[OOPS] 2.4.24+XFS+grsecurity2+SATA+HIPAC

From: Marek Habersack
Date: Wed Jan 21 2004 - 13:51:06 EST


Hello,

As you can see, it's a heavily patched kernel running on the following
hardware:

P4, 2GB of RAM, 2x80GB SATA drives on the ICH5R chipset SATA controller:

$ lspci
00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02)
00:1f.3 SMBus: Intel Corp. 82801EB SMBus Controller (rev 02)
02:09.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
02:0a.0 Ethernet controller: Intel Corp.: Unknown device 1013
02:0b.0 Ethernet controller: Intel Corp.: Unknown device 1013

The software config is in short:

softraid (all partitions, including /),sata,hipac packet filter,xfs on all
partitions except / which has ext3.

The oops happens shortly after booting the machine and results in
broken raid (up to the point no raid partition mounts except for /) and,
once, in slightly messed up data on /. The oops is as follows:

-------
ksymoops 2.4.9 on i686 2.4.24-xfs-gr2-sata-hipac-p4-up. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.24-xfs-gr2-sata-hipac-p4-up/ (default)
-m /boot/System.map-2.4.24-xfs-gr2-sata-hipac-p4-up (default)

Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.

Unable to handle kernel paging request at virtual address a6069a94
c01c5010
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c01c5010>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: f7153800 ebx: f352c000 ecx: 00000079 edx: a6069a80
esi: fffffff7 edi: 00000002 ebp: 59bfec1c esp: f352df94
ds: 0018 es: 0018 ss: 0018
Process mysqld (pid: 3725, stackpage=f352d000)
Stack: c01c3e85 00000003 00000022 ffffffff 00000000 f352c000 00000006 f352c000
59bfec04 00000002 59bfec1c c01935d3 00000079 00000000 00000000 59bfec04
00000002 59bfec1c 0000008c 0000002b 0000002b 0000008c 25739315 00000023
Call Trace: [<c01c3e85>] [<c01935d3>]
Code: ff 42 14 89 d0 c3 8d 76 00 8d bc 27 00 00 00 00 8b 4c 24 04


>>EIP; c01c5010 <fget+20/30> <=====

>>eax; f7153800 <_end+36d73bf8/384b6458>
>>ebx; f352c000 <_end+3314c3f8/384b6458>
>>esp; f352df94 <_end+3314e38c/384b6458>

Trace; c01c3e85 <sys_llseek+15/c0>
Trace; c01935d3 <system_call+33/40>

Code; c01c5010 <fget+20/30>
00000000 <_EIP>:
Code; c01c5010 <fget+20/30> <=====
0: ff 42 14 incl 0x14(%edx) <=====
Code; c01c5013 <fget+23/30>
3: 89 d0 mov %edx,%eax
Code; c01c5015 <fget+25/30>
5: c3 ret
Code; c01c5016 <fget+26/30>
6: 8d 76 00 lea 0x0(%esi),%esi
Code; c01c5019 <fget+29/30>
9: 8d bc 27 00 00 00 00 lea 0x0(%edi,1),%edi
Code; c01c5020 <put_filp+0/40>
10: 8b 4c 24 04 mov 0x4(%esp,1),%ecx

<1>Unable to handle kernel paging request at virtual address 0002e476
c01c35c7
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c01c35c7>] Not tainted
EFLAGS: 00010282
eax: f7153800 ebx: 0002e462 ecx: 00000003 edx: 0002e462
esi: f7169980 edi: f7169980 ebp: 00000004 esp: f7057e80
ds: 0018 es: 0018 ss: 0018
Process mysqld (pid: 625, stackpage=f7057000)
Stack: f5e95900 f7169980 000000ff 00000078 f7169980 c01a3574 0002e462 f7169980
f7aa2c80 00000000 f7056000 00000009 c01a3c77 f7169980 00000009 f7056000
00000000 f7057f08 00000009 c01aa18c 00000009 c01aa365 00000009 00000009
Call Trace: [<c01a3574>] [<c01a3c77>] [<c01aa18c>] [<c01aa365>] [<c019330a>]
[<c01d426c>] [<c01d4070>] [<c030c784>] [<c0191d06>] [<c019d925>] [<c01a464d>]
[<c0192506>] [<c01935d3>]
Code: 8b 43 14 85 c0 74 52 8b 43 10 31 ff 85 c0 74 07 8b 50 24 85


>>EIP; c01c35c7 <filp_close+17/80> <=====

>>eax; f7153800 <_end+36d73bf8/384b6458>
>>esi; f7169980 <_end+36d89d78/384b6458>
>>edi; f7169980 <_end+36d89d78/384b6458>
>>esp; f7057e80 <_end+36c78278/384b6458>

Trace; c01a3574 <put_files_struct+64/d0>
Trace; c01a3c77 <do_exit+b7/280>
Trace; c01aa18c <sig_exit+ac/b0>
Trace; c01aa365 <dequeue_signal+65/d0>
Trace; c019330a <do_signal+1ca/2c0>
Trace; c01d426c <sys_getdents64+ac/c0>
Trace; c01d4070 <filldir64+0/150>
Trace; c030c784 <netif_receive_skb+c4/190>
Trace; c0191d06 <__switch_to+26/d0>
Trace; c019d925 <schedule+215/350>
Trace; c01a464d <do_setitimer+ed/110>
Trace; c0192506 <sys_rt_sigsuspend+c6/e0>
Trace; c01935d3 <system_call+33/40>

Code; c01c35c7 <filp_close+17/80>
00000000 <_EIP>:
Code; c01c35c7 <filp_close+17/80> <=====
0: 8b 43 14 mov 0x14(%ebx),%eax <=====
Code; c01c35ca <filp_close+1a/80>
3: 85 c0 test %eax,%eax
Code; c01c35cc <filp_close+1c/80>
5: 74 52 je 59 <_EIP+0x59>
Code; c01c35ce <filp_close+1e/80>
7: 8b 43 10 mov 0x10(%ebx),%eax
Code; c01c35d1 <filp_close+21/80>
a: 31 ff xor %edi,%edi
Code; c01c35d3 <filp_close+23/80>
c: 85 c0 test %eax,%eax
Code; c01c35d5 <filp_close+25/80>
e: 74 07 je 17 <_EIP+0x17>
Code; c01c35d7 <filp_close+27/80>
10: 8b 50 24 mov 0x24(%eax),%edx
Code; c01c35da <filp_close+2a/80>
13: 85 00 test %eax,(%eax)


1 warning issued. Results may not be reliable.
------

In all cases, the oops is preceeded by the following line in the logs:

get_unused_fd: slot 120 not NULL!


The patches I used were:

xfs-2.4.23-split*
nf-hipac-0.8rev3
2.4.24-pre2-libata1
grsecurity-2.0-rc4-2.4.23


The full kernel config is attached.

If you need more detailed information, please let me know.

TIA,

marek
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
# CONFIG_SBUS is not set
CONFIG_UID16=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_HAS_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_F00F_WORKS_OK=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
# CONFIG_HIGHIO is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_SMP is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_UP_IOAPIC is not set
# CONFIG_X86_TSC_DISABLE is not set
CONFIG_X86_TSC=y

#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_ISA=y
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_APM is not set

#
# ACPI Support
#
# CONFIG_ACPI is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_CISS_MONITOR_THREAD is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BLK_STATS is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
CONFIG_MD_MULTIPATH=y
# CONFIG_BLK_DEV_LVM is not set

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
CONFIG_SYN_COOKIES=y

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_FTP=y
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_MAC=y
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
CONFIG_IP_NF_MATCH_MARK=y
# CONFIG_IP_NF_MATCH_MULTIPORT is not set
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_STEALTH is not set
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_UNCLEAN=y
CONFIG_IP_NF_MATCH_OWNER=y
# CONFIG_IP_NF_FILTER is not set
# CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_DSCP is not set
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_LOG=y
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_ARP_MANGLE is not set

#
# IP: NF-HIPAC Configuration
#
CONFIG_IP_NF_HIPAC=m
CONFIG_IP_NF_HIPAC_CTHELP=m

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set

#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set

#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
# CONFIG_PHONE_IXJ_PCMCIA is not set

#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_BLK_DEV_ADMA100 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_AMD74XX_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
# CONFIG_BLK_DEV_ATARAID_SII is not set

#
# SCSI support
#
CONFIG_SCSI=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=y
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256

#
# I2C support
#
# CONFIG_I2C is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set

#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set

#
# Input core support is needed for gameports
#

#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
# CONFIG_IPMI_KCS is not set
# CONFIG_IPMI_WATCHDOG is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_SCx200_GPIO is not set
# CONFIG_AMD_RNG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_AMD_PM768 is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set

#
# Direct Rendering Manager (XFree86 DRI support)
#
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_QFMT_V2 is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_TRACE is not set
# CONFIG_XFS_DEBUG is not set

#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
# CONFIG_SUNRPC is not set
# CONFIG_LOCKD is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set

#
# Frame-buffer support
#
# CONFIG_FB is not set

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
# CONFIG_USB is not set

#
# Support for USB gadgets
#
# CONFIG_USB_GADGET is not set

#
# Bluetooth support
#
# CONFIG_BLUEZ is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=0

#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_TEST is not set

#
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_ZLIB_INFLATE is not set
# CONFIG_ZLIB_DEFLATE is not set

#
# Grsecurity
#
CONFIG_GRKERNSEC=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_GRKERNSEC_LOW is not set
# CONFIG_GRKERNSEC_MID is not set
# CONFIG_GRKERNSEC_HI is not set
CONFIG_GRKERNSEC_CUSTOM=y

#
# Address Space Protection
#
CONFIG_GRKERNSEC_PAX_NOEXEC=y
# CONFIG_GRKERNSEC_PAX_PAGEEXEC is not set
CONFIG_GRKERNSEC_PAX_SEGMEXEC=y
# CONFIG_GRKERNSEC_PAX_EMUTRAMP is not set
CONFIG_GRKERNSEC_PAX_MPROTECT=y
CONFIG_GRKERNSEC_PAX_NOELFRELOCS=y
CONFIG_GRKERNSEC_PAX_ASLR=y
# CONFIG_GRKERNSEC_PAX_RANDKSTACK is not set
CONFIG_GRKERNSEC_PAX_RANDUSTACK=y
CONFIG_GRKERNSEC_PAX_RANDMMAP=y
# CONFIG_GRKERNSEC_PAX_RANDEXEC is not set
CONFIG_GRKERNSEC_KMEM=y
CONFIG_GRKERNSEC_IO=y
CONFIG_RTC=y
# CONFIG_GRKERNSEC_PROC_MEMMAP is not set
# CONFIG_GRKERNSEC_HIDESYM is not set

#
# Role Based Access Control Options
#
CONFIG_GRKERNSEC_ACL_HIDEKERN=y
CONFIG_GRKERNSEC_ACL_MAXTRIES=3
CONFIG_GRKERNSEC_ACL_TIMEOUT=30

#
# Filesystem Protections
#
CONFIG_GRKERNSEC_PROC=y
# CONFIG_GRKERNSEC_PROC_USER is not set
CONFIG_GRKERNSEC_PROC_USERGROUP=y
CONFIG_GRKERNSEC_PROC_GID=4
CONFIG_GRKERNSEC_PROC_ADD=y
CONFIG_GRKERNSEC_LINK=y
CONFIG_GRKERNSEC_FIFO=y
CONFIG_GRKERNSEC_CHROOT=y
CONFIG_GRKERNSEC_CHROOT_MOUNT=y
CONFIG_GRKERNSEC_CHROOT_DOUBLE=y
CONFIG_GRKERNSEC_CHROOT_PIVOT=y
CONFIG_GRKERNSEC_CHROOT_CHDIR=y
CONFIG_GRKERNSEC_CHROOT_CHMOD=y
CONFIG_GRKERNSEC_CHROOT_FCHDIR=y
CONFIG_GRKERNSEC_CHROOT_MKNOD=y
CONFIG_GRKERNSEC_CHROOT_SHMAT=y
CONFIG_GRKERNSEC_CHROOT_UNIX=y
CONFIG_GRKERNSEC_CHROOT_FINDTASK=y
CONFIG_GRKERNSEC_CHROOT_NICE=y
CONFIG_GRKERNSEC_CHROOT_SYSCTL=y
CONFIG_GRKERNSEC_CHROOT_CAPS=y

#
# Kernel Auditing
#
CONFIG_GRKERNSEC_AUDIT_GROUP=y
CONFIG_GRKERNSEC_AUDIT_GID=100
# CONFIG_GRKERNSEC_EXECLOG is not set
CONFIG_GRKERNSEC_RESLOG=y
# CONFIG_GRKERNSEC_CHROOT_EXECLOG is not set
# CONFIG_GRKERNSEC_AUDIT_CHDIR is not set
CONFIG_GRKERNSEC_AUDIT_MOUNT=y
CONFIG_GRKERNSEC_AUDIT_IPC=y
# CONFIG_GRKERNSEC_SIGNAL is not set
CONFIG_GRKERNSEC_FORKFAIL=y
CONFIG_GRKERNSEC_TIME=y
CONFIG_GRKERNSEC_PROC_IPADDR=y

#
# Executable Protections
#
CONFIG_GRKERNSEC_EXECVE=y
CONFIG_GRKERNSEC_DMESG=y
CONFIG_GRKERNSEC_RANDPID=y
# CONFIG_GRKERNSEC_TPE is not set

#
# Network Protections
#
CONFIG_GRKERNSEC_RANDNET=y
CONFIG_GRKERNSEC_RANDISN=y
CONFIG_GRKERNSEC_RANDID=y
CONFIG_GRKERNSEC_RANDSRC=y
# CONFIG_GRKERNSEC_RANDRPC is not set
CONFIG_GRKERNSEC_SOCKET=y
# CONFIG_GRKERNSEC_SOCKET_ALL is not set
# CONFIG_GRKERNSEC_SOCKET_CLIENT is not set
CONFIG_GRKERNSEC_SOCKET_SERVER=y
CONFIG_GRKERNSEC_SOCKET_SERVER_GID=100

#
# Sysctl support
#
CONFIG_GRKERNSEC_SYSCTL=y

#
# Logging options
#
CONFIG_GRKERNSEC_FLOODTIME=10
CONFIG_GRKERNSEC_FLOODBURST=4

Attachment: signature.asc
Description: Digital signature