PROBLEM: Just panic. Happens often.

From: majek
Date: Fri Oct 03 2003 - 13:22:02 EST

Next message: Erik Bourget: "Re: CMD680, kernel 2.4.21, and heartache"
Previous message: Manfred Spraul: "Re: [PATCH] [2/2] posix message queues"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Everything in attachments.es1371 26760 0
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-17feffff : System RAM
00100000-00341084 : Kernel code
00341085-003cfd47 : Kernel data
17ff0000-17ff2fff : ACPI Non-volatile Storage
17ff3000-17ffffff : ACPI Tables
d0000000-d7ffffff : VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
d8000000-d9ffffff : PCI Bus #01
d8000000-d9ffffff : nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro]
d8000000-d817ffff : vesafb
da000000-dbffffff : PCI Bus #01
da000000-daffffff : nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro]
dc000000-dc0000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
dc000000-dc0000ff : 8139too
dc001000-dc001fff : Brooktree Corporation Bt878 Video Capture
dc002000-dc002fff : Brooktree Corporation Bt878 Audio Capture
ffff0000-ffffffff : reserved
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 8363
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: da000000-dbffffff
Prefetchable memory behind bridge: d8000000-d9ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at c000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at c400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at c800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 8363
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 11
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device 8363
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at cc00 [size=256]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at d400 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Surecom Technology EP-320X-R
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at dc00 [size=256]
Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e000 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at dc001000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at dc002000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: nVidia Corporation RIVA TNT2 Model 64 (rev 15) (prog-if 00 [VGA])
Subsystem: Palit Microsystems Inc.: Unknown device 002d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at da000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2,x4
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

Linux version 2.4.22 (root@tigger) (gcc version 3.2.3) #1 Sun Sep 28 11:53:06 CEST 2003
ksymoops 2.4.9 on i686 2.4.22. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.22/ (default)
-m /usr/src/linux/System.map (default)

Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.

Unable to handle kernel paging request at virtual address e7edf88c
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c023d154>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010202
eax: d68ee5fc ebx: d7edf800 ecx: 00000000 edx: 000005ea
esi: 00000000 edi: d68ee012 ebp: 000005ea esp: c03d1efc
ds: 0018 es: 0018 ss:0018
Process swapper (pid: 0, stackpage=c03d1000)
Stack: d68ee012 d678671c ooooo5ea d7edf8c0 00000008 000005ee 67182983 d6780000
00000001 d898e000 00000014 d7edd000 c023d5f9 d7edd000 d7edd160 d898e000
c03c7dc8 c03c7dc8 00000000 d7edd160 d6ae37c0 04000001 c03d1fa0 0000000b
Call Trace: [<c023d5f9>] [<c0108845>] [<c01089c4>] [<c0105360>] [<c010af98>]
[<c0105360>] [<c0105383>] [<c01053f2>] [<c0105000>]
Code: 3b 83 8c 00 00 00 89 83 88 00 00 00 0f 87 8d 00 00 00 8b 44

>>EIP; c023d154 <rtl8139_rx_interrupt+144/310> <=====

>>eax; d68ee5fc <_end+16494824/188142a8>
>>ebx; d7edf800 <_end+17a85a28/188142a8>
>>edi; d68ee012 <_end+1649423a/188142a8>
>>esp; c03d1efc <init_task_union+1efc/2000>

Trace; c023d5f9 <rtl8139_interrupt+119/130>
Trace; c0108845 <handle_IRQ_event+45/70>
Trace; c01089c4 <do_IRQ+64/a0>
Trace; c0105360 <default_idle+0/30>
Trace; c010af98 <call_do_IRQ+5/d>
Trace; c0105360 <default_idle+0/30>
Trace; c0105383 <default_idle+23/30>
Trace; c01053f2 <cpu_idle+42/60>
Trace; c0105000 <_stext+0/0>

Code; c023d154 <rtl8139_rx_interrupt+144/310>
00000000 <_EIP>:
Code; c023d154 <rtl8139_rx_interrupt+144/310> <=====
0: 3b 83 8c 00 00 00 cmp 0x8c(%ebx),%eax <=====
Code; c023d15a <rtl8139_rx_interrupt+14a/310>
6: 89 83 88 00 00 00 mov %eax,0x88(%ebx)
Code; c023d160 <rtl8139_rx_interrupt+150/310>
c: 0f 87 8d 00 00 00 ja 9f <_EIP+0x9f>
Code; c023d166 <rtl8139_rx_interrupt+156/310>
12: 8b 44 00 00 mov 0x0(%eax,%eax,1),%eax

1 warning issued. Results may not be reliable.
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 3
model name : AMD Duron(tm) Processor
stepping : 1
cpu MHz : 751.349
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1497.49

If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

Linux tigger 2.4.22 #1 Sun Sep 28 11:53:06 CEST 2003 i686 unknown

Gnu C 3.2.3
Gnu make 3.80
util-linux 2.11w
mount 2.11w
modutils 2.4.19
e2fsprogs 1.29
reiserfsprogs 3.6.3
quota-tools 3.06.
PPP 2.4.1
Linux C Library 2.3.1
Dynamic linker (ldd) 2.3.1
Linux C++ Library 5.0.3
Procps 3.1.6
Net-tools 1.60
Kbd 1.06
Sh-utils 2.0
Modules Loaded es1371
ksymoops 2.4.9 on i686 2.4.22. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.22/ (default)
-m /usr/src/linux/System.map (default)

Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.

Unable to handle kernel paging request at virtual address e7edf88c
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c023d154>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010202
eax: d68ee5fc ebx: d7edf800 ecx: 00000000 edx: 000005ea
esi: 00000000 edi: d68ee012 ebp: 000005ea esp: c03d1efc
ds: 0018 es: 0018 ss:0018
Process swapper (pid: 0, stackpage=c03d1000)
Stack: d68ee012 d678671c ooooo5ea d7edf8c0 00000008 000005ee 67182983 d6780000
00000001 d898e000 00000014 d7edd000 c023d5f9 d7edd000 d7edd160 d898e000
c03c7dc8 c03c7dc8 00000000 d7edd160 d6ae37c0 04000001 c03d1fa0 0000000b
Call Trace: [<c023d5f9>] [<c0108845>] [<c01089c4>] [<c0105360>] [<c010af98>]
[<c0105360>] [<c0105383>] [<c01053f2>] [<c0105000>]
Code: 3b 83 8c 00 00 00 89 83 88 00 00 00 0f 87 8d 00 00 00 8b 44

>>EIP; c023d154 <rtl8139_rx_interrupt+144/310> <=====

>>eax; d68ee5fc <_end+16494824/188142a8>
>>ebx; d7edf800 <_end+17a85a28/188142a8>
>>edi; d68ee012 <_end+1649423a/188142a8>
>>esp; c03d1efc <init_task_union+1efc/2000>

Trace; c023d5f9 <rtl8139_interrupt+119/130>
Trace; c0108845 <handle_IRQ_event+45/70>
Trace; c01089c4 <do_IRQ+64/a0>
Trace; c0105360 <default_idle+0/30>
Trace; c010af98 <call_do_IRQ+5/d>
Trace; c0105360 <default_idle+0/30>
Trace; c0105383 <default_idle+23/30>
Trace; c01053f2 <cpu_idle+42/60>
Trace; c0105000 <_stext+0/0>

Code; c023d154 <rtl8139_rx_interrupt+144/310>
00000000 <_EIP>:
Code; c023d154 <rtl8139_rx_interrupt+144/310> <=====
0: 3b 83 8c 00 00 00 cmp 0x8c(%ebx),%eax <=====
Code; c023d15a <rtl8139_rx_interrupt+14a/310>
6: 89 83 88 00 00 00 mov %eax,0x88(%ebx)
Code; c023d160 <rtl8139_rx_interrupt+150/310>
c: 0f 87 8d 00 00 00 ja 9f <_EIP+0x9f>
Code; c023d166 <rtl8139_rx_interrupt+156/310>
12: 8b 44 00 00 mov 0x0(%eax,%eax,1),%eax

1 warning issued. Results may not be reliable.
Unable to handle kernel paging request at virtual address e7edf88c

*pde = 00000000

Oops: 0000

CPU: 0

EIP: 0010:[<c023d154>] Not tainted

EFLAGS: 00010202

eax: d68ee5fc ebx: d7edf800 ecx: 00000000 edx: 000005ea

esi: 00000000 edi: d68ee012 ebp: 000005ea esp: c03d1efc

ds: 0018 es: 0018 ss:0018

Process swapper (pid: 0, stackpage=c03d1000)

Stack: d68ee012 d678671c ooooo5ea d7edf8c0 00000008 000005ee 67182983 d6780000

00000001 d898e000 00000014 d7edd000 c023d5f9 d7edd000 d7edd160 d898e000

c03c7dc8 c03c7dc8 00000000 d7edd160 d6ae37c0 04000001 c03d1fa0 0000000b

Call Trace: [<c023d5f9>] [<c0108845>] [<c01089c4>] [<c0105360>] [<c010af98>]

[<c0105360>] [<c0105383>] [<c01053f2>] [<c0105000>]

Code: 3b 83 8c 00 00 00 89 83 88 00 00 00 0f 87 8d 00 00 00 8b 44

0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0330-0333 : MPU-401 UART
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
5000-500f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
6000-607f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
c000-c00f : VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
c000-c007 : ide0
c008-c00f : ide1
c400-c41f : VIA Technologies, Inc. USB
c800-c81f : VIA Technologies, Inc. USB (#2)
cc00-ccff : VIA Technologies, Inc. VT82C686 AC97 Audio Controller
cc00-ccff : via82cxxx_audio
d000-d003 : VIA Technologies, Inc. VT82C686 AC97 Audio Controller
d000-d003 : via82cxxx_audio
d400-d403 : VIA Technologies, Inc. VT82C686 AC97 Audio Controller
d400-d403 : via82cxxx_audio
dc00-dcff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
dc00-dcff : 8139too
e000-e03f : Ensoniq ES1371 [AudioPCI-97]
e000-e03f : es1371
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: LG Model: CD-ROM CRD-8520B Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: LITE-ON Model: LTR-48125S Rev: 1S01
Type: CD-ROM ANSI SCSI revision: 02

Next message: Erik Bourget: "Re: CMD680, kernel 2.4.21, and heartache"
Previous message: Manfred Spraul: "Re: [PATCH] [2/2] posix message queues"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]