Intel E1000 and IDE problems

From: Teodor Iacob
Date: Wed Nov 19 2003 - 07:02:58 EST


Hello,

I recently put up 2 intel network adapters:
00:09.0 Ethernet controller: Intel Corp. 82545EM Gigabit Ethernet Controller (Copper) (rev 01)
00:0b.0 Ethernet controller: Intel Corp. 82545EM Gigabit Ethernet Controller (Copper) (rev 01)

( I replaced some Intel PRO1000 Desktop which I had before ) and now
I get serious problems with the hda disk:

Nov 19 12:42:28 firelog2 kernel: hda: status timeout: status=0x82 { Busy }
Nov 19 12:42:28 firelog2 kernel:
Nov 19 12:42:28 firelog2 kernel: hda: DMA disabled
Nov 19 12:42:28 firelog2 kernel: hda: drive not ready for command
Nov 19 12:42:33 firelog2 kernel: ide0: reset: success
Nov 19 12:43:53 firelog2 kernel: hda: status timeout: status=0x80 { Busy }
Nov 19 12:43:53 firelog2 kernel:
Nov 19 12:43:53 firelog2 kernel: hda: drive not ready for command
Nov 19 12:43:54 firelog2 kernel: ide0: reset: success
Nov 19 12:46:19 firelog2 kernel: hda: status timeout: status=0x80 { Busy }
Nov 19 12:46:19 firelog2 kernel:
Nov 19 12:46:19 firelog2 kernel: hda: drive not ready for command
Nov 19 12:46:19 firelog2 kernel: ide0: reset: success

>From time to time I cannot even boot the system ( even the e1000 module
is not loaded )

The kernel version is 2.4.22 and the intel driver version is : 5.2.20

( I was using the same intel driver and the same kernel version before with
Intel PRO1000 Desktop adapter )

Can anybody help me track down this? to see if it's something hardware related,
only software... is it DMA related?

Teo
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/