Re: Network error with Intel E1000 Adapter on update 2.4.25 ==> 2.6.3

[Marc-Christian Petersen]

On Friday 27 February 2004 13:22, Martin Bene wrote:

Hi Martin,

> When trying to update the kernel from 2.4.25 to 2.6.3 I run into a probelm:
> While the driver for the onboard Intel E1000 network adapter loads OK, it
> doesn't seem to find an interrupt for the interface - ifconfig shows:
> eth0      Link encap:Ethernet  HWaddr 00:0E:A6:2D:7A:64
>           BROADCAST MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
>           Base address:0x9000 Memory:fc000000-fc020000
> [ ... ripped the rest ... ]
> Board is an Asus PC-DL, Intel 875P Chipset, one Xeon 2.8Ghz CPU, Onboard
> e1000 Network interface. Any idea how I can get the onboard NIC to work?

full output of /var/log/dmesg || dmesg after bootup might help.

ciao, Marc

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/