2.6.0-test HD wakeup problems

From: Sid Boyce
Date: Sat Nov 29 2003 - 13:31:52 EST

Next message: Darren Dupre: ""DV failed to configure device" for Quantum DLT4000 tape drive on Adaptec 2940UW, 2.6.0-test11"
Previous message: Danny Brow: "Re: i875p"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I didn't have the problem with 2.6.0-test10-mm1, but I've had it with
all the Linus 2.6.0-test kernels. When left unattended for some hours,
the HD, monitor (some times) and USB fail to wake up. Athlon
XP2200+/512M/IDE HD/Geforce FX5200 128M using the modded NVIDIA driver.
With 2.6.0-test10-mm1 the HD spins up readily on hitting any key. ACPI
is set to off and I'm not using SWSUSP.
I don't see anywhere in the stuff below where it tries to wake up the HD
at 12:12 when I hit a key.

Nov 29 04:06:18 barrabas kernel: hdb: start_power_step(step: 0)
Nov 29 04:06:18 barrabas kernel: hdb: completing PM request, suspend
Nov 29 04:06:18 barrabas kernel: hda: start_power_step(step: 0)
Nov 29 04:06:18 barrabas kernel: hda: start_power_step(step: 1)
Nov 29 04:06:18 barrabas kernel: hda: complete_power_step(step: 1, stat:
50, err: 0)
Nov 29 04:06:18 barrabas kernel: hda: completing PM request, suspend
Nov 29 04:06:18 barrabas kernel: uhci_hcd 0000:00:11.3: suspend D0 --> D3
Nov 29 04:06:18 barrabas kernel: drivers/usb/host/uhci-hcd.c: a800:
suspend_hc
Nov 29 04:06:18 barrabas kernel: uhci_hcd 0000:00:11.2: suspend D0 --> D3
Nov 29 04:06:18 barrabas kernel: drivers/usb/host/uhci-hcd.c: b000:
suspend_hc
Nov 29 04:06:18 barrabas kernel: ehci_hcd 0000:00:09.2: suspend D0 --> D3
Nov 29 04:06:18 barrabas kernel: ehci_hcd 0000:00:09.2: suspend to 3
Nov 29 04:06:18 barrabas kernel: uhci_hcd 0000:00:09.1: suspend D0 --> D3
Nov 29 04:06:18 barrabas kernel: drivers/usb/host/uhci-hcd.c: d400:
suspend_hc
Nov 29 04:06:18 barrabas kernel: uhci_hcd 0000:00:09.0: suspend D0 --> D3
Nov 29 04:06:18 barrabas kernel: drivers/usb/host/uhci-hcd.c: d800:
suspend_hc
Nov 29 04:06:27 barrabas kernel: uhci_hcd 0000:00:09.0: resume from state D3
Nov 29 04:06:27 barrabas kernel: uhci_hcd 0000:00:09.1: resume from state D3
Nov 29 04:06:27 barrabas kernel: ehci_hcd 0000:00:09.2: resume from state D3
Nov 29 04:06:27 barrabas kernel: ehci_hcd 0000:00:09.2: resume
Nov 29 04:06:27 barrabas kernel: eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
Nov 29 04:06:27 barrabas kernel: uhci_hcd 0000:00:11.2: resume from state D3
Nov 29 04:06:27 barrabas kernel: uhci_hcd 0000:00:11.3: resume from state D3
Nov 29 04:06:27 barrabas kernel: hda: Wakeup request inited, waiting for
!BSY...
Nov 29 04:06:27 barrabas kernel: hda: start_power_step(step: 1000)
Nov 29 04:06:27 barrabas kernel: blk: queue df2a7df8, I/O limit 4095Mb
(mask 0xffffffff)
Nov 29 04:06:27 barrabas kernel: hda: completing PM request, resume
Nov 29 04:06:27 barrabas kernel: hdb: Wakeup request inited, waiting for
!BSY...
Nov 29 04:06:27 barrabas kernel: hdb: start_power_step(step: 1000)
Nov 29 04:06:27 barrabas kernel: hdb: completing PM request, resume
Nov 29 04:06:27 barrabas kernel: drivers/usb/host/uhci-hcd.c: d400:
wakeup_hc
Nov 29 04:06:27 barrabas kernel: drivers/usb/host/uhci-hcd.c: a800:
wakeup_hc
Nov 29 04:06:27 barrabas kernel: drivers/usb/host/uhci-hcd.c: d800:
wakeup_hc
Nov 29 04:06:27 barrabas kernel: drivers/usb/host/uhci-hcd.c: b000:
wakeup_hc
Nov 29 04:06:27 barrabas kernel: hub 4-2:1.0: transfer --> -84
Nov 29 04:06:29 barrabas last message repeated 4 times
Nov 29 04:06:29 barrabas kernel: drivers/usb/host/uhci-hcd.c: d400:
suspend_hc
Nov 29 04:06:29 barrabas kernel: drivers/usb/host/uhci-hcd.c: a800:
suspend_hc
Nov 29 04:06:29 barrabas kernel: drivers/usb/host/uhci-hcd.c: d800:
suspend_hc
Nov 29 04:06:29 barrabas kernel: hub 4-2:1.0: transfer --> -84
Nov 29 04:06:31 barrabas last message repeated 4 times
Nov 29 04:06:31 barrabas kernel: hub 4-2:1.0: resetting for error -84
Nov 29 04:06:31 barrabas kernel: usb 4-2.1: USB disconnect, address 3
Nov 29 04:06:31 barrabas kernel: usb 4-2.1: usb_disable_device nuking
all URBs
Nov 29 04:06:31 barrabas kernel: usb 4-2.1: unregistering interface
4-2.1:1.0
Nov 29 04:06:31 barrabas kernel: usb 4-2.1: hcd_unlink_urb d53cbf78 fail -22
Nov 29 04:06:31 barrabas kernel: usb 4-2.1: hcd_unlink_urb d588df78 fail -22
Nov 29 04:06:31 barrabas kernel: hub 4-2:1.0: transfer --> -84
Nov 29 04:06:32 barrabas last message repeated 3 times
Nov 29 04:06:33 barrabas kernel: drivers/usb/core/usb.c: usb_hotplug
Nov 29 04:06:33 barrabas kernel: usb 4-2.1: unregistering device
Nov 29 04:06:33 barrabas kernel: drivers/usb/core/usb.c: usb_hotplug
Nov 29 04:06:33 barrabas kernel: usb 4-2.2: USB disconnect, address 4
Nov 29 04:06:33 barrabas kernel: usb 4-2.2: usb_disable_device nuking
all URBs
Nov 29 04:06:33 barrabas kernel: usb 4-2.2: unregistering interface
4-2.2:1.0
Nov 29 04:06:33 barrabas kernel: drivers/usb/core/usb.c: usb_hotplug
Nov 29 04:06:33 barrabas kernel: usb 4-2.2: unregistering device
Nov 29 04:06:33 barrabas kernel: drivers/usb/core/usb.c: usb_hotplug
Nov 29 04:06:33 barrabas kernel: usb 4-2.4: USB disconnect, address 5
Nov 29 04:06:33 barrabas kernel: usb 4-2.4: usb_disable_device nuking
all URBs
Nov 29 04:06:33 barrabas kernel: usb 4-2.4: unregistering interface
4-2.4:1.0
Nov 29 04:06:33 barrabas kernel: usb 4-2.4: hcd_unlink_urb d527ef78 fail -22
Nov 29 04:06:33 barrabas kernel: usb 4-2.4: hcd_unlink_urb d54eaf78 fail -22
Nov 29 04:06:33 barrabas kernel: drivers/usb/core/usb.c: usb_hotplug
Nov 29 04:06:33 barrabas kernel: usb 4-2.4: unregistering device
Nov 29 04:06:33 barrabas kernel: drivers/usb/core/usb.c: usb_hotplug
Nov 29 04:06:33 barrabas kernel: usb 4-2.5: USB disconnect, address 6
Nov 29 04:06:33 barrabas kernel: usb 4-2.5: usb_disable_device nuking
all URBs
Nov 29 04:06:33 barrabas kernel: usb 4-2.5: unregistering interface
4-2.5:1.0
Nov 29 04:06:33 barrabas kernel: drivers/usb/core/file.c: removing 0 minor
Nov 29 04:06:33 barrabas kernel: drivers/usb/core/file.c:
release_usb_class_dev - lp0
<stuff deleted>
Nov 29 12:12:01 barrabas syslogd 1.4.1: restart.
Nov 29 12:12:03 barrabas /sbin/hotplug[789]: no runnable
/etc/hotplug/usb_host.agent is installed
Nov 29 12:12:03 barrabas /etc/hotplug/usb.rc[778]: loaded HCD: ehci-hcd
Nov 29 12:12:03 barrabas /sbin/hotplug[830]: no runnable
/etc/hotplug/usb_host.agent is installed
Nov 29 12:12:03 barrabas /sbin/hotplug[869]: no runnable
/etc/hotplug/usb_host.agent is installed
Nov 29 12:12:03 barrabas /sbin/hotplug[908]: no runnable
/etc/hotplug/usb_host.agent is installed
Nov 29 12:12:03 barrabas /sbin/hotplug[947]: no runnable
/etc/hotplug/usb_host.agent is installed
Nov 29 12:12:03 barrabas /etc/hotplug/usb.rc[778]: loaded HCD: uhci-hcd
Nov 29 12:12:03 barrabas /etc/hotplug/usb.rc[778]: loaded HCD: ehci-hcd
Nov 29 12:12:03 barrabas /etc/hotplug/usb.rc[778]: FATAL: Module
mousedev not found.
Nov 29 12:12:03 barrabas /etc/hotplug/usb.rc[778]: FATAL: Module keybdev
not found.
Nov 29 12:12:03 barrabas /etc/hotplug/usb.rc[778]: FATAL: Module printer
not found.
<HARDWARE RESET done>
Regards
Sid.

--
Sid Boyce .... Linux Only Shop.

--
Sid Boyce .... Linux Only Shop.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Darren Dupre: ""DV failed to configure device" for Quantum DLT4000 tape drive on Adaptec 2940UW, 2.6.0-test11"
Previous message: Danny Brow: "Re: i875p"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]