Re: DMA problem

From: claude parisot
Date: Fri Jan 16 2004 - 15:11:18 EST


Wes Janzen a écrit :
If those options don't work, you might try dropping down the dma mode by one. I have a Maxtor drive that does something like that with my Promise PDC20269 when trying to use UDMA 2, but it works fine in UDMA 1.

-Wes-

I tried it in the bios, all sorts of DMA , but nothing is working ....

Andreas Unterkircher wrote:

Is it possible that your ide-cable can't handle the higher dma speeds
and makes errors? is it udma compatible? have you looked for a
firmware update for the burner @ www.plextor.com?

andreas


----- Original Message ----- From: "claude parisot" <Claude.PARISOT@xxxxxxxxxx>
To: <linux-kernel@xxxxxxxxxxxxxxx>
Cc: <Claude.PARISOT@xxxxxxxxxx>
Sent: Friday, January 16, 2004 8:24 PM
Subject: DMA problem




Hello !

Sorry to post a seconfd message on the list, I am only trying
to get an answern for this - it seems so - DMA-problem ??


I have some
problems with a brand new Plextor-drive, PX-W5224TA/T3B, I cannot
mount any CD or burn a CDR or CD-RW, except if I disable DMA with
following command :# hdparm -d0 /dev/hdd , a little bit annoying,
isn't it ?

If I insert a cdrom in the drive the led doesn't go out, it flashes
as usual but it stays green.

It seems to be a DMA-problem or a kernel-bug ???
Its only a supposition, I am a Linux-newbie, and I am looking
for an explanation and a solution ....

By mounting a cdrom I get following error messages :

Jan 11 20:46:00 ishwara kernel: scsi : aborting command due to timeout
: pid 102, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00 00 01 00
Jan 11 20:46:00 ishwara kernel: hdd: error waiting for DMA
Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry: status=0x7f {
DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index
Error } Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry:
error=0x7f Jan 11 20:46:00 ishwara kernel: hdd: DMA disabled
Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
Jan 11 20:46:07 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
Jan 11 20:46:07 ishwara kernel: scsi0 channel 0 : resetting for second
half of retries. Jan 11 20:46:07 ishwara kernel: SCSI bus is being reset
for host 0 channel 0. Jan 11 20:46:07 ishwara kernel: hdd: status
timeout: status=0x80 { Busy } Jan 11 20:46:07 ishwara kernel: hdd: drive
not ready for command Jan 11 20:46:07 ishwara kernel: hdd: ATAPI reset
complete Jan 11 20:46:32 ishwara kernel: scsi : aborting command due to
timeout : pid 103, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00
rive not ready for command

And then I have a freeze or at least a blocking of the sysem.
I have to reboot.

Could someone give me an explanation of what is happening and a way to
solve the problem .... is this a kernel-bug ? Or an incompatibility
between the motherboard and the drive ??

If you choose to help me, please don't be to esoteric, as I already
said, I am a newbie.

Please, could you Cc all answers to the adress :

Claude.PARISOT@xxxxxxxxxx

My apologizes for my english ....


Claude

System : Pentium 2,8C
Asus P4P800 DeLuxe
Intel I865PE




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/