Re: [linux-usb-devel] Re: serious 2.6 bug in USB subsystem?

[Matthias Andree]

On Sat, 06 Mar 2004, David Brownell wrote:

> That's really the only place the HCD does anything
> that could corrupt the ED queues, which is what looks
> to be happening.

I have a situation that may or may not be related, but it makes 2.6 USB
unusable, so I'll just report it.

I have USB lockups with various 2.6.3 variants, including 2.6.4-rc2, on
a VIA KT600 (Via 8237 south bridge). Linux 2.4.25 and newer (BitKeeper version)
behave well, so does FreeBSD 5-CURRENT on the same computer (dual boot), and
apparently the 2.6.3 kernels are fine on a VIA KT133 (Via 82C686 south bridge -
older variant with UDMA66 only).

During a scan attempt with an Epson 1650 (USB 1.1, hence UHCI) I caught these
logs in dmesg, the USB subsystem is dead now (2.6.4-rc2). I don't have
USB 2.0 hardware so I cannot check if EHCI would be fine.

usb 3-2: usb_disable_device nuking non-ep0 URBs
usb 3-2: unregistering interface 3-2:1.0
drivers/usb/core/usb.c: usb_hotplug
usb 3-2: registering 3-2:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
usb 3-2: usb_disable_device nuking non-ep0 URBs
usb 3-2: unregistering interface 3-2:1.0
drivers/usb/core/usb.c: usb_hotplug
usb 3-2: registering 3-2:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
uhci_hcd 0000:00:10.1: uhci_result_control: failed with status 440000
[ccdc8270] link (0cdc81e2) element (0ced4140)
  0: [cced4140] link (0ced4180) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=0c446380)
  1: [cced4180] link (0ced41c0) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=06997000)
  2: [cced41c0] link (0ced4200) e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=2, PID=69(IN) (buf=06997008)
  3: [cced4200] link (0ced4240) e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=06997010)
  4: [cced4240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)

usbfs: USBDEVFS_CONTROL failed cmd usbmodules dev 2 rqt 128 rq 6 len 18 ret -110
uhci_hcd 0000:00:10.1: uhci_result_control: failed with status 500000
[ccdc82a0] link (0cdc81e2) element (0ced4300)
 Element != First TD
  0: [cced4280] link (0ced42c0) e3 Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=0c446b00)
  1: [cced42c0] link (0ced4300) e3 Length=7 MaxLen=7 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=03235000)
  2: [cced4300] link (0ced4340) e3 Stalled Babble Length=0 MaxLen=0 DT0 EndPt=0 Dev=2, PID=69(IN) (buf=03235008)
  3: [cced4340] link (0cdc82d2) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
--Queued QH's:
[ccdc82d0] link (0cdc81e2) element (0ced4380)
  0: [cced4380] link (0ced43c0) e3 Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=0c446380)
  1: [cced43c0] link (0ced4400) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=06997000)
  2: [cced4400] link (0ced4440) e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=2, PID=69(IN) (buf=06997008)
  3: [cced4440] link (0ced4480) e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=06997010)
  4: [cced4480] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)

usbfs: USBDEVFS_CONTROL failed cmd usbmodules dev 2 rqt 128 rq 6 len 9 ret -75
usb 3-2: control timeout on ep0in
usb 3-2: control timeout on ep0in
usb 3-2: control timeout on ep0in
usb 3-2: bulk timeout on ep1out


-- 
Matthias Andree

Encrypt your mail: my GnuPG key ID is 0x052E7D95
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/