irq 11: nobody cared! and immediate oops in 2.6.0test9

From: Pau Aliagas
Date: Wed Oct 29 2003 - 17:37:43 EST



When I boot (with acpi=off because otherwise the laptop hangs) I get this
oops:

Oct 29 19:05:33 pau kernel: drivers/usb/core/usb.c: registered new driver
usbfs
Oct 29 19:05:33 pau kernel: drivers/usb/core/usb.c: registered new driver
hub
Oct 29 19:05:33 pau kernel: PCI: IRQ 0 for device 0000:00:10.3 doesn't
match PIRQ mask - try pci=usepirqmask
Oct 29 19:05:33 pau kernel: PCI: No IRQ known for interrupt pin D of
device 0000:00:10.3. Please try using pci=biosirq.
Oct 29 19:05:33 pau kernel: drivers/usb/core/hcd-pci.c: Found HC with no
IRQ. Check BIOS/PCI 0000:00:10.3 setup!
Oct 29 19:05:33 pau kernel: drivers/usb/host/uhci-hcd.c: USB Universal
Host Controller Interface driver v2.1
Oct 29 19:05:33 pau kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller
Oct 29 19:05:33 pau kernel: irq 11: nobody cared!
Oct 29 19:05:33 pau kernel: Call Trace:
Oct 29 19:05:33 pau kernel: [<c010d80a>] __report_bad_irq+0x2a/0x90
Oct 29 19:05:33 pau kernel: [<c010d8fc>] note_interrupt+0x6c/0xa0
Oct 29 19:05:33 pau kernel: [<c010dbdb>] do_IRQ+0x12b/0x140
Oct 29 19:05:33 pau kernel: [<c010be24>] common_interrupt+0x18/0x20
Oct 29 19:05:33 pau kernel: [<c0125fc0>] do_softirq+0x40/0xa0
Oct 29 19:05:33 pau kernel: [<c010dbb7>] do_IRQ+0x107/0x140
Oct 29 19:05:33 pau kernel: [<c010be24>] common_interrupt+0x18/0x20
Oct 29 19:05:33 pau kernel: [<c010e16c>] setup_irq+0x9c/0xf0
Oct 29 19:05:33 pau kernel: [<ee86c530>] usb_hcd_irq+0x0/0x60 [usbcore]
Oct 29 19:05:33 pau kernel: [<c010dc98>] request_irq+0xa8/0xe0
Oct 29 19:05:33 pau kernel: [<ee86fbdf>] usb_hcd_pci_probe+0x27f/0x4a0
[usbcore]
Oct 29 19:05:33 pau kernel: [<ee86c530>] usb_hcd_irq+0x0/0x60 [usbcore]
Oct 29 19:05:33 pau kernel: [<c01ab7c2>]
pci_device_probe_static+0x52/0x70
Oct 29 19:05:33 pau kernel: [<c01ab81b>] __pci_device_probe+0x3b/0x50
Oct 29 19:05:33 pau kernel: [<c01ab85c>] pci_device_probe+0x2c/0x50
Oct 29 19:05:33 pau kernel: [<c01ec74f>] bus_match+0x3f/0x70
Oct 29 19:05:33 pau kernel: [<c01ec879>] driver_attach+0x59/0x90
Oct 29 19:05:33 pau kernel: [<c01ecb1d>] bus_add_driver+0x8d/0xa0
Oct 29 19:05:33 pau kernel: [<c01ecf9f>] driver_register+0x2f/0x40
Oct 29 19:05:33 pau kernel: [<c01aba4c>] pci_register_driver+0x5c/0x90
Oct 29 19:05:33 pau kernel: [<ee8000e2>] uhci_hcd_init+0xe2/0x144
[uhci_hcd]
Oct 29 19:05:33 pau kernel: [<c0138e5c>] sys_init_module+0x12c/0x250
Oct 29 19:05:33 pau kernel: [<c010b465>] sysenter_past_esp+0x52/0x71
Oct 29 19:05:33 pau kernel:
Oct 29 19:05:33 pau kernel: handlers:
Oct 29 19:05:33 pau kernel: [<ee86c530>] (usb_hcd_irq+0x0/0x60 [usbcore])
Oct 29 19:05:33 pau kernel: Disabling IRQ #11
Oct 29 19:05:33 pau kernel: uhci_hcd 0000:00:10.0: irq 11, io base
00001200
Oct 29 19:05:33 pau kernel: uhci_hcd 0000:00:10.0: new USB bus registered,
assigned bus number 1
Oct 29 19:05:33 pau kernel: hub 1-0:1.0: USB hub found
Oct 29 19:05:33 pau kernel: hub 1-0:1.0: 2 ports detected
Oct 29 19:05:33 pau kernel: PCI: IRQ 0 for device 0000:00:10.1 doesn't
match PIRQ mask - try pci=usepirqmask
Oct 29 19:05:33 pau kernel: PCI: No IRQ known for interrupt pin B of
device 0000:00:10.1. Please try using pci=biosirq.
Oct 29 19:05:33 pau kernel: drivers/usb/core/hcd-pci.c: Found HC with no
IRQ. Check BIOS/PCI 0000:00:10.1 setup!
Oct 29 19:05:33 pau kernel: drivers/usb/core/usb.c: registered new driver
hid
Oct 29 19:05:33 pau kernel: drivers/usb/input/hid-core.c: v2.0:USB HID
core driver


--

Pau

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/