[PATCH 2.6 IrDA] 11/11: Kconfig/Makefile changes for #5-10

From: Jean Tourrilhes
Date: Fri Jan 23 2004 - 21:36:23 EST

Next message: Jean Tourrilhes: "[PATCH 2.6 IrDA] 7/11: girbil-sir: converted to new API"
Previous message: Jean Tourrilhes: "[PATCH 2.6 IrDA] 10/11: old_belkin-sir: converted to new API"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

ir262_dongles-11_makefile-2.diff :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<apply after all other patches>
<Patch from Martin Diehl>
* include build information for new dongle drivers (5->10)

diff -u -p linux/drivers/net/irda.d6/Kconfig linux/drivers/net/irda/Kconfig
--- linux/drivers/net/irda.d6/Kconfig Wed Dec 17 18:59:16 2003
+++ linux/drivers/net/irda/Kconfig Thu Jan 22 16:43:56 2004
@@ -65,6 +65,75 @@ config TEKRAM_DONGLE
dongles you will have to start irattach like this:
"irattach -d tekram".

+config LITELINK_DONGLE
+ tristate "Parallax LiteLink dongle"
+ depends on DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Parallax Litelink
+ dongle. To compile it as a module, choose M here. The Parallax
+ dongle attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for Parallax
+ dongles you will have to start irattach like this:
+ "irattach -d litelink".
+
+config MA600_DONGLE
+ tristate "Mobile Action MA600 dongle"
+ depends on DONGLE && IRDA && EXPERIMENTAL
+ help
+ Say Y here if you want to build support for the Mobile Action MA600
+ dongle. To compile it as a module, choose M here. The MA600 dongle
+ attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. The driver should also support
+ the MA620 USB version of the dongle, if the integrated USB-to-RS232
+ converter is supported by usbserial. To activate support for
+ MA600 dongle you will have to start irattach like this:
+ "irattach -d ma600".
+
+config GIRBIL_DONGLE
+ tristate "Greenwich GIrBIL dongle"
+ depends on DONGLE && IRDA && EXPERIMENTAL
+ help
+ Say Y here if you want to build support for the Greenwich GIrBIL
+ dongle. If you want to compile it as a module, choose M here.
+ The Greenwich dongle attaches to the normal 9-pin serial port
+ connector, and can currently only be used by IrTTY. To activate
+ support for Greenwich dongles you will have to start irattach
+ like this: "irattach -d girbil".
+
+config MCP2120_DONGLE
+ tristate "Microchip MCP2120"
+ depends on DONGLE && IRDA && EXPERIMENTAL
+ help
+ Say Y here if you want to build support for the Microchip MCP2120
+ dongle. If you want to compile it as a module, choose M here.
+ The MCP2120 dongle attaches to the normal 9-pin serial port
+ connector, and can currently only be used by IrTTY. To activate
+ support for MCP2120 dongles you will have to start irattach
+ like this: "irattach -d mcp2120".
+
+ You must build this dongle yourself. For more information see:
+ <http://www.eyetap.org/~tangf/irda_sir_linux.html>
+
+config OLD_BELKIN_DONGLE
+ tristate "Old Belkin dongle"
+ depends on DONGLE && IRDA && EXPERIMENTAL
+ help
+ Say Y here if you want to build support for the Adaptec Airport 1000
+ and 2000 dongles. If you want to compile it as a module, choose
+ M here. Some information is contained in the comments
+ at the top of <file:drivers/net/irda/old_belkin.c>.
+
+config ACT200L_DONGLE
+ tristate "ACTiSYS IR-200L dongle"
+ depends on DONGLE && IRDA && EXPERIMENTAL
+ help
+ Say Y here if you want to build support for the ACTiSYS IR-200L
+ dongle. If you want to compile it as a module, choose M here.
+ The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
+ port connector, and can currently only be used by IrTTY.
+ To activate support for ACTiSYS IR-200L dongle you will have to
+ start irattach like this: "irattach -d act200l".
+
comment "Old SIR device drivers"

config IRPORT_SIR
@@ -130,7 +199,7 @@ config TEKRAM_DONGLE_OLD
dongles you will have to start irattach like this:
"irattach -d tekram".

-config GIRBIL_DONGLE
+config GIRBIL_DONGLE_OLD
tristate "Greenwich GIrBIL dongle"
depends on DONGLE_OLD && IRDA
help
@@ -141,7 +210,7 @@ config GIRBIL_DONGLE
dongles you will have to insert "irattach -d girbil" in the
/etc/irda/drivers script.

-config LITELINK_DONGLE
+config LITELINK_DONGLE_OLD
tristate "Parallax LiteLink dongle"
depends on DONGLE_OLD && IRDA
help
@@ -152,7 +221,7 @@ config LITELINK_DONGLE
dongles you will have to start irattach like this:
"irattach -d litelink".

-config MCP2120_DONGLE
+config MCP2120_DONGLE_OLD
tristate "Microchip MCP2120"
depends on DONGLE_OLD && IRDA
help
@@ -166,7 +235,7 @@ config MCP2120_DONGLE
You must build this dongle yourself. For more information see:
<http://www.eyetap.org/~tangf/irda_sir_linux.html>

-config OLD_BELKIN_DONGLE
+config OLD_BELKIN_DONGLE_OLD
tristate "Old Belkin dongle"
depends on DONGLE_OLD && IRDA
help
@@ -175,11 +244,7 @@ config OLD_BELKIN_DONGLE
will be called old_belkin. Some information is contained in the
comments at the top of <file:drivers/net/irda/old_belkin.c>.

-config EP7211_IR
- tristate "EP7211 I/R support"
- depends on DONGLE_OLD && ARCH_EP7211 && IRDA
-
-config ACT200L_DONGLE
+config ACT200L_DONGLE_OLD
tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)"
depends on DONGLE_OLD && EXPERIMENTAL && IRDA
help
@@ -190,7 +255,7 @@ config ACT200L_DONGLE
ACTiSYS IR-200L dongles you will have to start irattach like this:
"irattach -d act200l".

-config MA600_DONGLE
+config MA600_DONGLE_OLD
tristate "Mobile Action MA600 dongle (EXPERIMENTAL)"
depends on DONGLE_OLD && EXPERIMENTAL && IRDA
---help---
@@ -205,6 +270,10 @@ config MA600_DONGLE

There is a pre-compiled module on
<http://engsvr.ust.hk/~eetwl95/download/ma600-2.4.x.tar.gz>
+
+config EP7211_IR
+ tristate "EP7211 I/R support"
+ depends on DONGLE_OLD && ARCH_EP7211 && IRDA

comment "FIR device drivers"

diff -u -p linux/drivers/net/irda.d6/Makefile linux/drivers/net/irda/Makefile
--- linux/drivers/net/irda.d6/Makefile Wed Dec 17 18:58:48 2003
+++ linux/drivers/net/irda/Makefile Thu Jan 22 16:43:56 2004
@@ -21,20 +21,26 @@ obj-$(CONFIG_VIA_FIR) += via-ircc.o
obj-$(CONFIG_ESI_DONGLE_OLD) += esi.o
obj-$(CONFIG_TEKRAM_DONGLE_OLD) += tekram.o
obj-$(CONFIG_ACTISYS_DONGLE_OLD) += actisys.o
-obj-$(CONFIG_GIRBIL_DONGLE) += girbil.o
-obj-$(CONFIG_LITELINK_DONGLE) += litelink.o
-obj-$(CONFIG_OLD_BELKIN_DONGLE) += old_belkin.o
+obj-$(CONFIG_GIRBIL_DONGLE_OLD) += girbil.o
+obj-$(CONFIG_LITELINK_DONGLE_OLD) += litelink.o
+obj-$(CONFIG_OLD_BELKIN_DONGLE_OLD) += old_belkin.o
+obj-$(CONFIG_MCP2120_DONGLE_OLD) += mcp2120.o
+obj-$(CONFIG_ACT200L_DONGLE_OLD) += act200l.o
+obj-$(CONFIG_MA600_DONGLE_OLD) += ma600.o
obj-$(CONFIG_EP7211_IR) += ep7211_ir.o
-obj-$(CONFIG_MCP2120_DONGLE) += mcp2120.o
obj-$(CONFIG_AU1000_FIR) += au1k_ir.o
-obj-$(CONFIG_ACT200L_DONGLE) += act200l.o
-obj-$(CONFIG_MA600_DONGLE) += ma600.o
# New SIR drivers
obj-$(CONFIG_IRTTY_SIR) += irtty-sir.o sir-dev.o
# New dongles drivers for new SIR drivers
obj-$(CONFIG_ESI_DONGLE) += esi-sir.o
obj-$(CONFIG_TEKRAM_DONGLE) += tekram-sir.o
obj-$(CONFIG_ACTISYS_DONGLE) += actisys-sir.o
+obj-$(CONFIG_LITELINK_DONGLE) += litelink-sir.o
+obj-$(CONFIG_GIRBIL_DONGLE) += girbil-sir.o
+obj-$(CONFIG_OLD_BELKIN_DONGLE) += old_belkin-sir.o
+obj-$(CONFIG_MCP2120_DONGLE) += mcp2120-sir.o
+obj-$(CONFIG_ACT200L_DONGLE) += act200l-sir.o
+obj-$(CONFIG_MA600_DONGLE) += ma600-sir.o

# The SIR helper module
sir-dev-objs := sir_core.o sir_dev.o sir_dongle.o sir_kthread.o
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Jean Tourrilhes: "[PATCH 2.6 IrDA] 7/11: girbil-sir: converted to new API"
Previous message: Jean Tourrilhes: "[PATCH 2.6 IrDA] 10/11: old_belkin-sir: converted to new API"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]