Re: e100 NETDEV WATCHDOG transmit timeout since 2.6.4

From: Eamonn Hamilton
Date: Wed Apr 21 2004 - 04:48:04 EST


Hi Scott,

Thanks for the patch - a bit of manual fumbling to get it applied, but
it seems to work ok so far ( ~46 minutes, so it's not exactly definitive
:)

Certainly it doesn't make things worse in my case at least.

Cheers,
Eamonn

On Wed, 2004-04-21 at 00:04, Scott Feldman wrote:
> On Tue, 20 Apr 2004, Mike Keehan wrote:
>
> > I am getting these too in recent kernels, but only on a
> > 10Mhz half-duplex network. I have to manually down
> > and up the interface to recover.
> >
> > On a 100Mhz switched network, the e100 is OK (at least 12hours+).
>
>
> Mike/Eamonn,
>
> Give this patch a try. This adds a required workaround for ICH when
> working at 10/Half. (Guessing you have an ICH system).
>
> --- linux-2.5/drivers/net/e100.c 2004-04-20 15:52:24.000000000 -0700
> +++ linux-2.5/drivers/net/e100.c.mod 2004-04-20 15:55:32.000000000 -0700
> @@ -287,6 +287,7 @@ enum scb_cmd_hi {
> };
>
> enum scb_cmd_lo {
> + cuc_nop = 0x00,
> ruc_start = 0x01,
> ruc_load_base = 0x06,
> cuc_start = 0x10,
> @@ -514,10 +515,11 @@ struct nic {
> /* End: frequently used values: keep adjacent for cache effect */
>
> enum {
> - ich = (1 << 0),
> - promiscuous = (1 << 1),
> - multicast_all = (1 << 2),
> - wol_magic = (1 << 3),
> + ich = (1 << 0),
> + promiscuous = (1 << 1),
> + multicast_all = (1 << 2),
> + wol_magic = (1 << 3),
> + ich_10h_workaround = (1 << 4),
> } flags ____cacheline_aligned;
>
> enum mac mac;
> @@ -1225,6 +1227,12 @@ static void e100_watchdog(unsigned long
> /* Issue a multicast command to workaround a 557 lock up */
> e100_set_multicast_list(nic->netdev);
>
> + if(nic->flags & ich && cmd.speed==SPEED_10 && cmd.duplex==DUPLEX_HALF)
> + /* Need SW workaround for ICH[x] 10Mbps/half duplex Tx hang. */
> + nic->flags |= ich_10h_workaround;
> + else
> + nic->flags &= ~ich_10h_workaround;
> +
> mod_timer(&nic->watchdog, jiffies + E100_WATCHDOG_PERIOD);
> }
>
> @@ -1244,7 +1252,17 @@ static inline void e100_xmit_prepare(str
> static int e100_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
> {
> struct nic *nic = netdev->priv;
> - int err = e100_exec_cb(nic, skb, e100_xmit_prepare);
> + int err;
> +
> + if(nic->flags & ich_10h_workaround) {
> + /* SW workaround for ICH[x] 10Mbps/half duplex Tx hang.
> + Issue a NOP command followed by a 1us delay before
> + issuing the Tx command. */
> + e100_exec_cmd(nic, cuc_nop, 0);
> + udelay(1);
> + }
> +
> + err = e100_exec_cb(nic, skb, e100_xmit_prepare);
>
> switch(err) {
> case -ENOSPC:
--
Eamonn Hamilton

Senior Technical Designer
Technical Projects and Design (North)

Tel : +44 (0) 1224 333833
Fax : +44 (0) 1224 840032
Email eamonn.hamilton@xxxxxxxx

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/