Re: 8139too not working in 2.6 (works now)

[Mirko Caserta]

I tried "acpi=off" and it worked like a charm. He's the new  
/proc/interrupts:

carbon:~# cat /proc/interrupts
           CPU0       CPU1
  0:     857627         12    IO-APIC-edge  timer
  1:       1073          0    IO-APIC-edge  i8042
  2:          0          0          XT-PIC  cascade
  8:          1          1    IO-APIC-edge  rtc
 12:         87          0    IO-APIC-edge  i8042
 14:       4103          2    IO-APIC-edge  ide0
 15:       4900          2    IO-APIC-edge  ide1
 21:       4505          1   IO-APIC-level  eth0
 27:       1484          0   IO-APIC-level  i91u, uhci_hcd, uhci_hcd,  
uhci_hcd
NMI:          0          0
LOC:     857482     857455
ERR:          0
MIS:          0

Hope this helps someone else too.

Thanks a lot, Mirko.

On Tue, 27 Apr 2004 00:14:29 +0900, OGAWA Hirofumi  
<hirofumi@xxxxxxxxxxxxxxxxxx> wrote:

> "Mirko Caserta" <mirko@xxxxxxxxxxxx> writes:
>
> > Anyway, it doesn't look like an irq problem to me. It looks more like
> > a  wrong detection of the TX triggering level in the driver.
>
> In interrupts-2.6.6-rc2-mm2-broken-out,
>
>            CPU0       CPU1
>   0:     103394         48    IO-APIC-edge  timer
>   1:        157          0    IO-APIC-edge  i8042
>   5:          2          1    IO-APIC-edge  eth0
>                               ^^^^^^^^^^^^-- wrong
>   8:          2          0    IO-APIC-edge  rtc
>   9:          0          0   IO-APIC-level  acpi
>  11:          3          1    IO-APIC-edge  i91u
>  12:         87          0    IO-APIC-edge  i8042
>  14:       1068          2    IO-APIC-edge  ide0
>  15:        953          1    IO-APIC-edge  ide1
>
> The above must be IO-APIC-level.
> And the following is interesting one.
>
>     ACPI: ACPI tables contain no PCI IRQ routing entries
>     PCI: Invalid ACPI-PCI IRQ routing table
>     PCI: Probing PCI hardware
>     PCI: Using IRQ router default [1106/3091] at 0000:00:00.0
>     PCI BIOS passed nonexistent PCI bus 0!
>     PCI BIOS passed nonexistent PCI bus 0!
>     PCI BIOS passed nonexistent PCI bus 0!
>     PCI BIOS passed nonexistent PCI bus 0!
>     PCI BIOS passed nonexistent PCI bus 0!
>     PCI BIOS passed nonexistent PCI bus 1!
>     PCI BIOS passed nonexistent PCI bus 0!
>
> Um.. can you try "pci=noacpi" or "acpi=off"?


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/