Re: logitech mouseMan wheel doesn't work with 2.6.5

[Erik Steffl]

Dmitry Torokhov wrote:
> If I may chime in...
>
> On Wednesday 28 April 2004 03:21 am, Erik Steffl wrote:
>  
>
> > input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
> > input: ExPS/2 Generic Explorer Mouse on isa0060/serio1
> > input: PS2++ Logitech Mouse on isa0060/serio1
> > input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
> > input: ExPS/2 Generic Explorer Mouse on isa0060/serio1
> > input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
> > input: PS2++ Logitech Mouse on isa0060/serio1
> > input: PS/2 Generic Mouse on isa0060/serio1
> > input: PS/2 Generic Mouse on isa0060/serio1
> > input: ExPS/2 Generic Explorer Mouse on isa0060/serio1
>
>
> So your mouse pretty much can work with any protocol... Now could you please

  it does NOT work with any protocol.

  there are two problems:

  wheel:

  turning of the wheel in both direction produces 8, 0, 0 (which seems 
to mean any button down), all other buttons produces 8, 0, 0 on button 
down and x, 0, 0 on button up (x depends on button).

  side button: produces exactly same numbers as middle button (clicking 
the wheel, 12, 0, 0 on button up).

  that's with most protocols, some protocols (ps2pp, bare, genps) 
ignore the wheel completely (as far as I can tell that's OK)

> re-load the module without any parameters and post the output of
> "cat /proc/bus/input/devices"

jojda:/home/erik# rmmod psmouse
jojda:/home/erik# modprobe -v psmouse
insmod /lib/modules/2.6.5/kernel/drivers/input/mouse/psmouse.ko
jojda:/home/erik# cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event0
B: EV=120003
B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: LED=7

I: Bus=0011 Vendor=0002 Product=0020 Version=0038
N: Name="ImPS/2 Logitech Wheel Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse0 event1
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103

jojda:/home/erik#

> Also compile evbug module, insert it in the kernel (with psmouse loaded as
> well), hit all buttons again and post the excerpt of dmesg with evbug data.
> I want to make sure that your button is not identified correctly as opposed
> to some data lost in protocol transformation.

  ok, I'll try that (have nobody to push the mouse buttons right now)

> What protocol are you using in XFree?

  that's irrelevant, I got the results above without X running (by 
reading /dev/psaux). In case it might shed some light anyway, here's the 
X info: protocol is MouseManPlusPS/2, it worked with kernel 2.4.x. Now 
(with 2.6.5) X reports same results as you see above (using xev I see 
the wheel is no event, side button is button 2, just like wheel click)

	erik

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/