Re: Problem with PIO with ide-scsi in Kernel 2.4.22

From: Ben Peddell
Date: Sun Sep 21 2003 - 07:21:07 EST

Next message: Jan Dittmer: "Re: Network broke between test4-bk4 and test4-bk5"
Previous message: Mirko Lindner: "Re: [PATCH] [2.4] Fix memleak on error exit path in sk98 driver."
In reply to: Ben Peddell: "Problem with PIO with ide-scsi in Kernel 2.4.22"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Ben Peddell wrote:

I've had a problem with the ide-scsi (ATAPI SCSI emulation) module with Linux 2.4.22.

When I disable DMA and read the CD-ROM, it reads a random amount up to about 1MB, and then has a timeout.
This never happened with linux-2.4.19-16mdk. I have even tried feeding the old settings into the configurator, but without success.
Here, I've set the log level to 9:

I just had the problem again (didn't freeze the machine this time - I was in X).
I tried to list the contents of a CD-ROM, and the program was frozen, not accepting any signals. So, I hdparm'ed the CD-ROM drive, and found that DMA had been disabled.
So, I re-enabled DMA, but shortly thereafter, something disabled DMA again.
hdc: DMA disabled
I had to kill ls, and finally was able to re-enable DMA without it being disabled again.

cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
scsi : aborting command due to timeout : pid 119, scsi0, channel 0, id 0, lun 0 Read TOC 00 00 00 00 00 00 00 0c 00
hdc: irq timeout: status=0xd0 { Busy }
hdc: DMA disabled
hdc: ATAPI reset complete
scsi : aborting command due to timeout : pid 120, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 120) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 120) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
hdc: irq timeout: status=0xd0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
scsi : aborting command due to timeout : pid 121, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 121) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 121) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
hdc: irq timeout: status=0xd0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
scsi : aborting command due to timeout : pid 122, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 122) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 122) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
hdc: irq timeout: status=0xd0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
sr00:00: old sense key None
Non-extended sense class 0 code 0x0
scsi : aborting command due to timeout : pid 124, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
hdc: irq timeout: status=0xd0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
scsi : aborting command due to timeout : pid 125, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 125) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 125) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
hdc: irq timeout: status=0xd0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdc: set_drive_speed_status: error=0xb4
scsi : aborting command due to timeout : pid 126, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 126) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 126) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
scsi : aborting command due to timeout : pid 129, scsi0, channel 0, id 0, lun 0 Read TOC 00 00 00 00 00 00 00 0c 40
hdc: irq timeout: status=0xd0 { Busy }
hdc: DMA disabled
hdc: ATAPI reset complete
hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdc: set_drive_speed_status: error=0xb4
scsi : aborting command due to timeout : pid 130, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 130) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 130) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
sr00:00: old sense key None
Non-extended sense class 0 code 0x0
scsi : aborting command due to timeout : pid 134, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
hdc: irq timeout: status=0xd0 { Busy }
hdc: DMA disabled
hdc: ATAPI reset complete
hdc: irq timeout: status=0xd0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdc: set_drive_speed_status: error=0xb4
scsi : aborting command due to timeout : pid 135, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 135) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 135) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
sr00:00: old sense key None
Non-extended sense class 0 code 0x0
scsi : aborting command due to timeout : pid 137, scsi0, channel 0, id 0, lun 0 Read Capacity 00 00 00 00 00 00 00 00 00
hdc: irq timeout: status=0xd0 { Busy }
hdc: DMA disabled
hdc: ATAPI reset complete

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Jan Dittmer: "Re: Network broke between test4-bk4 and test4-bk5"
Previous message: Mirko Lindner: "Re: [PATCH] [2.4] Fix memleak on error exit path in sk98 driver."
In reply to: Ben Peddell: "Problem with PIO with ide-scsi in Kernel 2.4.22"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]