Re: What's dying here?

From: Ryan Dooley
Date: Tue Jan 06 2004 - 10:46:26 EST

That looks like the drive. Ran into much the same thing here not too long
ago.

Regards,
Ryan

>
> While trying to untar 2.6.1-rc1 my machine hung up. A dmesg gave me
> this:
>
>
> scsi1:0:0:0: Attempting to queue an ABORT message
> CDB: 0x2a 0x0 0x3 0x66 0xcb 0xf 0x0 0x4 0x0 0x0
> scsi1: At time of recovery, card was not paused
> >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
> scsi1: Dumping Card State while idle, at SEQADDR 0x7
> Card was paused
> ACCUM = 0xbe, SINDEX = 0x9, DINDEX = 0x8c, ARG_2 = 0x0
> HCNT = 0x0 SCBPTR = 0x6
> SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]
> SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0x0] SEQCTL[0x10]
> SEQ_FLAGS[0xc0] SSTAT0[0x5] SSTAT1[0xa] SSTAT2[0x0]
> SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4] SXFRCTL0[0x80]
> DFCNTRL[0x0] DFSTATUS[0x29]
> STACK: 0x37 0x169 0x10c 0x3
> SCB count = 116
> Kernel NEXTQSCB = 2
> Card NEXTQSCB = 2
> QINFIFO entries:
> Waiting Queue entries:
> Disconnected Queue entries:
> QOUTFIFO entries:
> Sequencer Free SCB List: 6 8 7 15 3 12 0 13 11 10 4 9 2 1 5 14
> Sequencer SCB Info:
> 0 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 1 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 2 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 3 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 4 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 5 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 6 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 7 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 8 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 9 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 10 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 11 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 12 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 13 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 14 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 15 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> Pending list:
> 26 SCB_CONTROL[0x64] SCB_SCSIID[0x7] SCB_LUN[0x0]
> Kernel Free SCB list: 9 6 3 18 39 54 11 23 0 56 51 63 15 62 22 27 59 16 1 31 36 40 50 24 58 55 12 13 4 34 33 14 114 57 32 38 25 48 37 30 17 20 53 52 49 7 60 8 61 29 28 35 46 5 47 21 10 41 19 43 45 44 42 67 115 108 109 110 111 104 105 106 107 100 101 102 103 96 97 98 99 92 93 94 95 88 89 90 91 84 85 86 87 80 81 82 83 76 77 78 79 72 73 74 75 68 69 70 71 64 65 66 113 112
> DevQ(0:0:0): 0 waiting
>
> <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
> (scsi1:A:0:0): Device is disconnected, re-queuing SCB
> Recovery code sleeping
> (scsi1:A:0:0): Abort Tag Message Sent
> (scsi1:A:0:0): SCB 26 - Abort Tag Completed.
> Recovery SCB completes
> Recovery code awake
> aic7xxx_abort returns 0x2002
> scsi1:0:0:0: Attempting to queue an ABORT message
> CDB: 0x28 0x0 0x3 0x4b 0xe8 0x6f 0x0 0x1 0x0 0x0
> scsi1: At time of recovery, card was not paused
> >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
> scsi1: Dumping Card State while idle, at SEQADDR 0x7
> Card was paused
> ACCUM = 0xbb, SINDEX = 0x64, DINDEX = 0x65, ARG_2 = 0xe
> HCNT = 0x0 SCBPTR = 0x2
> SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]
> SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0x0] SEQCTL[0x10]
> SEQ_FLAGS[0xc0] SSTAT0[0x5] SSTAT1[0xa] SSTAT2[0x0]
> SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4] SXFRCTL0[0x80]
> DFCNTRL[0x0] DFSTATUS[0x2d]
> STACK: 0xe4 0x169 0x199 0x3
> SCB count = 116
> Kernel NEXTQSCB = 25
> Card NEXTQSCB = 25
> QINFIFO entries:
> Waiting Queue entries:
> Disconnected Queue entries: 2:56
> QOUTFIFO entries:
> Sequencer Free SCB List: 5 10 11 7 12 3 1 4 13 6 9 0 15 8 14
> Sequencer SCB Info:
> 0 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 1 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 2 SCB_CONTROL[0x64] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0x38]
> 3 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 4 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 5 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 6 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 7 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 8 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 9 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 10 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 11 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 12 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 13 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 14 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> 15 SCB_CONTROL[0xe0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
> Pending list:
> 56 SCB_CONTROL[0x60] SCB_SCSIID[0x7] SCB_LUN[0x0]
> Kernel Free SCB list: 27 39 50 2 18 63 52 59 17 13 20 40 58 48 15 54 49 37 33 0 57 23 8 6 16 32 36 26 1 22 30 51 4 12 7 24 3 38 14 60 62 114 53 31 55 34 9 11 61 29 28 35 46 5 47 21 10 41 19 43 45 44 42 67 115 108 109 110 111 104 105 106 107 100 101 102 103 96 97 98 99 92 93 94 95 88 89 90 91 84 85 86 87 80 81 82 83 76 77 78 79 72 73 74 75 68 69 70 71 64 65 66 113 112
> DevQ(0:0:0): 0 waiting
>
> <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
> (scsi1:A:0:0): Device is disconnected, re-queuing SCB
> Recovery code sleeping
> (scsi1:A:0:0): Abort Tag Message Sent
> (scsi1:A:0:0): SCB 56 - Abort Tag Completed.
> Recovery SCB completes
> Recovery code awake
> aic7xxx_abort returns 0x2002
>
>
> lspci gives me this:
> 02:04.0 SCSI storage controller: Adaptec AHA-3940U/UW/UWD / AIC-7882U
> Flags: bus master, medium devsel, latency 64, IRQ 17
> I/O ports at 2000 [disabled] [size=256]
> Memory at ea000000 (32-bit, non-prefetchable) [size=4K]
> Expansion ROM at <unassigned> [disabled] [size=64K]
>
> The disk is a 36Gig Seagate.
>
>
> Would this be a dying disk, dying scsi controller or just a bug?
> :wq!
> ---------------------------------------------------------------------------
> Robert L. Harris | GPG Key ID: E344DA3B
> @ x-hkp://pgp.mit.edu
> DISCLAIMER:
> These are MY OPINIONS ALONE. I speak for no-one else.
>
> Life is not a destination, it's a journey.
> Microsoft produces 15 car pileups on the highway.
> Don't stop traffic to stand and gawk at the tragedy.
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/