
- for (i=(link->irq.possible_count-1); i>0; i--) {
- if (acpi_irq_penalty[irq] > acpi_irq_penalty[link->irq.possible[i]])
- irq = link->irq.possible[i];
- }
+ /*
+ * Select the best IRQ. This is done in reverse to promote
+ * the use of IRQs 9, 10, 11, and >15.
+ */
+ for (i=(link->irq.possible_count-1); i>0; i--) {
+ if (acpi_irq_penalty[irq] > acpi_irq_penalty[link->irq.possible[i]])
+ irq = link->irq.possible[i];
+ }

/* Attempt to enable the link device at this IRQ. */
if (acpi_pci_link_set(link, irq)) {
- printk(PREFIX "Unable to set IRQ for %s [%s] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off\n",
+ printk(PREFIX "Unable to set IRQ for %s [%s] (likely buggy ACPI BIOS, please report to acpi-devel!)\n",
acpi_device_name(link->device),
acpi_device_bid(link->device));
return_VALUE(-ENODEV);
@@ -575,10 +628,6 @@
else
printk(" %d", link->irq.possible[i]);
}
- if (!link->irq.active)
- printk(", disabled");
- else if (!found)
- printk(", enabled at IRQ %d", link->irq.active);
printk(")\n");

/* TBD: Acquire/release lock */
--- linux-2.6.0-test4.orig/drivers/acpi/bus.c 2003-08-23 00:57:08.000000000 +0100
+++ linux-2.6.0-test4/drivers/acpi/bus.c 2003-08-30 23:23:08.000000000 +0100
@@ -536,7 +536,7 @@
Initialization/Cleanup
-------------------------------------------------------------------------- */

-static int __init
+int
acpi_bus_init_irq (void)
{
acpi_status status = AE_OK;
--- linux-2.6.0-test4.orig/include/acpi/acpi_drivers.h 2003-08-23 00:58:03.000000000 +0100
+++ linux-2.6.0-test4/include/acpi/acpi_drivers.h 2003-08-30 23:21:15.000000000 +0100
@@ -26,6 +26,9 @@
#ifndef __ACPI_DRIVERS_H__
#define __ACPI_DRIVERS_H__

+/* forward definitions */
+struct acpi_prt_list;
+
#include <linux/acpi.h>
#include <acpi/acpi_bus.h>

@@ -59,12 +62,15 @@

/* ACPI PCI Interrupt Link (pci_link.c) */

-int acpi_pci_link_check (void);
+int acpi_pci_link_calc_penalties (void);
int acpi_pci_link_get_irq (acpi_handle handle, int index, int* edge_level, int* active_high_low);

/* ACPI PCI Interrupt Routing (pci_irq.c) */

int acpi_pci_irq_add_prt (acpi_handle handle, int segment, int bus);
+int acpi_pci_commit_prt_list (struct acpi_prt_list* prt_list);
+int acpi_pci_destroy_prt_list (struct acpi_prt_list* prt_list);
+struct acpi_prt_list* acpi_pci_get_prt_list (void);

/* ACPI PCI Device Binding (pci_bind.c) */

--- linux-2.6.0-test4.orig/include/linux/acpi.h 2003-08-23 00:50:23.000000000 +0100
+++ linux-2.6.0-test4/include/linux/acpi.h 2003-08-30 23:19:27.000000000 +0100
@@ -399,7 +399,7 @@
struct list_head entries;
};

-extern struct acpi_prt_list acpi_prt;
+extern struct acpi_prt_list* acpi_prt;

struct pci_dev;

--- linux-2.6.0-test4.orig/include/acpi/acpi_bus.h 2003-08-23 00:54:33.000000000 +0100
+++ linux-2.6.0-test4/include/acpi/acpi_bus.h 2003-08-30 23:22:02.000000000 +0100
@@ -308,6 +308,8 @@
int acpi_create_dir(struct acpi_device *);
void acpi_remove_dir(struct acpi_device *);

+int acpi_bus_init_irq (void);
+
#endif /*CONFIG_ACPI_BUS*/

#endif /*__ACPI_BUS_H__*/
---- END linux-2.6.0-test4-acpi-picmode-5.patch ----

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/