Here are the bootlog (of working boot, ask me if you need the one of the non working one because I must copy it by hand) and lspci -vvvJon
Dec 9 20:41:46 pici kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Dec 9 20:41:46 pici kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Dec 9 20:41:46 pici kernel: ide2: I/O resource 0x3EE-0x3EE not free.
Dec 9 20:41:46 pici kernel: ide2: ports already in use, skipping probe
Dec 9 20:41:46 pici kernel: libata version 0.81 loaded.
Dec 9 20:41:46 pici kernel: ata_piix version 0.95
Dec 9 20:41:46 pici kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Dec 9 20:41:46 pici kernel: ata1: SATA max UDMA/133 cmd 0xEF88 ctl 0xEF86 bmdma 0xEE60 irq 18
Dec 9 20:41:46 pici kernel: ata2: SATA max UDMA/133 cmd 0xEF68 ctl 0xEF82 bmdma 0xEE68 irq 18
Dec 9 20:41:46 pici kernel: ata1: SATA port has no device. disabling.
Dec 9 20:41:46 pici kernel: ata1: thread exiting
Dec 9 20:41:46 pici kernel: scsi0 : ata_piix
Dec 9 20:41:46 pici kernel: ata2: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c49 86:3a01 87:4003 88:207f
Dec 9 20:41:46 pici kernel: ata2: dev 0 ATA, max UDMA/133, 240121728 sectors
Dec 9 20:41:46 pici kernel: ata2: dev 0 configured for UDMA/133
Dec 9 20:41:46 pici kernel: scsi1 : ata_piix
Dec 9 20:41:46 pici kernel: Vendor: ATA Model: Maxtor 6Y120M0 Rev: 0.81
Dec 9 20:41:46 pici kernel: Type: Direct-Access ANSI SCSI revision: 05
Dec 9 20:41:46 pici kernel: SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
Dec 9 20:41:46 pici kernel: SCSI device sda: drive cache: write through
Dec 9 20:41:46 pici kernel: sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3
Dec 9 20:41:46 pici kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
Dec 9 20:41:46 pici kernel: Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0
00:1f.1 IDE interface: Intel Corp.: Unknown device 24db (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at efe0 [size=8]
Region 1: I/O ports at efac [size=4]
Region 2: I/O ports at efa0 [size=8]
Region 3: I/O ports at efa8 [size=4]
Region 4: I/O ports at ef90 [size=16]
Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
00:1f.2 IDE interface: Intel Corp.: Unknown device 24d1 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at ef88 [size=8]
Region 1: I/O ports at ef84 [size=4]
Region 2: I/O ports at ef68 [size=8]
Region 3: I/O ports at ef80 [size=4]
Region 4: I/O ports at ee60 [size=16]