another oops, maybe I'll downgrade to 2.4.22.. :(

From: Cristiano De Michele
Date: Sat Dec 13 2003 - 19:28:01 EST

Next message: Andre Hedrick: "Linux, Inc. (Re: Linux GPL and binary module exception clause?)"
Previous message: Daniel Jacobowitz: "RAID5 recovery quirk (?) on 2.6.0-test9"
Next in thread: Jose Luis Domingo Lopez: "Re: another oops, maybe I'll downgrade to 2.4.22.. :("
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,
another oops got using kernel 2.4.23 caused to gkrellm
I'm on debian unstable up to date

c012c2ae
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c012c2ae>] Tainted: P
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00210282
eax: 5a7fbd58 ebx: c6b0bf90 ecx: c158e0c0 edx: d67fbd7c
esi: 00001000 edi: dc7f1614 ebp: cf9b7c3c esp: cf9b7c1c
ds: 0018 es: 0018 ss: 0018
Process gkrellm (pid: 18516, stackpage=cf9b7000)
Stack: c6b0bf90 c6b0b9ec 00009000 408c3000 c6b0b6f4 dc7f1614 cf9b6000 dc7f1614
cf9b7c50 c011a0a8 dc7f1614 00000080 de8af0c4 cf9b7c74 c0143883 dc7f1614
cf9b7ed0 00000000 dc7f1614 00000000 cf9b6000 dd1bb580 cf9b7c98 c014394b
Call Trace: [<c011a0a8>] [<c0143883>] [<c014394b>] [<c0158872>] [<c016650a>]
[<c016cde3>] [<c0135672>] [<c0158560>] [<c0143f97>] [<c014339b>] [<c0144162>]
[<c01079bf>] [<c010900f>]
Code: 89 10 89 1c 24 e8 b8 ec ff ff 8b 45 ec 89 74 24 08 89 3c 24

>>EIP; c012c2ae <exit_mmap+9e/140> <=====

>>ebx; c6b0bf90 <_end+677a6bc/2051d7ac>
>>ecx; c158e0c0 <_end+11fc7ec/2051d7ac>
>>edx; d67fbd7c <_end+1646a4a8/2051d7ac>
>>edi; dc7f1614 <_end+1c45fd40/2051d7ac>
>>ebp; cf9b7c3c <_end+f626368/2051d7ac>
>>esp; cf9b7c1c <_end+f626348/2051d7ac>

Trace; c011a0a8 <mmput+48/a0>
Trace; c0143883 <exec_mmap+c3/f0>
Trace; c014394b <flush_old_exec+9b/290>
Trace; c0158872 <load_elf_binary+312/d50>
Trace; c016650a <ext3_do_update_inode+17a/3f0>
Trace; c016cde3 <journal_get_write_access+53/70>
Trace; c0135672 <__alloc_pages+62/240>
Trace; c0158560 <load_elf_binary+0/d50>
Trace; c0143f97 <search_binary_handler+107/190>
Trace; c014339b <copy_strings+17b/1f0>
Trace; c0144162 <do_execve+142/1d0>
Trace; c01079bf <sys_execve+3f/70>
Trace; c010900f <system_call+33/38>

Code; c012c2ae <exit_mmap+9e/140>
00000000 <_EIP>:
Code; c012c2ae <exit_mmap+9e/140> <=====
0: 89 10 mov %edx,(%eax) <=====
Code; c012c2b0 <exit_mmap+a0/140>
2: 89 1c 24 mov %ebx,(%esp,1)
Code; c012c2b3 <exit_mmap+a3/140>
5: e8 b8 ec ff ff call ffffecc2 <_EIP+0xffffecc2>
Code; c012c2b8 <exit_mmap+a8/140>
a: 8b 45 ec mov 0xffffffec(%ebp),%eax
Code; c012c2bb <exit_mmap+ab/140>
d: 89 74 24 08 mov %esi,0x8(%esp,1)
Code; c012c2bf <exit_mmap+af/140>
11: 89 3c 24 mov %edi,(%esp,1)

and cat /proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) XP 1700+
stepping : 2
cpu MHz : 1470.019
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 2936.01

cat /proc/version:
Linux version 2.4.23 (root@cripat) (gcc version 3.3.2 (Debian)) #1 Sat
Nov 29 13:39:54 CET 2003

cat /proc/modules:

printer 7264 0 (unused)
input 3424 0 (autoclean)
audio 41976 0 (unused)
agpgart 14000 3 (autoclean)
nvidia 1630112 11 (autoclean)
ip_nat_irc 2160 0 (unused)
ip_conntrack_irc 3120 1
ip_conntrack_ftp 3952 1 (autoclean)
ip_nat_ftp 2800 0 (unused)
ipt_unclean 6968 0 (unused)
ipt_state 568 10
ipt_REJECT 3512 0 (unused)
ipt_REDIRECT 760 0 (unused)
ipt_multiport 696 5
ipt_MIRROR 1304 0 (unused)
ipt_MASQUERADE 1368 1
ipt_LOG 3512 0 (unused)
ipt_limit 920 0 (unused)
iptable_nat 15726 3 [ip_nat_irc ip_nat_ftp ipt_REDIRECT
ipt_MASQUERADE]
iptable_mangle 2168 0 (unused)
iptable_filter 1740 1
ip_queue 5712 0 (unused)
ip_tables 12032 14 [ipt_unclean ipt_state ipt_REJECT
ipt_REDIRECT ipt_multiport ipt_MIRROR ipt_MASQUERADE ipt_LOG ipt_limit
iptable_nat iptable_mangle iptable_filter]
parport_pc 15556 1 (autoclean)
lp 6592 0 (autoclean)
parport 25608 1 (autoclean) [parport_pc lp]
ppp_deflate 3480 0 (autoclean)
zlib_inflate 18436 0 (autoclean) [ppp_deflate]
zlib_deflate 18040 0 (autoclean) [ppp_deflate]
bsd_comp 4120 0 (autoclean)
ppp_async 7488 1 (autoclean)
snd-seq-oss 28896 0 (unused)
snd-seq-midi-event 3296 0 [snd-seq-oss]
snd-seq 36368 2 [snd-seq-oss snd-seq-midi-event]
snd-pcm-oss 37572 1
snd-mixer-oss 12976 1 [snd-pcm-oss]
snd-via82xx 13600 3
snd-pcm 59812 0 [snd-pcm-oss snd-via82xx]
snd-timer 14404 0 [snd-seq snd-pcm]
snd-ac97-codec 42296 0 [snd-via82xx]
snd-page-alloc 6228 0 [snd-via82xx snd-pcm]
gameport 1644 0 [snd-via82xx]
snd-mpu401-uart 3376 0 [snd-via82xx]
snd-rawmidi 13568 0 [snd-mpu401-uart]
snd-seq-device 4240 0 [snd-seq-oss snd-seq snd-rawmidi]
snd 32644 1 [snd-seq-oss snd-seq-midi-event snd-seq
snd-pcm-oss snd-mixer-oss snd-via82xx snd-pcm snd-timer snd-ac97-codec
snd-mpu401-uart snd-rawmidi snd-seq-device]
uhci 25340 0 (unused)
tun 4224 0 (unused)
8139too 16168 1
mii 2464 0 [8139too]
crc32 2880 0 [8139too]
3c59x 26128 1
nls_cp437 4380 0 (unused)
thermal 6372 0 (unused)
ac 1856 0 (unused)
fan 1664 0 (unused)
processor 8504 0 [thermal]
quickcam 115104 0
usbcore 62092 1 [printer audio uhci quickcam]
videodev 6496 1 [quickcam]
rtc 6824 0 (autoclean)

cat /proc/ioports:

0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
d000-d0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
d000-d0ff : 8139too
d400-d43f : 3Com Corporation 3c900 Combo [Boomerang]
d400-d43f : 00:0b.0
d800-d80f : VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C
PIPC Bus Master IDE
d800-d807 : ide0
d808-d80f : ide1
dc00-dc1f : VIA Technologies, Inc. USB
dc00-dc1f : usb-uhci
e000-e01f : VIA Technologies, Inc. USB (#2)
e000-e01f : usb-uhci
e800-e8ff : VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller
e800-e8ff : VIA8233

cat /proc/iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-002a7c2b : Kernel code
002a7c2c-0033c49f : Kernel data
1fff0000-1fff2fff : ACPI Non-volatile Storage
1fff3000-1fffffff : ACPI Tables
e0000000-e7ffffff : PCI Bus #01
e0000000-e7ffffff : nVidia Corporation NV10 [GeForce 256 SDR]
e8000000-e9ffffff : PCI Bus #01
e8000000-e8ffffff : nVidia Corporation NV10 [GeForce 256 SDR]
ea000000-eaffffff : VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333]
ec000000-ec0000ff : Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+
ec000000-ec0000ff : 8139too
ffff0000-ffffffff : reserved

lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at ea000000 (32-bit, prefetchable) [size=16M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit-
FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: e0000000-e7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Unex Technology Corp. ND010
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at ec000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-

00:0b.0 Ethernet controller: 3Com Corporation 3c900 Combo [Boomerang]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 2000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d400 [size=64]
Expansion ROM at <unassigned> [disabled] [size=64K]

00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
Subsystem: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at d800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 1b) (prog-if 00
[UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 1b) (prog-if 00
[UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235 AC97 Audio Controller (rev 30)
Subsystem: Avance Logic Inc.: Unknown device 4710
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at e800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: nVidia Corporation NV10 [GeForce 256
SDR] (rev 10) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit-
FW+ AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
--
Cristiano De Michele,
Department of Physics,
University "Federico II" of Naples
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Andre Hedrick: "Linux, Inc. (Re: Linux GPL and binary module exception clause?)"
Previous message: Daniel Jacobowitz: "RAID5 recovery quirk (?) on 2.6.0-test9"
Next in thread: Jose Luis Domingo Lopez: "Re: another oops, maybe I'll downgrade to 2.4.22.. :("
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]