RE: ACPI Bug: 2.6.0-test11, Incomplete pci bus scan

[Brown, Len]

Andrew,
This may be a duplicate of a dual P3 serverworks failure:
http://bugzilla.kernel.org/show_bug.cgi?id=1585

But as I've got no feedback on that bug, feel free to file a new one --
worst case we'll end up closing it as a dupe when we get to the bottom
of it.

Thanks,
-Len

How to file a bug against ACPI:

http://bugzilla.kernel.org/
Category: Power Management
Component: ACPI

Please attach the output from dmidecode, available in /usr/sbin/, or
here: 
http://www.nongnu.org/dmidecode/

Please attach the output from acpidmp, available in /usr/sbin/, or in
here
http://www.intel.com/technology/iapc/acpi/downloads/pmtools-20010730.tar
.gz

Please attach /proc/interrupts and the dmesg output showing the failure,
if possible.

> -----Original Message-----
> From: Andrew Walrond [mailto:andrew@xxxxxxxxxxx] 
> Sent: Tuesday, December 09, 2003 3:03 PM
> To: linux-kernel@xxxxxxxxxxxxxxx
> Cc: Brown, Len
> Subject: ACPI Bug: 2.6.0-test11, Incomplete pci bus scan
> 
> 
> Asus PR-DLS Dual Xeon (P4) motherboard
> 
> 2.6.0-test11 kernel with acpi configured.
> 
> If I boot normally, the e1000 device is not recognised.
> If I boot with pci=noacpi, the e1000 is recognised ( but 
> e100/e1000 are 
> assigned opposite ethx compared to 2.4)
> 
> lspci in both cases gives these devices
> 
> 00:00.0 Host bridge: ServerWorks CMIC-LE (rev 13)
> 00:00.1 Host bridge: ServerWorks CMIC-LE
> 00:00.2 Host bridge: ServerWorks: Unknown device 0000
> 00:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet 
> Pro 100] (rev 10)
> 00:03.0 VGA compatible controller: ATI Technologies Inc Rage 
> XL (rev 27)
> 00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93)
> 00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93)
> 00:0f.3 Host bridge: ServerWorks GCLE Host Bridge
> 00:10.0 Host bridge: ServerWorks: Unknown device 0101 (rev 03)
> 00:10.2 Host bridge: ServerWorks: Unknown device 0101 (rev 03)
> 00:11.0 Host bridge: ServerWorks: Unknown device 0101 (rev 03)
> 00:11.2 Host bridge: ServerWorks: Unknown device 0101 (rev 03)
> 
> But these extra devices only appear when booting with 
> pci=noacpi. Net access 
> to a machine can also be arranged if it would help
> 
> 02:04.0 SCSI storage controller: LSI Logic / Symbios Logic 
> 53c1030 (rev 07)
> 02:04.1 SCSI storage controller: LSI Logic / Symbios Logic 
> 53c1030 (rev 07)
> 03:02.0 Ethernet controller: Intel Corp. 82544GC Gigabit 
> Ethernet Controller 
> (LOM) (rev 02)
> 
> If I can give any further info, let me know.
> 
> As a seperate issue, with pci=noacpi, both the net interfaces 
> are recognised, 
> but in reverse order to 2.4 kernel (eth0 <=> eth1)
> 
> Andrew Walrond
> 
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/