Re: [PATCH] i2c driver fixes for 2.6.0-test5
From: Greg KH
Date: Mon Sep 22 2003 - 18:51:05 EST
ChangeSet 1.1315.1.14, 2003/09/22 12:46:46-07:00, greg@xxxxxxxxx
[PATCH] I2C: move i2c-prosavage.c driver to drivers/i2c/busses where it belongs.
drivers/i2c/i2c-prosavage.c | 356 -------------------------------------
drivers/i2c/Kconfig | 14 -
drivers/i2c/Makefile | 1
drivers/i2c/busses/Kconfig | 14 +
drivers/i2c/busses/Makefile | 1
drivers/i2c/busses/i2c-prosavage.c | 356 +++++++++++++++++++++++++++++++++++++
6 files changed, 371 insertions(+), 371 deletions(-)
diff -Nru a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
--- a/drivers/i2c/Kconfig Mon Sep 22 16:13:48 2003
+++ b/drivers/i2c/Kconfig Mon Sep 22 16:13:48 2003
@@ -48,20 +48,6 @@
This support is also available as a module. If so, the module
will be called i2c-algo-bit.
-config I2C_PROSAVAGE
- tristate "S3/VIA (Pro)Savage"
- depends on I2C_ALGOBIT && PCI && EXPERIMENTAL
- help
- If you say yes to this option, support will be included for the
- I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8
- graphics processors.
- chipsets supported:
- S3/VIA KM266/VT8375 aka ProSavage8
- S3/VIA KM133/VT8365 aka Savage4
-
- This support is also available as a module. If so, the module
- will be called i2c-prosavage.
-
config I2C_PHILIPSPAR
tristate "Philips style parallel port adapter"
depends on I2C_ALGOBIT && PARPORT
diff -Nru a/drivers/i2c/Makefile b/drivers/i2c/Makefile
--- a/drivers/i2c/Makefile Mon Sep 22 16:13:48 2003
+++ b/drivers/i2c/Makefile Mon Sep 22 16:13:48 2003
@@ -5,7 +5,6 @@
obj-$(CONFIG_I2C) += i2c-core.o
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bit.o
-obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o
obj-$(CONFIG_I2C_PHILIPSPAR) += i2c-philips-par.o
obj-$(CONFIG_I2C_ELV) += i2c-elv.o
obj-$(CONFIG_I2C_VELLEMAN) += i2c-velleman.o
diff -Nru a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
--- a/drivers/i2c/busses/Kconfig Mon Sep 22 16:13:48 2003
+++ b/drivers/i2c/busses/Kconfig Mon Sep 22 16:13:48 2003
@@ -113,6 +113,20 @@
This driver can also be built as a module. If so, the module
will be called i2c-piix4.
+config I2C_PROSAVAGE
+ tristate "S3/VIA (Pro)Savage"
+ depends on I2C_ALGOBIT && PCI && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the
+ I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8
+ graphics processors.
+ chipsets supported:
+ S3/VIA KM266/VT8375 aka ProSavage8
+ S3/VIA KM133/VT8365 aka Savage4
+
+ This support is also available as a module. If so, the module
+ will be called i2c-prosavage.
+
config I2C_SAVAGE4
tristate "S3 Savage 4"
depends on I2C && PCI && EXPERIMENTAL
diff -Nru a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
--- a/drivers/i2c/busses/Makefile Mon Sep 22 16:13:48 2003
+++ b/drivers/i2c/busses/Makefile Mon Sep 22 16:13:48 2003
@@ -11,6 +11,7 @@
obj-$(CONFIG_I2C_ISA) += i2c-isa.o
obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
+obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o
obj-$(CONFIG_I2C_SAVAGE4) += i2c-savage4.o
obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o
obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o
diff -Nru a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c
--- /dev/null Wed Dec 31 16:00:00 1969
+++ b/drivers/i2c/busses/i2c-prosavage.c Mon Sep 22 16:13:48 2003
@@ -0,0 +1,356 @@
+/*
+ * kernel/busses/i2c-prosavage.c
+ *
+ * i2c bus driver for S3/VIA 8365/8375 graphics processor.
+ * Copyright (c) 2003 Henk Vergonet <henk@xxxxxxxxxxxxxx>
+ * Based on code written by:
+ * Frodo Looijaard <frodol@xxxxxx>,
+ * Philip Edelbrock <phil@xxxxxxxxxxxxx>,
+ * Ralph Metzler <rjkm@xxxxxxxxxxxxxxxx>, and
+ * Mark D. Studebaker <mdsxyz123@xxxxxxxxx>
+ * Simon Vogl
+ * and others
+ *
+ * Please read the lm_sensors documentation for details on use.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+/* 18-05-2003 HVE - created
+ * 14-06-2003 HVE - adapted for lm_sensors2
+ * 17-06-2003 HVE - linux 2.5.xx compatible
+ * 18-06-2003 HVE - codingstyle
+ * 21-06-2003 HVE - compatibility lm_sensors2 and linux 2.5.xx
+ * codingstyle, mmio enabled
+ *
+ * This driver interfaces to the I2C bus of the VIA north bridge embedded
+ * ProSavage4/8 devices. Usefull for gaining access to the TV Encoder chips.
+ *
+ * Graphics cores:
+ * S3/VIA KM266/VT8375 aka ProSavage8
+ * S3/VIA KM133/VT8365 aka Savage4
+ *
+ * Two serial busses are implemented:
+ * SERIAL1 - I2C serial communications interface
+ * SERIAL2 - DDC2 monitor communications interface
+ *
+ * Tested on a FX41 mainboard, see http://www.shuttle.com
+ *
+ *
+ * TODO:
+ * - integration with prosavage framebuffer device
+ * (Additional documentation needed :(
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+#include <asm/io.h>
+
+
+/*
+ * driver configuration
+ */
+#define DRIVER_ID "i2c-prosavage"
+#define DRIVER_VERSION "20030621"
+
+#define ADAPTER_NAME(x) (x).name
+
+#define MAX_BUSSES 2
+
+struct s_i2c_bus {
+ u8 *mmvga;
+ int i2c_reg;
+ int adap_ok;
+ struct i2c_adapter adap;
+ struct i2c_algo_bit_data algo;
+};
+
+struct s_i2c_chip {
+ u8 *mmio;
+ struct s_i2c_bus i2c_bus[MAX_BUSSES];
+};
+
+
+/*
+ * i2c configuration
+ */
+#ifndef I2C_HW_B_S3VIA
+#define I2C_HW_B_S3VIA 0x18 /* S3VIA ProSavage adapter */
+#endif
+
+/* delays */
+#define CYCLE_DELAY 10
+#define TIMEOUT (HZ / 2)
+
+
+/*
+ * S3/VIA 8365/8375 registers
+ */
+#ifndef PCI_VENDOR_ID_S3
+#define PCI_VENDOR_ID_S3 0x5333
+#endif
+#ifndef PCI_DEVICE_ID_S3_SAVAGE4
+#define PCI_DEVICE_ID_S3_SAVAGE4 0x8a25
+#endif
+#ifndef PCI_DEVICE_ID_S3_PROSAVAGE8
+#define PCI_DEVICE_ID_S3_PROSAVAGE8 0x8d04
+#endif
+
+#define VGA_CR_IX 0x3d4
+#define VGA_CR_DATA 0x3d5
+
+#define CR_SERIAL1 0xa0 /* I2C serial communications interface */
+#define MM_SERIAL1 0xff20
+#define CR_SERIAL2 0xb1 /* DDC2 monitor communications interface */
+
+/* based on vt8365 documentation */
+#define I2C_ENAB 0x10
+#define I2C_SCL_OUT 0x01
+#define I2C_SDA_OUT 0x02
+#define I2C_SCL_IN 0x04
+#define I2C_SDA_IN 0x08
+
+#define SET_CR_IX(p, val) *((p)->mmvga + VGA_CR_IX) = (u8)(val)
+#define SET_CR_DATA(p, val) *((p)->mmvga + VGA_CR_DATA) = (u8)(val)
+#define GET_CR_DATA(p) *((p)->mmvga + VGA_CR_DATA)
+
+
+/*
+ * Serial bus line handling
+ *
+ * serial communications register as parameter in private data
+ *
+ * TODO: locks with other code sections accessing video registers?
+ */
+static void bit_s3via_setscl(void *bus, int val)
+{
+ struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
+ unsigned int r;
+
+ SET_CR_IX(p, p->i2c_reg);
+ r = GET_CR_DATA(p);
+ r |= I2C_ENAB;
+ if (val) {
+ r |= I2C_SCL_OUT;
+ } else {
+ r &= ~I2C_SCL_OUT;
+ }
+ SET_CR_DATA(p, r);
+}
+
+static void bit_s3via_setsda(void *bus, int val)
+{
+ struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
+ unsigned int r;
+
+ SET_CR_IX(p, p->i2c_reg);
+ r = GET_CR_DATA(p);
+ r |= I2C_ENAB;
+ if (val) {
+ r |= I2C_SDA_OUT;
+ } else {
+ r &= ~I2C_SDA_OUT;
+ }
+ SET_CR_DATA(p, r);
+}
+
+static int bit_s3via_getscl(void *bus)
+{
+ struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
+
+ SET_CR_IX(p, p->i2c_reg);
+ return (0 != (GET_CR_DATA(p) & I2C_SCL_IN));
+}
+
+static int bit_s3via_getsda(void *bus)
+{
+ struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
+
+ SET_CR_IX(p, p->i2c_reg);
+ return (0 != (GET_CR_DATA(p) & I2C_SDA_IN));
+}
+
+
+/*
+ * adapter initialisation
+ */
+static int i2c_register_bus(struct s_i2c_bus *p, u8 *mmvga, u32 i2c_reg)
+{
+ int ret;
+ p->adap.owner = THIS_MODULE;
+ p->adap.id = I2C_HW_B_S3VIA;
+ p->adap.algo_data = &p->algo;
+ p->algo.setsda = bit_s3via_setsda;
+ p->algo.setscl = bit_s3via_setscl;
+ p->algo.getsda = bit_s3via_getsda;
+ p->algo.getscl = bit_s3via_getscl;
+ p->algo.udelay = CYCLE_DELAY;
+ p->algo.mdelay = CYCLE_DELAY;
+ p->algo.timeout = TIMEOUT;
+ p->algo.data = p;
+ p->mmvga = mmvga;
+ p->i2c_reg = i2c_reg;
+
+ ret = i2c_bit_add_bus(&p->adap);
+ if (ret) {
+ return ret;
+ }
+
+ p->adap_ok = 1;
+ return 0;
+}
+
+
+/*
+ * Cleanup stuff
+ */
+static void __devexit prosavage_remove(struct pci_dev *dev)
+{
+ struct s_i2c_chip *chip;
+ int i, ret;
+
+ chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
+
+ if (!chip) {
+ return;
+ }
+ for (i = MAX_BUSSES - 1; i >= 0; i--) {
+ if (chip->i2c_bus[i].adap_ok == 0)
+ continue;
+
+ ret = i2c_bit_del_bus(&chip->i2c_bus[i].adap);
+ if (ret) {
+ printk(DRIVER_ID ": %s not removed\n",
+ ADAPTER_NAME(chip->i2c_bus[i].adap));
+ }
+ }
+ if (chip->mmio) {
+ iounmap(chip->mmio);
+ }
+ kfree(chip);
+}
+
+
+/*
+ * Detect chip and initialize it
+ */
+static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ int ret;
+ unsigned long base, len;
+ struct s_i2c_chip *chip;
+ struct s_i2c_bus *bus;
+
+ pci_set_drvdata(dev, kmalloc(sizeof(struct s_i2c_chip), GFP_KERNEL));
+ chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
+ if (chip == NULL) {
+ return -ENOMEM;
+ }
+
+ memset(chip, 0, sizeof(struct s_i2c_chip));
+
+ base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK;
+ len = dev->resource[0].end - base + 1;
+ chip->mmio = ioremap_nocache(base, len);
+
+ if (chip->mmio == NULL) {
+ printk (DRIVER_ID ": ioremap failed\n");
+ prosavage_remove(dev);
+ return -ENODEV;
+ }
+
+
+ /*
+ * Chip initialisation
+ */
+ /* Unlock Extended IO Space ??? */
+
+
+ /*
+ * i2c bus registration
+ */
+ bus = &chip->i2c_bus[0];
+ snprintf(ADAPTER_NAME(bus->adap), sizeof(ADAPTER_NAME(bus->adap)),
+ "ProSavage I2C bus at %02x:%02x.%x",
+ dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ ret = i2c_register_bus(bus, chip->mmio + 0x8000, CR_SERIAL1);
+ if (ret) {
+ goto err_adap;
+ }
+ /*
+ * ddc bus registration
+ */
+ bus = &chip->i2c_bus[1];
+ snprintf(ADAPTER_NAME(bus->adap), sizeof(ADAPTER_NAME(bus->adap)),
+ "ProSavage DDC bus at %02x:%02x.%x",
+ dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ ret = i2c_register_bus(bus, chip->mmio + 0x8000, CR_SERIAL2);
+ if (ret) {
+ goto err_adap;
+ }
+ return 0;
+err_adap:
+ printk (DRIVER_ID ": %s failed\n", ADAPTER_NAME(bus->adap));
+ prosavage_remove(dev);
+ return ret;
+}
+
+
+/*
+ * Data for PCI driver interface
+ */
+static struct pci_device_id prosavage_pci_tbl[] = {
+ {
+ .vendor = PCI_VENDOR_ID_S3,
+ .device = PCI_DEVICE_ID_S3_SAVAGE4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },{
+ .vendor = PCI_VENDOR_ID_S3,
+ .device = PCI_DEVICE_ID_S3_PROSAVAGE8,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },{ 0, }
+};
+
+static struct pci_driver prosavage_driver = {
+ .name = "prosavage-smbus",
+ .id_table = prosavage_pci_tbl,
+ .probe = prosavage_probe,
+ .remove = __devexit_p(prosavage_remove),
+};
+
+static int __init i2c_prosavage_init(void)
+{
+ printk(DRIVER_ID " version %s (%s)\n", I2C_VERSION, DRIVER_VERSION);
+ return pci_module_init(&prosavage_driver);
+}
+
+static void __exit i2c_prosavage_exit(void)
+{
+ pci_unregister_driver(&prosavage_driver);
+}
+
+MODULE_DEVICE_TABLE(pci, prosavage_pci_tbl);
+MODULE_AUTHOR("Henk Vergonet");
+MODULE_DESCRIPTION("ProSavage VIA 8365/8375 smbus driver");
+MODULE_LICENSE("GPL");
+
+module_init (i2c_prosavage_init);
+module_exit (i2c_prosavage_exit);
diff -Nru a/drivers/i2c/i2c-prosavage.c b/drivers/i2c/i2c-prosavage.c
--- a/drivers/i2c/i2c-prosavage.c Mon Sep 22 16:13:48 2003
+++ /dev/null Wed Dec 31 16:00:00 1969
@@ -1,356 +0,0 @@
-/*
- * kernel/busses/i2c-prosavage.c
- *
- * i2c bus driver for S3/VIA 8365/8375 graphics processor.
- * Copyright (c) 2003 Henk Vergonet <henk@xxxxxxxxxxxxxx>
- * Based on code written by:
- * Frodo Looijaard <frodol@xxxxxx>,
- * Philip Edelbrock <phil@xxxxxxxxxxxxx>,
- * Ralph Metzler <rjkm@xxxxxxxxxxxxxxxx>, and
- * Mark D. Studebaker <mdsxyz123@xxxxxxxxx>
- * Simon Vogl
- * and others
- *
- * Please read the lm_sensors documentation for details on use.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-/* 18-05-2003 HVE - created
- * 14-06-2003 HVE - adapted for lm_sensors2
- * 17-06-2003 HVE - linux 2.5.xx compatible
- * 18-06-2003 HVE - codingstyle
- * 21-06-2003 HVE - compatibility lm_sensors2 and linux 2.5.xx
- * codingstyle, mmio enabled
- *
- * This driver interfaces to the I2C bus of the VIA north bridge embedded
- * ProSavage4/8 devices. Usefull for gaining access to the TV Encoder chips.
- *
- * Graphics cores:
- * S3/VIA KM266/VT8375 aka ProSavage8
- * S3/VIA KM133/VT8365 aka Savage4
- *
- * Two serial busses are implemented:
- * SERIAL1 - I2C serial communications interface
- * SERIAL2 - DDC2 monitor communications interface
- *
- * Tested on a FX41 mainboard, see http://www.shuttle.com
- *
- *
- * TODO:
- * - integration with prosavage framebuffer device
- * (Additional documentation needed :(
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-
-#include <asm/io.h>
-
-
-/*
- * driver configuration
- */
-#define DRIVER_ID "i2c-prosavage"
-#define DRIVER_VERSION "20030621"
-
-#define ADAPTER_NAME(x) (x).name
-
-#define MAX_BUSSES 2
-
-struct s_i2c_bus {
- u8 *mmvga;
- int i2c_reg;
- int adap_ok;
- struct i2c_adapter adap;
- struct i2c_algo_bit_data algo;
-};
-
-struct s_i2c_chip {
- u8 *mmio;
- struct s_i2c_bus i2c_bus[MAX_BUSSES];
-};
-
-
-/*
- * i2c configuration
- */
-#ifndef I2C_HW_B_S3VIA
-#define I2C_HW_B_S3VIA 0x18 /* S3VIA ProSavage adapter */
-#endif
-
-/* delays */
-#define CYCLE_DELAY 10
-#define TIMEOUT (HZ / 2)
-
-
-/*
- * S3/VIA 8365/8375 registers
- */
-#ifndef PCI_VENDOR_ID_S3
-#define PCI_VENDOR_ID_S3 0x5333
-#endif
-#ifndef PCI_DEVICE_ID_S3_SAVAGE4
-#define PCI_DEVICE_ID_S3_SAVAGE4 0x8a25
-#endif
-#ifndef PCI_DEVICE_ID_S3_PROSAVAGE8
-#define PCI_DEVICE_ID_S3_PROSAVAGE8 0x8d04
-#endif
-
-#define VGA_CR_IX 0x3d4
-#define VGA_CR_DATA 0x3d5
-
-#define CR_SERIAL1 0xa0 /* I2C serial communications interface */
-#define MM_SERIAL1 0xff20
-#define CR_SERIAL2 0xb1 /* DDC2 monitor communications interface */
-
-/* based on vt8365 documentation */
-#define I2C_ENAB 0x10
-#define I2C_SCL_OUT 0x01
-#define I2C_SDA_OUT 0x02
-#define I2C_SCL_IN 0x04
-#define I2C_SDA_IN 0x08
-
-#define SET_CR_IX(p, val) *((p)->mmvga + VGA_CR_IX) = (u8)(val)
-#define SET_CR_DATA(p, val) *((p)->mmvga + VGA_CR_DATA) = (u8)(val)
-#define GET_CR_DATA(p) *((p)->mmvga + VGA_CR_DATA)
-
-
-/*
- * Serial bus line handling
- *
- * serial communications register as parameter in private data
- *
- * TODO: locks with other code sections accessing video registers?
- */
-static void bit_s3via_setscl(void *bus, int val)
-{
- struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
- unsigned int r;
-
- SET_CR_IX(p, p->i2c_reg);
- r = GET_CR_DATA(p);
- r |= I2C_ENAB;
- if (val) {
- r |= I2C_SCL_OUT;
- } else {
- r &= ~I2C_SCL_OUT;
- }
- SET_CR_DATA(p, r);
-}
-
-static void bit_s3via_setsda(void *bus, int val)
-{
- struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
- unsigned int r;
-
- SET_CR_IX(p, p->i2c_reg);
- r = GET_CR_DATA(p);
- r |= I2C_ENAB;
- if (val) {
- r |= I2C_SDA_OUT;
- } else {
- r &= ~I2C_SDA_OUT;
- }
- SET_CR_DATA(p, r);
-}
-
-static int bit_s3via_getscl(void *bus)
-{
- struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
-
- SET_CR_IX(p, p->i2c_reg);
- return (0 != (GET_CR_DATA(p) & I2C_SCL_IN));
-}
-
-static int bit_s3via_getsda(void *bus)
-{
- struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
-
- SET_CR_IX(p, p->i2c_reg);
- return (0 != (GET_CR_DATA(p) & I2C_SDA_IN));
-}
-
-
-/*
- * adapter initialisation
- */
-static int i2c_register_bus(struct s_i2c_bus *p, u8 *mmvga, u32 i2c_reg)
-{
- int ret;
- p->adap.owner = THIS_MODULE;
- p->adap.id = I2C_HW_B_S3VIA;
- p->adap.algo_data = &p->algo;
- p->algo.setsda = bit_s3via_setsda;
- p->algo.setscl = bit_s3via_setscl;
- p->algo.getsda = bit_s3via_getsda;
- p->algo.getscl = bit_s3via_getscl;
- p->algo.udelay = CYCLE_DELAY;
- p->algo.mdelay = CYCLE_DELAY;
- p->algo.timeout = TIMEOUT;
- p->algo.data = p;
- p->mmvga = mmvga;
- p->i2c_reg = i2c_reg;
-
- ret = i2c_bit_add_bus(&p->adap);
- if (ret) {
- return ret;
- }
-
- p->adap_ok = 1;
- return 0;
-}
-
-
-/*
- * Cleanup stuff
- */
-static void __devexit prosavage_remove(struct pci_dev *dev)
-{
- struct s_i2c_chip *chip;
- int i, ret;
-
- chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
-
- if (!chip) {
- return;
- }
- for (i = MAX_BUSSES - 1; i >= 0; i--) {
- if (chip->i2c_bus[i].adap_ok == 0)
- continue;
-
- ret = i2c_bit_del_bus(&chip->i2c_bus[i].adap);
- if (ret) {
- printk(DRIVER_ID ": %s not removed\n",
- ADAPTER_NAME(chip->i2c_bus[i].adap));
- }
- }
- if (chip->mmio) {
- iounmap(chip->mmio);
- }
- kfree(chip);
-}
-
-
-/*
- * Detect chip and initialize it
- */
-static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
- int ret;
- unsigned long base, len;
- struct s_i2c_chip *chip;
- struct s_i2c_bus *bus;
-
- pci_set_drvdata(dev, kmalloc(sizeof(struct s_i2c_chip), GFP_KERNEL));
- chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
- if (chip == NULL) {
- return -ENOMEM;
- }
-
- memset(chip, 0, sizeof(struct s_i2c_chip));
-
- base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK;
- len = dev->resource[0].end - base + 1;
- chip->mmio = ioremap_nocache(base, len);
-
- if (chip->mmio == NULL) {
- printk (DRIVER_ID ": ioremap failed\n");
- prosavage_remove(dev);
- return -ENODEV;
- }
-
-
- /*
- * Chip initialisation
- */
- /* Unlock Extended IO Space ??? */
-
-
- /*
- * i2c bus registration
- */
- bus = &chip->i2c_bus[0];
- snprintf(ADAPTER_NAME(bus->adap), sizeof(ADAPTER_NAME(bus->adap)),
- "ProSavage I2C bus at %02x:%02x.%x",
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- ret = i2c_register_bus(bus, chip->mmio + 0x8000, CR_SERIAL1);
- if (ret) {
- goto err_adap;
- }
- /*
- * ddc bus registration
- */
- bus = &chip->i2c_bus[1];
- snprintf(ADAPTER_NAME(bus->adap), sizeof(ADAPTER_NAME(bus->adap)),
- "ProSavage DDC bus at %02x:%02x.%x",
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- ret = i2c_register_bus(bus, chip->mmio + 0x8000, CR_SERIAL2);
- if (ret) {
- goto err_adap;
- }
- return 0;
-err_adap:
- printk (DRIVER_ID ": %s failed\n", ADAPTER_NAME(bus->adap));
- prosavage_remove(dev);
- return ret;
-}
-
-
-/*
- * Data for PCI driver interface
- */
-static struct pci_device_id prosavage_pci_tbl[] = {
- {
- .vendor = PCI_VENDOR_ID_S3,
- .device = PCI_DEVICE_ID_S3_SAVAGE4,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- },{
- .vendor = PCI_VENDOR_ID_S3,
- .device = PCI_DEVICE_ID_S3_PROSAVAGE8,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- },{ 0, }
-};
-
-static struct pci_driver prosavage_driver = {
- .name = "prosavage-smbus",
- .id_table = prosavage_pci_tbl,
- .probe = prosavage_probe,
- .remove = __devexit_p(prosavage_remove),
-};
-
-static int __init i2c_prosavage_init(void)
-{
- printk(DRIVER_ID " version %s (%s)\n", I2C_VERSION, DRIVER_VERSION);
- return pci_module_init(&prosavage_driver);
-}
-
-static void __exit i2c_prosavage_exit(void)
-{
- pci_unregister_driver(&prosavage_driver);
-}
-
-MODULE_DEVICE_TABLE(pci, prosavage_pci_tbl);
-MODULE_AUTHOR("Henk Vergonet");
-MODULE_DESCRIPTION("ProSavage VIA 8365/8375 smbus driver");
-MODULE_LICENSE("GPL");
-
-module_init (i2c_prosavage_init);
-module_exit (i2c_prosavage_exit);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/