LSI Logic FC HBA / mptscsih hang

[Jan-Frode Myklebust]

I just got a LSI Logic LSI7102XP-LC Single 2Gb/s Fibre Channel HBA,
and installed it in a IBM x330 (Dual Pentium III). Booting the redhat
kernel-2.4.21-4.EL and kernel-2.4.21-9.0.1.EL works fine, but the
smp-versions of the same kernels (kernel-smp-2.4.21-4.EL and
kernel-smp-2.4.21-9.0.1.EL) hangs every time after:

Loading mptbase.Fusion MPT base driver 2.05.05+
o module
Copyright (c) 1999-2002 LSI Logic Corporation
PCI: Enabling device 01:05.0 (0000 -> 0003)
mptbase: Initiating ioc0 bringup
ioc0: FC919X: Capabilities={Initiator,Target,LAN}
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
mptbase: 1 MPT adapter found, 1 installed.
Loading mptscsihFusion MPT SCSI Host driver 2.05.05+
.o module
scsi1 : ioc0: LSIFC919X, FwRev=01000000h, Ports=1, MaxQ=1023, IRQ=11
Starting timer : 0 0
blk: queue f752d618, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
scsi : aborting command due to timeout : pid 25, scsi1, channel 0, id
0, lun 0 Inquiry 00 00 00 ff 00
mptscsih: OldAbort scheduling ABORT SCSI IO (sc=f752d400)
  IOs outstanding = 1
mptscsih: Attempting ABORT SCSI IO! (mf=f74e0100:sc=f752d400)
SCSI host 1 abort (pid 25) timed out - resetting
SCSI bus is being reset for host 1 channel 0.
mptscsih: OldReset scheduling BUS_RESET (sc=f752d400)
  IOs outstanding = 1
SCSI host 1 channel 0 reset (pid 25) timed out - trying harder
SCSI bus is being reset for host 1 channel 0.
mptscsih: OldReset scheduling BUS_RESET (sc=f752d400)
  IOs outstanding = 1
SCSI host 1 reset (pid 25) timed out again -
probably an unrecoverable SCSI bus or device hang.
mptbase: Initiating ioc0 recovery
SCSI host 1 reset (pid 26) timed out again -
probably an unrecoverable SCSI bus or device hang.
[hangs forever..]

Any advice?


   -jf
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/