vt8235 ide0: Speed warnings UDMA 3/4/5 is not functional

[mikepolniak]

I have a new Shuttle MK40VN motherboard with VIA KM400 and VT8235. I have
tried kernel 2.6.0-test11 and 2.4.23 and only can get UDMA2 working on my
hard drive.

If i try hdparm -X69 -d 1 /dev/hda i get the speed warnings:

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming
33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE
controller at PCI slot 0000:00:11.1 VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235
(rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1:
    BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11
 p12 >
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX
as
device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices Linux video
capture interface: v1.00
ide0: Speed warnings UDMA 3/4/5 is not functional. ide0: Speed warnings
UDMA 3/4/5 is not functional. ide0: Speed warnings UDMA 3/4/5 is not
functional.
-- 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/