PROBLEM: 2.6.0-test11 Oops after resuming from sleep/hibernation

From: Naheed Vora
Date: Fri Nov 28 2003 - 05:24:12 EST

Next message: Andries . Brouwer: "Re: BUG (non-kernel), can hurt developers."
Previous message: Tim Cambrant: "Re: Strange behavior observed w.r.t 'su' command"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

[1.] One line summary of the problem:
Oops after resuming from sleep/hibernation

[2.] Full description of the problem/report:

2.6.0-test11 throws Oops when my laptop resumes after sleep mode or
hibernation. I am using APM (compiled in the kernel). I think this has
something to do with the wireless card/pcmcia as it happens only when
I have my wireless card(Orinoco) connected and on before put to sleep. In absense
of wireless card, there is no panic. Just before panic, I see lots of
messages scroll up followed by message, Bad Scheduling in Interrupts!
and then Panic.

Surprisingly I don't have anything in my syslog/messages. oops written
by hand from the terminal.

[3.] Keywords (i.e., modules, networking, kernel):
APM, pcmcia, orinoco_cs

[4.] Kernel version (from /proc/version):
Linux version 2.6.0-test11 (root@gnubird) (gcc version 3.3.2 (Debian)) #6 Thu Nov 27 01:27:14 PST 2003

[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)

Note: ksyms is not the one when Oops was generated but system was rebooted
and brought to same state as at the time of Oops.

ksymoops 2.4.9 on i686 2.6.0-test11. Options used
-V (default)
-k ksyms (specified)
-l /proc/modules (default)
-o /lib/modules/2.6.0-test11/ (default)
-m /boot/System.map-2.6.0-test11 (default)

Warning (read_ksyms): no kernel symbols in ksyms, is ksyms a valid ksyms
file?
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
pid:281 com:apmd
EIP: 0060:[<c011b740>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00000246
eax: 00000000 ebx: c03c6980 ecx: 00000000 edx: 00000000
esi: 0000000b edi: cb9106e0 ebp: 0000000b
ds: 007b es: 007b
cr0: 8005008b
cr2: 4015af98
cr3: 012eb000
cr4: 00000690
Warning (Oops_read): Code line not seen, dumping what data is available

>>EIP; c011b740 <panic+100/120> <=====

>>ebx; c03c6980 <buf.0+0/400>
>>edi; cb9106e0 <_end+b532088/3fc1f9a8>

2 warnings issued. Results may not be reliable.

[6.] A small shell script or example program which triggers the
problem (if possible)

None

[7.] Environment

Debian (sarge/unstable)

[7.1.] Software (add the output of the ver_linux script here)
Linux gnubird 2.6.0-test11 #6 Thu Nov 27 01:27:14 PST 2003 i686 GNU/Linux

Gnu C 3.3.2
Gnu make 3.80
util-linux 2.12
mount 2.12
module-init-tools 0.9.15-pre3
e2fsprogs 1.35-WIP
pcmcia-cs 3.2.5
PPP 2.4.2b3
nfs-utils 1.0.6
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.1.14
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0.91
Modules Loaded orinoco_cs vfat orinoco hermes msdos fat

[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 10
cpu MHz : 647.928
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1277.95

[7.3.] Module information (from /proc/modules):
orinoco_cs 6472 - - Live 0xccb42000
vfat 12544 - - Live 0xccb45000
orinoco 41580 - - Live 0xcc936000
hermes 7424 - - Live 0xcc919000
msdos 8672 - - Live 0xcc915000
fat 39456 - - Live 0xcc91d000

[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0100-013f : orinoco_cs
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
1000-103f : 0000:00:07.3
1040-105f : 0000:00:07.3
1800-183f : 0000:00:03.0
1800-183f : eepro100
1840-1847 : 0000:00:03.1
1850-185f : 0000:00:07.1
1850-1857 : ide0
1858-185f : ide1
1860-187f : 0000:00:07.2
2000-2fff : PCI Bus #01
2000-20ff : 0000:01:00.0
4000-40ff : PCI CardBus #02
4400-44ff : PCI CardBus #02
4800-48ff : PCI CardBus #06
4c00-4cff : PCI CardBus #06

00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000d0000-000d17ff : Extension ROM
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-0bfeffff : System RAM
00100000-002d6d16 : Kernel code
002d6d17-0038eeff : Kernel data
0bff0000-0bffebff : ACPI Tables
0bffec00-0bffffff : ACPI Non-volatile Storage
10000000-103fffff : PCI CardBus #02
10400000-107fffff : PCI CardBus #02
10800000-10bfffff : PCI CardBus #06
10c00000-10ffffff : PCI CardBus #06
50000000-50000fff : 0000:00:02.0
50000000-50000fff : yenta_socket
50100000-50100fff : 0000:00:02.1
50100000-50100fff : yenta_socket
60000000-60000fff : card services
f4000000-f40fffff : 0000:00:05.0
f4100000-f411ffff : 0000:00:03.0
f4120000-f4120fff : 0000:00:03.0
f4120000-f4120fff : eepro100
f4121000-f4121fff : 0000:00:03.1
f4122000-f4122fff : 0000:00:05.0
f4200000-f5ffffff : PCI Bus #01
f4200000-f4200fff : 0000:01:00.0
f5000000-f5ffffff : 0000:01:00.0
f8000000-fbffffff : 0000:00:00.0
fff80000-ffffffff : reserved

[7.5.] PCI information ('lspci -vvv' as root)
gnubird:/usr/src/linux-2.6.0-test11# lspci -vvv
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f4200000-f5ffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+

00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
Subsystem: IBM: Unknown device 0130
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 3
Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 10000000-103ff000 (prefetchable)
Memory window 1: 10400000-107ff000
I/O window 0: 00004000-000040ff
Memory window 1: 10400000-107ff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001

00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
Subsystem: IBM: Unknown device 0130
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 5
Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 10800000-10bff000 (prefetchable)
Memory window 1: 10c00000-10fff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001

00:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 09)
Subsystem: Intel Corp. EtherExpress PRO/100+ MiniPCI
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f4120000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 1800 [size=64]
Region 2: Memory at f4100000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem (prog-if 02 [16550])
Subsystem: Intel Corp.: Unknown device 2408
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 1840 [size=8]
Region 1: Memory at f4121000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
Subsystem: IBM: Unknown device 0153
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 6000ns max)
Interrupt: pin A routed to IRQ 3
Region 0: Memory at f4122000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 1850 [size=16]

00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 1860 [size=32]

00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9

01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) (prog-if 00 [VGA])
Subsystem: IBM ThinkPad A20m
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 3
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at f4200000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

[7.6.] SCSI information (from /proc/scsi/scsi)
None

[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):

gnubird:/usr/src/linux-2.6.0-test11# cat /proc/apm
1.16ac 1.2 0x03 0x01 0x03 0x09 80% -1 ?

[X.] Other notes, patches, fixes, workarounds:

gnubird:/usr/src/linux-2.6.0-test11/scripts# cat /proc/cmdline
root=/dev/hda7 acpi=off

Please CC me when replying to the list,
Thanks,
----
Naheed Vora

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Andries . Brouwer: "Re: BUG (non-kernel), can hurt developers."
Previous message: Tim Cambrant: "Re: Strange behavior observed w.r.t 'su' command"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]