Re: 3C59x module doesn't work in 2.6.0-test6

[Michal Semler (volny.cz)]

Hi,

I call simply "modprobe 3c59x" as always.
In all previous kernels before 2.6.0-test6 it worked (2.4,2.2)

/etc/modprobe.conf
alias eth0 3c59x
options 3c59x 3c509x debug=0 options=4,8

It's generated from /etc/modules.conf in 2.4
alias eth0 3c59x
options 3c59x 3c509x debug=0 options=4,8

And looks the same

Info about card from 2.4.22:

3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
01:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xcc00. Vers LK1.1.18-ac
 00:50:04:6a:58:cd, IRQ 10
  product code 544e rev 00.9 date 02-17-99
  Internal config register is 1800000, transceivers 0xa.
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
  MII transceiver found at address 24, status 782d.
  Enabling bus-master transmits and whole-frame receives.
01:0a.0: scatter/gather enabled. h/w checksums enabled

Michal 

Dne po 29. září 2003 19:14 jste napsal(a):
> On Sun, 28 Sep 2003 15:02:38 +0200 "Michal Semler (volny.cz)" 
<cijoml@xxxxxxxx> wrote:
> | Hi,
> |
> | I compiled 2.6.0-test6, but my ethernet card doesn't work:
> |
> | modprobe 3c59x tells this:
> | Sep 28 10:06:58 tata kernel: 3c59x: Unknown parameter `3c509x'
>
> So 3c59x complains about '3c509x' ??
>
> Did you use any module parameters, either on the modprobe command
> or in the /etc/modprobe.conf file?
>
> --
> ~Randy

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/