Re: Linux-2.6.3 : [eth0: Too much work at interrupt,status=0x00000001.]

[YOSHIFUJI Hideaki / 吉藤英明]

In article <200402201803.12146.andrew@xxxxxxxxxxx> (at Fri, 20 Feb 2004 18:03:11 +0000), Andrew Walrond <andrew@xxxxxxxxxxx> says:

> I'm getting loads of these messages in dmesg.
> 
> This is a vanilla 2.6.3 kernel with ACPI disabled with acpi=off boot 
> parameter. No preempt, APIC and IOAPIC enabled
> 
> Its a single 2Ghz celeron with Via chipset and Rhine II ethernet. It is under 
> no load at all. ssh only.
> 
> dmesg is short and follows; Any knowledge apprieciated!
:
> eth0: Too much work at interrupt, status=0x00000001.

I've got this several times, randomly, and
I had to go to the console to reboot the machine.

Well, sorry, I haven't tracked it down yet...

Others?

-- 
Hideaki YOSHIFUJI @ USAGI Project <yoshfuji@xxxxxxxxxxxxxx>
GPG FP: 9022 65EB 1ECF 3AD1 0BDF  80D8 4807 F894 E062 0EEA
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/