Re: Linux 2.4.23-pre8

[Lukasz Trabinski]

In article <Pine.LNX.4.44.0310222116270.1364-100000@xxxxxxxxxx> you wrote:
> Chas Williams:
>  o [ATM]: rewrite recvmsg to use skb_copy_datagram_iovec
>  o [ATM]: remove listenq and backlog_quota from struct atm_vcc
>  o [ATM]: cleanup connect
>  o [ATM]: eliminate SOCKOPS_WRAPPED
>  o [ATM]: move vcc's to global sk-based linked list
>  o [ATM]: setsockopt/getsockopt cleanup

Well, ATM dosen't work for me. (from 2.4.22, 2.4.21 is OK).

No traffic via ATM interfeces.

[root@voices root]# ifconfig atm1
atm1      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:XXX.XX.XX.XXX  Mask:255.255.255.252
          UP RUNNING  MTU:9180  Metric:1
          RX packets:9 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:632 (632.0 b)  TX bytes:100 (100.0 b)

Counters on all atm interfeces are still the same

On good working kernel, during boot, i have messages like this:

atm_connect (TX: cl 1,bw 0-0,sdu 9188; RX: cl 1,bw 0-0,sdu 9188,AAL 5)
atm_connect (TX: cl 1,bw 0-0,sdu 9188; RX: cl 1,bw 0-0,sdu 9188,AAL 5)
atm_connect (TX: cl 1,bw 0-0,sdu 9188; RX: cl 1,bw 0-0,sdu 9188,AAL 5)
atm_connect (TX: cl 1,bw 0-0,sdu 9188; RX: cl 1,bw 0-0,sdu 9188,AAL 5)
atm_connect (TX: cl 1,bw 0-0,sdu 9188; RX: cl 1,bw 0-0,sdu 9188,AAL 5)

from 2.4.22 I haven't any messages like above, only:

nicstar0: PHY seems to be 155 Mbps.
nicstar0: MAC address 00:20:48:0E:B3:28

What's going on? I don't want test 2.6.* kernels on my routers.

-- 
*[ Łukasz Trąbiński ]*
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/