Re: [ACPI] acpi problem with nforce motherboards and ethernet

[Craig Bradney]

On Fri, 2004-02-06 at 10:26, Prakash K. Cheemplavam wrote:
> Craig Bradney wrote:
> > On Fri, 2004-02-06 at 01:58, Prakash K. Cheemplavam wrote:
> > 
> >>>There is a way to "activate" cpu Disconnect? or it gets enabled by 
> >>>simply applying it?
> >>
> >>In newer Abit BIOSes there is an option, or you use athcool.
> >>
> >>
> >>
> >>>Yes, I have a Abit motherboards, perhaps it's the problem with the bios.
> >>
> >>I have an Abit NF7-S Rev2 with latest Bios.
> > 
> > 
> > As noted in my last post.. you dont NEED athcool OR Disconnect to get
> > stability.. 
> > 
> > I've only ever run athcool to check the status.. and my BIOS doesnt have
> > disconnect.
> > 
> > A7N8X Deluxe V2 BIOS 1007.. 11 days uptime here.. haven had a crash
> > since Ross released those patches ages ago.
> 
> WITHOUT Disconnect my System is stable, but hotter when idle, so that is 
> not the point. Ross wanted the patched to work with APIC and Disconnect.
> 
> DO you guys use APIC (not ACPI)? I use both APIC (and local APIC) and 
> ACPI. ACPI is not the problem (unless they break something...) but APIC 
> and CPU Disconnect makes trouble on nforce2.

athcool reports:
nVIDIA nForce2 (10de 01e0) found
'Halt Disconnect and Stop Grant Disconnect' bit is enabled.

I have never used athcool to turn it off, and I don't have a BIOS
option. APIC, local APIC and ACPI are all on.

Craig

Attachment: signature.asc
Description: This is a digitally signed message part