Re: [PATCH] i2c driver fixes for 2.6.4

From: Greg KH
Date: Mon Mar 15 2004 - 22:13:49 EST

ChangeSet 1.1557.61.17, 2004/02/23 16:43:25-08:00, khali@xxxxxxxxxxxx

[PATCH] I2C: rename sysfs files, part 2 of 2

Here is the second step of my sysfs renaming plan.

This one does the following renames (as I already announced on the
LKML):
temp<n>_hyst -> temp<n>_max_hyst or temp<n>_crit_hyst
sensor<n> -> temp<n>_type
pwm<n> -> fan<n>_pwm
pwm<n>_enable -> fan<n>_pwm_enable
vid -> in<n>_ref

The associated libsensors patch is here:
http://jdelvare.net1.nerim.net/sensors/libsensors-sysfs-names-2.diff
(not applied yet, on purpose)


Note that the w83781d part is a bit more complex, not only because it is
the only driver to require the 5 changes, but also because at some point
the macros assume that the internal variable names match the sysfs
names, so I had to change them too (better than rewriting the macros,
methinks).

For reference, here is the list of changes, by driver:

asb100:
hyst -> max_hyst (4)
pwm -> fan_pwm (1)
pwm_enable -> fan_pwm_enable (1)
vid -> in_ref (1)
fscher:
pwm -> fan_pwm (3)
gl518sm:
hyst -> max_hyst (1)
it87:
sensor -> temp_type (3)
lm75:
hyst -> max_hyst (1)
lm78:
hyst -> max_hyst (1)
vid -> in_ref (1)
lm85:
pwm -> fan_pwm (3)
pwm_enable -> fan_pwm_enable (3)
vid -> in_ref (1)
lm90:
hyst -> crit_hyst (2)
via686a:
hyst -> max_hyst (3)
w83781d:
hyst -> max_hyst (2)
sensor -> temp_type (3)
pwm -> fan_pwm (4)
pwm_enable -> fan_pwm_enable (1)
vid -> in_ref (1)

There's also a documentation update. There will be one more after that
(to make it more readable, no contents change), and a patch to lm83.c to
bring it to compliance with the (new) standard. (If you wonder why I did
not change it with the other drivers: because it was *already* not in
compliance with the old standard. There's some real work to do for this
one.)


Documentation/i2c/sysfs-interface | 26 +++++++++++++++++---------
drivers/i2c/chips/asb100.c | 16 ++++++++--------
drivers/i2c/chips/fscher.c | 8 ++++----
drivers/i2c/chips/gl518sm.c | 4 ++--
drivers/i2c/chips/it87.c | 8 ++++----
drivers/i2c/chips/lm75.c | 4 ++--
drivers/i2c/chips/lm78.c | 8 ++++----
drivers/i2c/chips/lm85.c | 20 ++++++++++----------
drivers/i2c/chips/lm90.c | 8 ++++----
drivers/i2c/chips/via686a.c | 8 ++++----
drivers/i2c/chips/w83781d.c | 34 +++++++++++++++++-----------------
11 files changed, 76 insertions(+), 68 deletions(-)


diff -Nru a/Documentation/i2c/sysfs-interface b/Documentation/i2c/sysfs-interface
--- a/Documentation/i2c/sysfs-interface Mon Mar 15 14:36:15 2004
+++ b/Documentation/i2c/sysfs-interface Mon Mar 15 14:36:15 2004
@@ -107,7 +107,7 @@
in7_* varies
in8_* varies

-vid CPU core voltage.
+in0_ref CPU core reference voltage.
Read only.
Fixed point value in form XXXX corresponding to CPU core
voltage as told to the sensor chip. Divide by 1000 to
@@ -138,14 +138,15 @@
Some chips only support values 1,2,4,8.
See doc/fan-divisors for details.

-pwm[1-3] Pulse width modulation fan control.
+fan[1-3]_pwm Pulse width modulation fan control.
Integer 0 - 255
Read/Write
255 is max or 100%.
Corresponds to the fans 1-3.

-pwm[1-3]_enable pwm enable
- not always present even if pwm* is.
+fan[1-3]_pwm_enable
+ Switch PWM on and off.
+ Not always present even if fan*_pwm is.
0 to turn off
1 to turn on
Read/Write
@@ -155,7 +156,7 @@
* Temperatures *
****************

-sensor[1-3] Sensor type selection.
+temp[1-3]_type Sensor type selection.
Integers 1,2,3, or thermistor Beta value (3435)
Read/Write.

@@ -169,7 +170,8 @@
1000 to get degrees Celsius.
Read/Write value.

-temp[1-3]_hyst Temperature hysteresis value.
+temp[1-3]_max_hyst
+ Temperature hysteresis value for max limit.
Fixed point value in form XXXXX and should be divided by
1000 to get degrees Celsius. Must be reported as an
absolute temperature, NOT a delta from the max value.
@@ -180,11 +182,17 @@
1000 to get degrees Celsius.
Read only value.

-temp_crit Temperature critical value, typically greater than all
- temp_max values.
+temp[1-4]_crit Temperature critical value, typically greater than
+ corresponding temp_max values.
Fixed point value in form XXXXX and should be divided by
1000 to get degrees Celsius.
- Common to all temperature channels.
+ Read/Write value.
+
+temp[1-2]_crit_hyst
+ Temperature hysteresis value for critical limit.
+ Fixed point value in form XXXXX and should be divided by
+ 1000 to get degrees Celsius. Must be reported as an
+ absolute temperature, NOT a delta from the critical value.
Read/Write value.

If there are multiple temperature sensors, temp1_* is
diff -Nru a/drivers/i2c/chips/asb100.c b/drivers/i2c/chips/asb100.c
--- a/drivers/i2c/chips/asb100.c Mon Mar 15 14:36:15 2004
+++ b/drivers/i2c/chips/asb100.c Mon Mar 15 14:36:15 2004
@@ -505,7 +505,7 @@
{ \
return set_temp_hyst(dev, buf, count, num-1); \
} \
-static DEVICE_ATTR(temp##num##_hyst, S_IRUGO | S_IWUSR, \
+static DEVICE_ATTR(temp##num##_max_hyst, S_IRUGO | S_IWUSR, \
show_temp_hyst##num, set_temp_hyst##num)

sysfs_temp(1)
@@ -517,7 +517,7 @@
#define device_create_file_temp(client, num) do { \
device_create_file(&client->dev, &dev_attr_temp##num##_input); \
device_create_file(&client->dev, &dev_attr_temp##num##_max); \
- device_create_file(&client->dev, &dev_attr_temp##num##_hyst); \
+ device_create_file(&client->dev, &dev_attr_temp##num##_max_hyst); \
} while (0)

static ssize_t show_vid(struct device *dev, char *buf)
@@ -526,9 +526,9 @@
return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
}

-static DEVICE_ATTR(vid, S_IRUGO, show_vid, NULL)
+static DEVICE_ATTR(in0_ref, S_IRUGO, show_vid, NULL)
#define device_create_file_vid(client) \
-device_create_file(&client->dev, &dev_attr_vid)
+device_create_file(&client->dev, &dev_attr_in0_ref)

/* VRM */
static ssize_t show_vrm(struct device *dev, char *buf)
@@ -597,12 +597,12 @@
return count;
}

-static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm1, set_pwm1)
-static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR(fan1_pwm, S_IRUGO | S_IWUSR, show_pwm1, set_pwm1)
+static DEVICE_ATTR(fan1_pwm_enable, S_IRUGO | S_IWUSR,
show_pwm_enable1, set_pwm_enable1)
#define device_create_file_pwm1(client) do { \
- device_create_file(&new_client->dev, &dev_attr_pwm1); \
- device_create_file(&new_client->dev, &dev_attr_pwm1_enable); \
+ device_create_file(&new_client->dev, &dev_attr_fan1_pwm); \
+ device_create_file(&new_client->dev, &dev_attr_fan1_pwm_enable); \
} while (0)

/* This function is called when:
diff -Nru a/drivers/i2c/chips/fscher.c b/drivers/i2c/chips/fscher.c
--- a/drivers/i2c/chips/fscher.c Mon Mar 15 14:36:15 2004
+++ b/drivers/i2c/chips/fscher.c Mon Mar 15 14:36:15 2004
@@ -205,7 +205,7 @@
static DEVICE_ATTR(kind, S_IRUGO, show_##kind##0##sub, NULL);

#define sysfs_fan(offset, reg_status, reg_min, reg_ripple, reg_act) \
-sysfs_rw_n(pwm, , offset, reg_min) \
+sysfs_rw_n(fan, _pwm , offset, reg_min) \
sysfs_rw_n(fan, _status, offset, reg_status) \
sysfs_rw_n(fan, _div , offset, reg_ripple) \
sysfs_ro_n(fan, _input , offset, reg_act)
@@ -254,7 +254,7 @@
#define device_create_file_fan(client, offset) \
do { \
device_create_file(&client->dev, &dev_attr_fan##offset##_status); \
- device_create_file(&client->dev, &dev_attr_pwm##offset); \
+ device_create_file(&client->dev, &dev_attr_fan##offset##_pwm); \
device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
} while (0)
@@ -489,7 +489,7 @@
return sprintf(buf, "%u\n", data->fan_status[FAN_INDEX_FROM_NUM(nr)] & 0x04);
}

-static ssize_t set_pwm(struct i2c_client *client, struct fscher_data *data,
+static ssize_t set_fan_pwm(struct i2c_client *client, struct fscher_data *data,
const char *buf, size_t count, int nr, int reg)
{
data->fan_min[FAN_INDEX_FROM_NUM(nr)] = simple_strtoul(buf, NULL, 10) & 0xff;
@@ -498,7 +498,7 @@
return count;
}

-static ssize_t show_pwm (struct fscher_data *data, char *buf, int nr)
+static ssize_t show_fan_pwm (struct fscher_data *data, char *buf, int nr)
{
return sprintf(buf, "%u\n", data->fan_min[FAN_INDEX_FROM_NUM(nr)]);
}
diff -Nru a/drivers/i2c/chips/gl518sm.c b/drivers/i2c/chips/gl518sm.c
--- a/drivers/i2c/chips/gl518sm.c Mon Mar 15 14:36:15 2004
+++ b/drivers/i2c/chips/gl518sm.c Mon Mar 15 14:36:15 2004
@@ -309,7 +309,7 @@

static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
static DEVICE_ATTR(temp1_max, S_IWUSR|S_IRUGO, show_temp_max1, set_temp_max1);
-static DEVICE_ATTR(temp1_hyst, S_IWUSR|S_IRUGO,
+static DEVICE_ATTR(temp1_max_hyst, S_IWUSR|S_IRUGO,
show_temp_hyst1, set_temp_hyst1);
static DEVICE_ATTR(fan1_auto, S_IWUSR|S_IRUGO, show_fan_auto1, set_fan_auto1);
static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input1, NULL);
@@ -445,7 +445,7 @@
device_create_file(&new_client->dev, &dev_attr_fan2_div);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp1_max);
- device_create_file(&new_client->dev, &dev_attr_temp1_hyst);
+ device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
device_create_file(&new_client->dev, &dev_attr_alarms);
device_create_file(&new_client->dev, &dev_attr_beep_enable);
device_create_file(&new_client->dev, &dev_attr_beep_mask);
diff -Nru a/drivers/i2c/chips/it87.c b/drivers/i2c/chips/it87.c
--- a/drivers/i2c/chips/it87.c Mon Mar 15 14:36:15 2004
+++ b/drivers/i2c/chips/it87.c Mon Mar 15 14:36:15 2004
@@ -450,7 +450,7 @@
{ \
return set_sensor(dev, buf, count, 0x##offset - 1); \
} \
-static DEVICE_ATTR(sensor##offset, S_IRUGO | S_IWUSR, \
+static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \
show_sensor_##offset, set_sensor_##offset)

show_sensor_offset(1);
@@ -737,9 +737,9 @@
device_create_file(&new_client->dev, &dev_attr_temp1_min);
device_create_file(&new_client->dev, &dev_attr_temp2_min);
device_create_file(&new_client->dev, &dev_attr_temp3_min);
- device_create_file(&new_client->dev, &dev_attr_sensor1);
- device_create_file(&new_client->dev, &dev_attr_sensor2);
- device_create_file(&new_client->dev, &dev_attr_sensor3);
+ device_create_file(&new_client->dev, &dev_attr_temp1_type);
+ device_create_file(&new_client->dev, &dev_attr_temp2_type);
+ device_create_file(&new_client->dev, &dev_attr_temp3_type);
device_create_file(&new_client->dev, &dev_attr_fan1_input);
device_create_file(&new_client->dev, &dev_attr_fan2_input);
device_create_file(&new_client->dev, &dev_attr_fan3_input);
diff -Nru a/drivers/i2c/chips/lm75.c b/drivers/i2c/chips/lm75.c
--- a/drivers/i2c/chips/lm75.c Mon Mar 15 14:36:15 2004
+++ b/drivers/i2c/chips/lm75.c Mon Mar 15 14:36:15 2004
@@ -105,7 +105,7 @@
set(temp_hyst, LM75_REG_TEMP_HYST);

static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
-static DEVICE_ATTR(temp1_hyst, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
+static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL);

static int lm75_attach_adapter(struct i2c_adapter *adapter)
@@ -198,7 +198,7 @@

/* Register sysfs hooks */
device_create_file(&new_client->dev, &dev_attr_temp1_max);
- device_create_file(&new_client->dev, &dev_attr_temp1_hyst);
+ device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
device_create_file(&new_client->dev, &dev_attr_temp1_input);

return 0;
diff -Nru a/drivers/i2c/chips/lm78.c b/drivers/i2c/chips/lm78.c
--- a/drivers/i2c/chips/lm78.c Mon Mar 15 14:36:15 2004
+++ b/drivers/i2c/chips/lm78.c Mon Mar 15 14:36:15 2004
@@ -372,7 +372,7 @@
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL)
static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
show_temp_over, set_temp_over)
-static DEVICE_ATTR(temp1_hyst, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
show_temp_hyst, set_temp_hyst)

/* 3 Fans */
@@ -495,7 +495,7 @@
lm78_update_client(client);
return sprintf(buf, "%d\n", VID_FROM_REG(data->vid));
}
-static DEVICE_ATTR(vid, S_IRUGO, show_vid, NULL);
+static DEVICE_ATTR(in0_ref, S_IRUGO, show_vid, NULL);

/* Alarms */
static ssize_t show_alarms(struct device *dev, char *buf)
@@ -680,7 +680,7 @@
device_create_file(&new_client->dev, &dev_attr_in6_max);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp1_max);
- device_create_file(&new_client->dev, &dev_attr_temp1_hyst);
+ device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
device_create_file(&new_client->dev, &dev_attr_fan1_input);
device_create_file(&new_client->dev, &dev_attr_fan1_min);
device_create_file(&new_client->dev, &dev_attr_fan1_div);
@@ -691,7 +691,7 @@
device_create_file(&new_client->dev, &dev_attr_fan3_min);
device_create_file(&new_client->dev, &dev_attr_fan3_div);
device_create_file(&new_client->dev, &dev_attr_alarms);
- device_create_file(&new_client->dev, &dev_attr_vid);
+ device_create_file(&new_client->dev, &dev_attr_in0_ref);

return 0;

diff -Nru a/drivers/i2c/chips/lm85.c b/drivers/i2c/chips/lm85.c
--- a/drivers/i2c/chips/lm85.c Mon Mar 15 14:36:15 2004
+++ b/drivers/i2c/chips/lm85.c Mon Mar 15 14:36:15 2004
@@ -480,7 +480,7 @@
return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
}

-static DEVICE_ATTR(vid, S_IRUGO, show_vid_reg, NULL)
+static DEVICE_ATTR(in0_ref, S_IRUGO, show_vid_reg, NULL)

static ssize_t show_vrm_reg(struct device *dev, char *buf)
{
@@ -564,9 +564,9 @@
{ \
return show_pwm_enable(dev, buf, 0x##offset - 1); \
} \
-static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
+static DEVICE_ATTR(fan##offset##_pwm, S_IRUGO | S_IWUSR, \
show_pwm_##offset, set_pwm_##offset) \
-static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO, show_pwm_enable##offset, NULL)
+static DEVICE_ATTR(fan##offset##_pwm_enable, S_IRUGO, show_pwm_enable##offset, NULL)

show_pwm_reg(1);
show_pwm_reg(2);
@@ -894,12 +894,12 @@
device_create_file(&new_client->dev, &dev_attr_fan2_min);
device_create_file(&new_client->dev, &dev_attr_fan3_min);
device_create_file(&new_client->dev, &dev_attr_fan4_min);
- device_create_file(&new_client->dev, &dev_attr_pwm1);
- device_create_file(&new_client->dev, &dev_attr_pwm2);
- device_create_file(&new_client->dev, &dev_attr_pwm3);
- device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
- device_create_file(&new_client->dev, &dev_attr_pwm2_enable);
- device_create_file(&new_client->dev, &dev_attr_pwm3_enable);
+ device_create_file(&new_client->dev, &dev_attr_fan1_pwm);
+ device_create_file(&new_client->dev, &dev_attr_fan2_pwm);
+ device_create_file(&new_client->dev, &dev_attr_fan3_pwm);
+ device_create_file(&new_client->dev, &dev_attr_fan1_pwm_enable);
+ device_create_file(&new_client->dev, &dev_attr_fan2_pwm_enable);
+ device_create_file(&new_client->dev, &dev_attr_fan3_pwm_enable);
device_create_file(&new_client->dev, &dev_attr_in0_input);
device_create_file(&new_client->dev, &dev_attr_in1_input);
device_create_file(&new_client->dev, &dev_attr_in2_input);
@@ -925,7 +925,7 @@
device_create_file(&new_client->dev, &dev_attr_temp2_max);
device_create_file(&new_client->dev, &dev_attr_temp3_max);
device_create_file(&new_client->dev, &dev_attr_vrm);
- device_create_file(&new_client->dev, &dev_attr_vid);
+ device_create_file(&new_client->dev, &dev_attr_in0_ref);
device_create_file(&new_client->dev, &dev_attr_alarms);

return 0;
diff -Nru a/drivers/i2c/chips/lm90.c b/drivers/i2c/chips/lm90.c
--- a/drivers/i2c/chips/lm90.c Mon Mar 15 14:36:15 2004
+++ b/drivers/i2c/chips/lm90.c Mon Mar 15 14:36:15 2004
@@ -259,9 +259,9 @@
set_temp_crit1);
static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2,
set_temp_crit2);
-static DEVICE_ATTR(temp1_hyst, S_IWUSR | S_IRUGO, show_temp_hyst1,
+static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst1,
set_temp_hyst1);
-static DEVICE_ATTR(temp2_hyst, S_IRUGO, show_temp_hyst2, NULL);
+static DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_hyst2, NULL);
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);

/*
@@ -389,8 +389,8 @@
device_create_file(&new_client->dev, &dev_attr_temp2_max);
device_create_file(&new_client->dev, &dev_attr_temp1_crit);
device_create_file(&new_client->dev, &dev_attr_temp2_crit);
- device_create_file(&new_client->dev, &dev_attr_temp1_hyst);
- device_create_file(&new_client->dev, &dev_attr_temp2_hyst);
+ device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst);
+ device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst);
device_create_file(&new_client->dev, &dev_attr_alarms);

return 0;
diff -Nru a/drivers/i2c/chips/via686a.c b/drivers/i2c/chips/via686a.c
--- a/drivers/i2c/chips/via686a.c Mon Mar 15 14:36:15 2004
+++ b/drivers/i2c/chips/via686a.c Mon Mar 15 14:36:15 2004
@@ -559,7 +559,7 @@
static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, NULL) \
static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
show_temp_##offset##_over, set_temp_##offset##_over) \
-static DEVICE_ATTR(temp##offset##_hyst, S_IRUGO | S_IWUSR, \
+static DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
show_temp_##offset##_hyst, set_temp_##offset##_hyst)

show_temp_offset(1);
@@ -763,9 +763,9 @@
device_create_file(&new_client->dev, &dev_attr_temp1_max);
device_create_file(&new_client->dev, &dev_attr_temp2_max);
device_create_file(&new_client->dev, &dev_attr_temp3_max);
- device_create_file(&new_client->dev, &dev_attr_temp1_hyst);
- device_create_file(&new_client->dev, &dev_attr_temp2_hyst);
- device_create_file(&new_client->dev, &dev_attr_temp3_hyst);
+ device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+ device_create_file(&new_client->dev, &dev_attr_temp2_max_hyst);
+ device_create_file(&new_client->dev, &dev_attr_temp3_max_hyst);
device_create_file(&new_client->dev, &dev_attr_fan1_input);
device_create_file(&new_client->dev, &dev_attr_fan2_input);
device_create_file(&new_client->dev, &dev_attr_fan1_min);
diff -Nru a/drivers/i2c/chips/w83781d.c b/drivers/i2c/chips/w83781d.c
--- a/drivers/i2c/chips/w83781d.c Mon Mar 15 14:36:15 2004
+++ b/drivers/i2c/chips/w83781d.c Mon Mar 15 14:36:15 2004
@@ -247,10 +247,10 @@
u8 fan_min[3]; /* Register value */
u8 temp;
u8 temp_max; /* Register value */
- u8 temp_hyst; /* Register value */
+ u8 temp_max_hyst; /* Register value */
u16 temp_add[2]; /* Register value */
u16 temp_max_add[2]; /* Register value */
- u16 temp_hyst_add[2]; /* Register value */
+ u16 temp_max_hyst_add[2]; /* Register value */
u8 fan_div[3]; /* Register encoding, shifted right */
u8 vid; /* Register encoding, combined */
u32 alarms; /* Register encoding, combined */
@@ -448,7 +448,7 @@
}
show_temp_reg(temp);
show_temp_reg(temp_max);
-show_temp_reg(temp_hyst);
+show_temp_reg(temp_max_hyst);

#define store_temp_reg(REG, reg) \
static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
@@ -476,7 +476,7 @@
return count; \
}
store_temp_reg(OVER, max);
-store_temp_reg(HYST, hyst);
+store_temp_reg(HYST, max_hyst);

#define sysfs_temp_offset(offset) \
static ssize_t \
@@ -500,7 +500,7 @@
#define sysfs_temp_offsets(offset) \
sysfs_temp_offset(offset); \
sysfs_temp_reg_offset(max, offset); \
-sysfs_temp_reg_offset(hyst, offset);
+sysfs_temp_reg_offset(max_hyst, offset);

sysfs_temp_offsets(1);
sysfs_temp_offsets(2);
@@ -510,7 +510,7 @@
do { \
device_create_file(&client->dev, &dev_attr_temp##offset##_input); \
device_create_file(&client->dev, &dev_attr_temp##offset##_max); \
-device_create_file(&client->dev, &dev_attr_temp##offset##_hyst); \
+device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \
} while (0)

static ssize_t
@@ -525,9 +525,9 @@
}

static
-DEVICE_ATTR(vid, S_IRUGO, show_vid_reg, NULL)
+DEVICE_ATTR(in0_ref, S_IRUGO, show_vid_reg, NULL)
#define device_create_file_vid(client) \
-device_create_file(&client->dev, &dev_attr_vid);
+device_create_file(&client->dev, &dev_attr_in0_ref);
static ssize_t
show_vrm_reg(struct device *dev, char *buf)
{
@@ -808,7 +808,7 @@
{ \
return store_pwm_reg(dev, buf, count, offset); \
} \
-static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, show_regs_pwm_##offset, store_regs_pwm_##offset)
+static DEVICE_ATTR(fan##offset##_pwm, S_IRUGO | S_IWUSR, show_regs_pwm_##offset, store_regs_pwm_##offset)

#define sysfs_pwmenable(offset) \
static ssize_t show_regs_pwmenable_##offset (struct device *dev, char *buf) \
@@ -819,7 +819,7 @@
{ \
return store_pwmenable_reg(dev, buf, count, offset); \
} \
-static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, show_regs_pwmenable_##offset, store_regs_pwmenable_##offset)
+static DEVICE_ATTR(fan##offset##_pwm_enable, S_IRUGO | S_IWUSR, show_regs_pwmenable_##offset, store_regs_pwmenable_##offset)

sysfs_pwm(1);
sysfs_pwm(2);
@@ -829,12 +829,12 @@

#define device_create_file_pwm(client, offset) \
do { \
-device_create_file(&client->dev, &dev_attr_pwm##offset); \
+device_create_file(&client->dev, &dev_attr_fan##offset##_pwm); \
} while (0)

#define device_create_file_pwmenable(client, offset) \
do { \
-device_create_file(&client->dev, &dev_attr_pwm##offset##_enable); \
+device_create_file(&client->dev, &dev_attr_fan##offset##_pwm_enable); \
} while (0)

static ssize_t
@@ -901,7 +901,7 @@
{ \
return store_sensor_reg(dev, buf, count, offset); \
} \
-static DEVICE_ATTR(sensor##offset, S_IRUGO | S_IWUSR, show_regs_sensor_##offset, store_regs_sensor_##offset)
+static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, show_regs_sensor_##offset, store_regs_sensor_##offset)

sysfs_sensor(1);
sysfs_sensor(2);
@@ -909,7 +909,7 @@

#define device_create_file_sensor(client, offset) \
do { \
-device_create_file(&client->dev, &dev_attr_sensor##offset); \
+device_create_file(&client->dev, &dev_attr_temp##offset##_type); \
} while (0)

#ifdef W83781D_RT
@@ -1698,13 +1698,13 @@
data->temp = w83781d_read_value(client, W83781D_REG_TEMP(1));
data->temp_max =
w83781d_read_value(client, W83781D_REG_TEMP_OVER(1));
- data->temp_hyst =
+ data->temp_max_hyst =
w83781d_read_value(client, W83781D_REG_TEMP_HYST(1));
data->temp_add[0] =
w83781d_read_value(client, W83781D_REG_TEMP(2));
data->temp_max_add[0] =
w83781d_read_value(client, W83781D_REG_TEMP_OVER(2));
- data->temp_hyst_add[0] =
+ data->temp_max_hyst_add[0] =
w83781d_read_value(client, W83781D_REG_TEMP_HYST(2));
if (data->type != w83783s && data->type != w83697hf) {
data->temp_add[1] =
@@ -1712,7 +1712,7 @@
data->temp_max_add[1] =
w83781d_read_value(client,
W83781D_REG_TEMP_OVER(3));
- data->temp_hyst_add[1] =
+ data->temp_max_hyst_add[1] =
w83781d_read_value(client,
W83781D_REG_TEMP_HYST(3));
}

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/